lkml.org 
[lkml]   [2020]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: gadget: aspeed: fixup vhub port irq handling
Hi Ben,

I sent out the follow-on patch per Greg's suggestion, and the purpose is
to include the latest version (v4) of the original commit. As v4 was
already Acked-by you, can I add the tag for this patch? Or are you
willing to Ack it again?


Cheers,

Tao

On Wed, May 27, 2020 at 06:11:54PM -0700, rentao.bupt@gmail.com wrote:
> From: Tao Ren <rentao.bupt@gmail.com>
>
> This is a follow-on patch for commit a23be4ed8f48 ("usb: gadget: aspeed:
> improve vhub port irq handling"): for_each_set_bit() is replaced with
> simple for() loop because for() loop runs faster on ASPEED BMC.
>
> Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
> ---
> drivers/usb/gadget/udc/aspeed-vhub/core.c | 10 +++-------
> drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 3 +++
> 2 files changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
> index cdf96911e4b1..be7bb64e3594 100644
> --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
> +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
> @@ -135,13 +135,9 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
>
> /* Handle device interrupts */
> if (istat & vhub->port_irq_mask) {
> - unsigned long bitmap = istat;
> - int offset = VHUB_IRQ_DEV1_BIT;
> - int size = VHUB_IRQ_DEV1_BIT + vhub->max_ports;
> -
> - for_each_set_bit_from(offset, &bitmap, size) {
> - i = offset - VHUB_IRQ_DEV1_BIT;
> - ast_vhub_dev_irq(&vhub->ports[i].dev);
> + for (i = 0; i < vhub->max_ports; i++) {
> + if (istat & VHUB_DEV_IRQ(i))
> + ast_vhub_dev_irq(&vhub->ports[i].dev);
> }
> }
>
> diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
> index 2e5a1ef14a75..87a5dea12d3c 100644
> --- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
> +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
> @@ -67,6 +67,9 @@
> #define VHUB_IRQ_HUB_EP0_SETUP (1 << 0)
> #define VHUB_IRQ_ACK_ALL 0x1ff
>
> +/* Downstream device IRQ mask. */
> +#define VHUB_DEV_IRQ(n) (VHUB_IRQ_DEVICE1 << (n))
> +
> /* SW reset reg */
> #define VHUB_SW_RESET_EP_POOL (1 << 9)
> #define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8)
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-05-28 03:21    [W:0.069 / U:1.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site