lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 5/8] tpm: Handle an exception for TPM Firmware Update mode.
Date
From: Amir Mizinski <amirmizi6@gmail.com>

An extra precaution for TPM Firmware Update Mode.
For example if TPM power was cut while in Firmware update, platform
should ignore "selftest" failure and skip TPM initialization sequence.

Suggested-by: Benoit Houyere <benoit.houyere@st.com>
Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
---
drivers/char/tpm/tpm2-cmd.c | 4 ++++
include/linux/tpm.h | 1 +
2 files changed, 5 insertions(+)

diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
index 7603295..6e42946 100644
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -727,6 +727,10 @@ int tpm2_auto_startup(struct tpm_chip *chip)
goto out;

rc = tpm2_do_selftest(chip);
+
+ if (rc == TPM2_RC_UPGRADE || rc == TPM2_RC_COMMAND_CODE)
+ return 0;
+
if (rc && rc != TPM2_RC_INITIALIZE)
goto out;

diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index 03e9b18..5a2e031 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -199,6 +199,7 @@ enum tpm2_return_codes {
TPM2_RC_INITIALIZE = 0x0100, /* RC_VER1 */
TPM2_RC_FAILURE = 0x0101,
TPM2_RC_DISABLED = 0x0120,
+ TPM2_RC_UPGRADE = 0x012D,
TPM2_RC_COMMAND_CODE = 0x0143,
TPM2_RC_TESTING = 0x090A, /* RC_WARN */
TPM2_RC_REFERENCE_H0 = 0x0910,
--
2.7.4
\
 
 \ /
  Last update: 2020-05-26 16:18    [W:0.066 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site