lkml.org 
[lkml]   [2020]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 24/25] clk: bcm: rpi: Remove the quirks for the CPU clock
Date
The CPU clock has had so far a bunch of quirks to expose the clock tree
properly, but since we reverted to exposing them through the MMIO driver,
we can remove that code from the firmware driver.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/clk/bcm/clk-raspberrypi.c | 156 +-------------------------------
1 file changed, 156 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index cee634cb5323..c3c6fafcd101 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -152,13 +152,6 @@ static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw,
return val;
}

-static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- return raspberrypi_fw_get_rate(hw, parent_rate) *
- RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-}
-
static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
@@ -177,142 +170,6 @@ static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate,
return ret;
}

-static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
-
- return raspberrypi_fw_set_rate(hw, new_rate, parent_rate);
-}
-
-/*
- * Sadly there is no firmware rate rounding interface. We borrowed it from
- * clk-bcm2835.
- */
-static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
- struct clk_rate_request *req)
-{
- u64 div, final_rate;
- u32 ndiv, fdiv;
-
- /* We can't use req->rate directly as it would overflow */
- final_rate = clamp(req->rate, req->min_rate, req->max_rate);
-
- div = (u64)final_rate << A2W_PLL_FRAC_BITS;
- do_div(div, req->best_parent_rate);
-
- ndiv = div >> A2W_PLL_FRAC_BITS;
- fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
-
- final_rate = ((u64)req->best_parent_rate *
- ((ndiv << A2W_PLL_FRAC_BITS) + fdiv));
-
- req->rate = final_rate >> A2W_PLL_FRAC_BITS;
-
- return 0;
-}
-
-static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
- .is_prepared = raspberrypi_fw_is_prepared,
- .recalc_rate = raspberrypi_fw_pll_get_rate,
- .set_rate = raspberrypi_fw_pll_set_rate,
- .determine_rate = raspberrypi_pll_determine_rate,
-};
-
-static struct clk_hw *raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
-{
- struct raspberrypi_clk_data *data;
- struct clk_init_data init = {};
- u32 min_rate = 0, max_rate = 0;
- int ret;
-
- data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return ERR_PTR(-ENOMEM);
- data->rpi = rpi;
- data->id = RPI_FIRMWARE_ARM_CLK_ID;
-
- /* All of the PLLs derive from the external oscillator. */
- init.parent_names = (const char *[]){ "osc" };
- init.num_parents = 1;
- init.name = "pllb";
- init.ops = &raspberrypi_firmware_pll_clk_ops;
- init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED;
-
- /* Get min & max rates set by the firmware */
- ret = raspberrypi_clock_property(rpi->firmware, data,
- RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
- &min_rate);
- if (ret) {
- dev_err(rpi->dev, "Failed to get %s min freq: %d\n",
- init.name, ret);
- return ERR_PTR(ret);
- }
-
- ret = raspberrypi_clock_property(rpi->firmware, data,
- RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
- &max_rate);
- if (ret) {
- dev_err(rpi->dev, "Failed to get %s max freq: %d\n",
- init.name, ret);
- return ERR_PTR(ret);
- }
-
- if (!min_rate || !max_rate) {
- dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n",
- min_rate, max_rate);
- return ERR_PTR(-EINVAL);
- }
-
- dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n",
- min_rate, max_rate);
-
- data->hw.init = &init;
-
- ret = devm_clk_hw_register(rpi->dev, &data->hw);
- if (ret)
- return ERR_PTR(ret);
-
- clk_hw_set_rate_range(&data->hw,
- min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE,
- max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE);
-
- return &data->hw;
-}
-
-static struct clk_fixed_factor raspberrypi_clk_pllb_arm = {
- .mult = 1,
- .div = 2,
- .hw.init = &(struct clk_init_data) {
- .name = "pllb_arm",
- .parent_names = (const char *[]){ "pllb" },
- .num_parents = 1,
- .ops = &clk_fixed_factor_ops,
- .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
- },
-};
-
-static struct clk_hw *raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi)
-{
- int ret;
-
- ret = devm_clk_hw_register(rpi->dev, &raspberrypi_clk_pllb_arm.hw);
- if (ret) {
- dev_err(rpi->dev, "Failed to initialize pllb_arm\n");
- return ERR_PTR(ret);
- }
-
- ret = devm_clk_hw_register_clkdev(rpi->dev,
- &raspberrypi_clk_pllb_arm.hw,
- NULL, "cpu0");
- if (ret) {
- dev_err(rpi->dev, "Failed to initialize clkdev\n");
- return ERR_PTR(ret);
- }
-
- return &raspberrypi_clk_pllb_arm.hw;
-}
-
static int raspberrypi_fw_dumb_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
@@ -341,19 +198,6 @@ static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi,
u32 min_rate, max_rate;
int ret;

- if (id == RPI_FIRMWARE_ARM_CLK_ID) {
- struct clk_hw *hw;
-
- hw = raspberrypi_register_pllb(rpi);
- if (IS_ERR(hw)) {
- dev_err(rpi->dev, "Failed to initialize pllb, %ld\n",
- PTR_ERR(hw));
- return hw;
- }
-
- return raspberrypi_register_pllb_arm(rpi);
- }
-
data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return ERR_PTR(-ENOMEM);
--
git-series 0.9.1
\
 
 \ /
  Last update: 2020-05-27 17:47    [W:0.163 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site