Messages in this thread | | | From | Michael Walle <> | Subject | [PATCH v5 0/2] gpio: generic regmap implementation | Date | Thu, 28 May 2020 05:58:39 +0200 |
| |
This series is a split off of the sl28cpld series: https://lore.kernel.org/linux-gpio/20200423174543.17161-1-michael@walle.cc/
I wasn't sure if I should also include the gpiochip_irqchip_add_domain() patch here. So feel free to skip it. OTOH if you use interrupts with gpio-regmap it is quite handy.
For an actual user see the patch 11/16 ("gpio: add support for the sl28cpld GPIO controller") of the series above.
Changes since v4: - add comment about can_sleep - fix config->label typo - add config->names property
Changes since v3: - set reg_dat_base, that was actually broken - fix typo - fix swapped reg_in_dir/reg_out_dir documentation - use "goto err" in error path in gpio_regmap_register()
Changes since v2: See changelog in the former patch series.
Michael Walle (2): gpiolib: Introduce gpiochip_irqchip_add_domain() gpio: add a reusable generic gpio_chip using regmap
drivers/gpio/Kconfig | 4 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-regmap.c | 352 ++++++++++++++++++++++++++++++++++++ drivers/gpio/gpiolib.c | 20 ++ include/linux/gpio-regmap.h | 70 +++++++ include/linux/gpio/driver.h | 3 + 6 files changed, 450 insertions(+) create mode 100644 drivers/gpio/gpio-regmap.c create mode 100644 include/linux/gpio-regmap.h
-- 2.20.1
| |