lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v12 0/6] Add battery charger driver support for MP2629
Date
changes in v12:
- added SOB Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

changes in v11:
- module_remove part replaced by devm_add_action_or_reset in charger patch
- minor review comments solved in mfd and adc patch

I expect, that Lee will provide an immutable branch for me and
Jonathan once the MFD bits have been reviewed. Please tell me,
if I should prepare one instead.

-- Sebastian

changes in v10:
- fixed typo, \n in dev_err
- dt bindings Warning (unit_address_vs_reg) reported by bot

changes in v9:
- fixed review comments in mp2629 power supply such as resource based
iio channel, replace workqueue by threaded irq, irq get with "_optional"

changes in v8:
- fixed order of call in probe/remove in iio adc
- add ABI documentation for mp2629 power supply

changes in v7:
- fixed probe/remove order, managed and unmanaged call mix use in adc.
- Documentation dual license, i2c node with controller address

Overall looks good to me, FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

One question though in reply to patch 4.

changes in v6:
- removed includes types.h in mfd, of_device.h in adc.
- fixed review comments parentheses, err check, kstrtouint

changes in v5:
- removed platfrom data stored in mfd and directly accessed mfd struct in child
- fixed spell check and capitalization in mfd and documentation

changes in v4:
- fixed capitalization in mfg Kconfig and documentation

changes in v3:
- regmap for children passed using platform data and remove mfd driver info
access directly from children

changes in v2:
- removed EXPORT_SYMBOL of register set/get helper
- regmap bit filed used, fixed other review comments

This patch series add support for Battery charger control driver for Monolithic
Power System's MP2629 chipset, includes MFD driver for ADC battery & input
power supply measurement and battery charger control driver.

Thanks,
Saravanan


Saravanan Sekar (6):
dt-bindings: mfd: add document bindings for mp2629
mfd: mp2629: Add support for mps battery charger
iio: adc: mp2629: Add support for mp2629 ADC driver
power: supply: Add support for mps mp2629 battery charger
power: supply: mp2629: Add impedance compensation config
MAINTAINERS: Add entry for mp2629 Battery Charger driver

.../ABI/testing/sysfs-class-power-mp2629 | 8 +
.../devicetree/bindings/mfd/mps,mp2629.yaml | 62 ++
MAINTAINERS | 5 +
drivers/iio/adc/Kconfig | 10 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/mp2629_adc.c | 208 ++++++
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 2 +
drivers/mfd/mp2629.c | 79 +++
drivers/power/supply/Kconfig | 10 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/mp2629_charger.c | 669 ++++++++++++++++++
include/linux/mfd/mp2629.h | 26 +
13 files changed, 1090 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-class-power-mp2629
create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
create mode 100644 drivers/iio/adc/mp2629_adc.c
create mode 100644 drivers/mfd/mp2629.c
create mode 100644 drivers/power/supply/mp2629_charger.c
create mode 100644 include/linux/mfd/mp2629.h

--
2.17.1

\
 
 \ /
  Last update: 2020-05-26 11:08    [W:0.064 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site