lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] driver core: Update device link status correctly for SYNC_STATE_ONLY links
Am 2020-05-26 21:43, schrieb Saravana Kannan:
> When SYNC_STATE_ONLY support was added in commit 05ef983e0d65 ("driver
> core: Add device link support for SYNC_STATE_ONLY flag"),
> SYNC_STATE_ONLY links were treated similar to STATELESS links in terms
> of not blocking consumer probe if the supplier hasn't probed yet.
>
> That caused a SYNC_STATE_ONLY device link's status to not get updated.
> Since SYNC_STATE_ONLY device link is no longer useful once the
> consumer probes, commit 21c27f06587d ("driver core: Fix
> SYNC_STATE_ONLY device link implementation") addresses the status
> update issue by deleting the SYNC_STATE_ONLY device link instead of
> complicating the status update code.
>
> However, there are still some cases where we need to update the status
> of a SYNC_STATE_ONLY device link. This is because a SYNC_STATE_ONLY
> device link can later get converted into a normal MANAGED device link
> when a normal MANAGED device link is created between a supplier and
> consumer that already have a SYNC_STATE_ONLY device link between them.
>
> If a SYNC_STATE_ONLY device link's status isn't maintained correctly
> till it's converted to a normal MANAGED device link, then the normal
> MANAGED device link will end up with a wrong link status. This can
> cause
> a warning stack trace[1] when the consumer device probes successfully.
>
> This commit fixes the SYNC_STATE_ONLY device link status update issue
> where it wouldn't transition correctly from DL_STATE_DORMANT or
> DL_STATE_AVAILABLE to DL_STATE_CONSUMER_PROBE. It also resets the
> status
> back to DL_STATE_DORMANT or DL_STATE_AVAILABLE if the consumer probe
> fails.
>
> [1] - https://lore.kernel.org/lkml/20200522204120.3b3c9ed6@apollo/
> Fixes: 05ef983e0d65 ("driver core: Add device link support for
> SYNC_STATE_ONLY flag")
> Fixes: 21c27f06587d ("driver core: Fix SYNC_STATE_ONLY device link
> implementation")
> Reported-by: Michael Walle <michael@walle.cc>
> Signed-off-by: Saravana Kannan <saravanak@google.com>
> ---
>
> v1->v2:
> - Added code to "revert" the link status if consumer probe fails
>
> Greg,
>
> I think this is the issue Michael ran into. I'd like him to test the
> fix
> before it's pulled in.
>
> Michael,
>
> If you can test this on the branch you saw the issue in and give a
> Tested-by if it works, that'd be great.

with v2 I'm triggering the
WARN_ON(!(link->status & DL_FLAG_SYNC_STATE_ONLY));
in __device_links_no_driver().

I've added the debug output for this WARN_ON()

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version
5.7.0-rc7-next-20200525-00001-ged5852b8c488-dirty (mw@apollo)
(aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for
Debian) 2.31.1) #836 SMP PREEMPT Tue May 26 23:08:57 CEST 2020
[ 0.000000] Machine model: Kontron SMARC-sAL28 (Single PHY) on SMARC
Eval 2.0 carrier
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000f9c00000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem
0x0000000080000000-0x00000020ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x20ff7fe100-0x20ff7fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000020ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fbdfffff]
[ 0.000000] node 0: [mem 0x0000002080000000-0x00000020ffffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000080000000-0x00000020ffffffff]
[ 0.000000] On node 0 totalpages: 1031680
[ 0.000000] DMA zone: 4096 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 262144 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 3832 pages used for memmap
[ 0.000000] DMA32 zone: 245248 pages, LIFO batch:63
[ 0.000000] Normal zone: 8192 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 30 pages/cpu s82904 r8192 d31784 u122880
[ 0.000000] pcpu-alloc: s82904 r8192 d31784 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or
1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages:
1015560
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: debug root=/dev/mmcblk1p2 rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000]
(64MB)
[ 0.000000] Memory: 3930016K/4126720K available (9532K kernel code,
1114K rwdata, 3556K rodata, 3200K init, 398K bss, 163936K reserved,
32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.000000] ftrace: allocating 32616 entries in 128 pages
[ 0.000000] ftrace: allocated 128 pages with 1 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to
nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16,
nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region
0:0x0000000006040000
[ 0.000000] ITS [mem 0x06020000-0x0603ffff]
[ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices
@20fad80000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x00000020fad30000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table
@0x00000020fad40000
[ 0.000000] random: get_random_bytes called from
start_kernel+0x604/0x7cc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000002] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps
every 4398046511100ns
[ 0.000107] Console: colour dummy device 80x25
[ 0.000391] printk: console [tty0] enabled
[ 0.000439] Calibrating delay loop (skipped), value calculated using
timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.000452] pid_max: default: 32768 minimum: 301
[ 0.000499] LSM: Security Framework initializing
[ 0.000551] Mount-cache hash table entries: 8192 (order: 4, 65536
bytes, linear)
[ 0.000582] Mountpoint-cache hash table entries: 8192 (order: 4,
65536 bytes, linear)
[ 0.001429] rcu: Hierarchical SRCU implementation.
[ 0.001578] Platform MSI: gic-its@6020000 domain created
[ 0.001651] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000
domain created
[ 0.001850] EFI services will not be available.
[ 0.001946] smp: Bringing up secondary CPUs ...
[ 0.002223] Detected PIPT I-cache on CPU1
[ 0.002244] GICv3: CPU1: found redistributor 1 region
0:0x0000000006060000
[ 0.002250] GICv3: CPU1: using allocated LPI pending table
@0x00000020fad50000
[ 0.002273] CPU1: Booted secondary processor 0x0000000001
[0x410fd083]
[ 0.002324] smp: Brought up 1 node, 2 CPUs
[ 0.002350] SMP: Total of 2 processors activated.
[ 0.002358] CPU features: detected: 32-bit EL0 Support
[ 0.002365] CPU features: detected: CRC32 instructions
[ 0.010433] CPU: All CPU(s) started at EL2
[ 0.010452] alternatives: patching kernel code
[ 0.011049] devtmpfs: initialized
[ 0.012987] KASLR disabled due to lack of seed
[ 0.013150] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.013167] futex hash table entries: 512 (order: 3, 32768 bytes,
linear)
[ 0.013938] thermal_sys: Registered thermal governor 'step_wise'
[ 0.014061] DMI not present or invalid.
[ 0.014244] NET: Registered protocol family 16
[ 0.015143] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic
allocations
[ 0.015851] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for
atomic allocations
[ 0.016580] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for
atomic allocations
[ 0.016617] audit: initializing netlink subsys (disabled)
[ 0.016739] audit: type=2000 audit(0.016:1): state=initialized
audit_enabled=0 res=1
[ 0.017038] cpuidle: using governor menu
[ 0.017107] hw-breakpoint: found 6 breakpoint and 4 watchpoint
registers.
[ 0.017137] ASID allocator initialised with 65536 entries
[ 0.017403] Serial: AMBA PL011 UART driver
[ 0.023156] platform 2140000.mmc: Link attempted to 5000000.iommu
0xc0
[ 0.023170] platform 2140000.mmc: Link done to 5000000.iommu 0xc0 0
[ 0.023193] platform 2150000.mmc: Link attempted to 5000000.iommu
0xc0
[ 0.023202] platform 2150000.mmc: Link done to 5000000.iommu 0xc0 0
[ 0.023265] platform 22c0000.dma-controller: Link attempted to
5000000.iommu 0xc0
[ 0.023275] platform 22c0000.dma-controller: Link done to
5000000.iommu 0xc0 0
[ 0.023317] platform 3100000.usb: Link attempted to 5000000.iommu
0xc0
[ 0.023325] platform 3100000.usb: Link done to 5000000.iommu 0xc0 0
[ 0.023341] platform 3110000.usb: Link attempted to 5000000.iommu
0xc0
[ 0.023349] platform 3110000.usb: Link done to 5000000.iommu 0xc0 0
[ 0.023375] platform 3400000.pcie: Link attempted to 5000000.iommu
0xc0
[ 0.023383] platform 3400000.pcie: Link done to 5000000.iommu 0xc0 0
[ 0.023406] platform 3500000.pcie: Link attempted to 5000000.iommu
0xc0
[ 0.023414] platform 3500000.pcie: Link done to 5000000.iommu 0xc0 0
[ 0.023431] platform 8380000.dma-controller: Link attempted to
5000000.iommu 0xc0
[ 0.023441] platform 8380000.dma-controller: Link done to
5000000.iommu 0xc0 0
[ 0.023540] platform 1f0000000.pcie: Link attempted to 5000000.iommu
0xc0
[ 0.023548] platform 1f0000000.pcie: Link done to 5000000.iommu 0xc0
0
[ 0.023591] platform f080000.display: Link attempted to 5000000.iommu
0xc0
[ 0.023600] platform f080000.display: Link done to 5000000.iommu 0xc0
0
[ 0.023867] Machine: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval
2.0 carrier
[ 0.023877] SoC family: QorIQ LS1028A
[ 0.023882] SoC ID: svr:0x870b0110, Revision: 1.0
[ 0.026885] HugeTLB registered 1.00 GiB page size, pre-allocated 0
pages
[ 0.026899] HugeTLB registered 32.0 MiB page size, pre-allocated 0
pages
[ 0.026907] HugeTLB registered 2.00 MiB page size, pre-allocated 0
pages
[ 0.026915] HugeTLB registered 64.0 KiB page size, pre-allocated 0
pages
[ 0.027977] cryptd: max_cpu_qlen set to 1000
[ 0.029319] ------------[ cut here ]------------
[ 0.029332] sup:5000000.iommu - con:22c0000.dma-controller f:192 s:2
[ 0.029369] WARNING: CPU: 0 PID: 1 at drivers/base/core.c:993
__device_links_no_driver+0xf0/0xf8
[ 0.029377] Modules linked in:
[ 0.029387] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.7.0-rc7-next-20200525-00001-ged5852b8c488-dirty #836
[ 0.029396] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC
Eval 2.0 carrier (DT)
[ 0.029407] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[ 0.029414] pc : __device_links_no_driver+0xf0/0xf8
[ 0.029421] lr : __device_links_no_driver+0xf0/0xf8
[ 0.029426] sp : ffff80001118bbb0
[ 0.029432] x29: ffff80001118bbb0 x28: 0000000000000000
[ 0.029440] x27: 0000000000000004 x26: ffff800010cd04e8
[ 0.029447] x25: ffff800010d51950 x24: ffff00207a41bc10
[ 0.029455] x23: 0000000000000001 x22: ffff800010bd4698
[ 0.029462] x21: ffff00207a41bcb0 x20: ffff00207a401080
[ 0.029469] x19: ffff00207a41bc90 x18: 0000000000000010
[ 0.029476] x17: 0000000057af2a13 x16: 00000000ad23dded
[ 0.029483] x15: ffffffffffffffff x14: 0720072007200720
[ 0.029490] x13: 0720072007200720 x12: 07200732073a0773
[ 0.029497] x11: 0720073207390731 x10: 073a076607200772
[ 0.029504] x9 : ffff800010091f64 x8 : 07720774076e076f
[ 0.029511] x7 : 0000000000000087 x6 : ffff00207ac21f00
[ 0.029518] x5 : 0000000000000000 x4 : 0000000000000000
[ 0.029525] x3 : 00000000ffffffff x2 : ffff80001101b6c8
[ 0.029531] x1 : 3ee0a21bc55cf800 x0 : 0000000000000000
[ 0.029539] Call trace:
[ 0.029546] __device_links_no_driver+0xf0/0xf8
[ 0.029553] device_links_no_driver+0x74/0x90
[ 0.029561] really_probe+0x1ac/0x318
[ 0.029568] driver_probe_device+0x40/0x90
[ 0.029574] device_driver_attach+0x7c/0x88
[ 0.029581] __driver_attach+0x60/0xe8
[ 0.029588] bus_for_each_dev+0x7c/0xd0
[ 0.029594] driver_attach+0x2c/0x38
[ 0.029600] bus_add_driver+0x194/0x1f8
[ 0.029607] driver_register+0x6c/0x128
[ 0.029614] __platform_driver_register+0x50/0x60
[ 0.029623] fsl_edma_init+0x24/0x30
[ 0.029631] do_one_initcall+0x54/0x298
[ 0.029639] kernel_init_freeable+0x1ec/0x268
[ 0.029648] kernel_init+0x1c/0x118
[ 0.029655] ret_from_fork+0x10/0x1c
[ 0.029662] ---[ end trace e2cf5516fda822af ]---
[ 0.029799] iommu: Default domain type: Translated
[ 0.029862] vgaarb: loaded
[ 0.030000] SCSI subsystem initialized
[ 0.030088] usbcore: registered new interface driver usbfs
[ 0.030113] usbcore: registered new interface driver hub
[ 0.030144] usbcore: registered new device driver usb
[ 0.030277] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not
supported
[ 0.030456] i2c i2c-0: IMX I2C adapter registered
[ 0.030531] imx-i2c 2030000.i2c: can't get pinctrl, bus recovery not
supported
[ 0.030607] i2c i2c-1: IMX I2C adapter registered
[ 0.030679] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not
supported
[ 0.030778] i2c i2c-2: IMX I2C adapter registered
[ 0.030861] pps_core: LinuxPPS API ver. 1 registered
[ 0.030868] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 0.030882] PTP clock support registered
[ 0.031108] Advanced Linux Sound Architecture Driver Initialized.
[ 0.031461] clocksource: Switched to clocksource arch_sys_counter
[ 0.067525] VFS: Disk quotas dquot_6.6.0
[ 0.067570] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.070282] NET: Registered protocol family 2
[ 0.070514] tcp_listen_portaddr_hash hash table entries: 2048 (order:
3, 32768 bytes, linear)
[ 0.070538] TCP established hash table entries: 32768 (order: 6,
262144 bytes, linear)
[ 0.070630] TCP bind hash table entries: 32768 (order: 7, 524288
bytes, linear)
[ 0.070936] TCP: Hash tables configured (established 32768 bind
32768)
[ 0.071035] UDP hash table entries: 2048 (order: 4, 65536 bytes,
linear)
[ 0.071063] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes,
linear)
[ 0.071149] NET: Registered protocol family 1
[ 0.071169] PCI: CLS 0 bytes, default 64
[ 0.071528] hw perfevents: enabled with armv8_cortex_a72 PMU driver,
7 counters available
[ 0.071984] Initialise system trusted keyrings
[ 0.072111] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 0.105492] Key type asymmetric registered
[ 0.105506] Asymmetric key parser 'x509' registered
[ 0.105533] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 248)
[ 0.105543] io scheduler mq-deadline registered
[ 0.105550] io scheduler kyber registered
[ 0.105982] pci-host-generic 1f0000000.pcie: host bridge
/soc/pcie@1f0000000 ranges:
[ 0.106010] pci-host-generic 1f0000000.pcie: MEM
0x01f8000000..0x01f815ffff -> 0x0000000000
[ 0.106031] pci-host-generic 1f0000000.pcie: MEM
0x01f8160000..0x01f81cffff -> 0x0000000000
[ 0.106051] pci-host-generic 1f0000000.pcie: MEM
0x01f81d0000..0x01f81effff -> 0x0000000000
[ 0.106070] pci-host-generic 1f0000000.pcie: MEM
0x01f81f0000..0x01f820ffff -> 0x0000000000
[ 0.106090] pci-host-generic 1f0000000.pcie: MEM
0x01f8210000..0x01f822ffff -> 0x0000000000
[ 0.106109] pci-host-generic 1f0000000.pcie: MEM
0x01f8230000..0x01f824ffff -> 0x0000000000
[ 0.106123] pci-host-generic 1f0000000.pcie: MEM
0x01fc000000..0x01fc3fffff -> 0x0000000000
[ 0.106174] pci-host-generic 1f0000000.pcie: ECAM at [mem
0x1f0000000-0x1f00fffff] for [bus 00]
[ 0.106234] pci-host-generic 1f0000000.pcie: PCI host bridge to bus
0000:00
[ 0.106244] pci_bus 0000:00: root bus resource [bus 00]
[ 0.106253] pci_bus 0000:00: root bus resource [mem
0x1f8000000-0x1f815ffff] (bus address [0x00000000-0x0015ffff])
[ 0.106264] pci_bus 0000:00: root bus resource [mem
0x1f8160000-0x1f81cffff pref] (bus address [0x00000000-0x0006ffff])
[ 0.106275] pci_bus 0000:00: root bus resource [mem
0x1f81d0000-0x1f81effff] (bus address [0x00000000-0x0001ffff])
[ 0.106286] pci_bus 0000:00: root bus resource [mem
0x1f81f0000-0x1f820ffff pref] (bus address [0x00000000-0x0001ffff])
[ 0.106297] pci_bus 0000:00: root bus resource [mem
0x1f8210000-0x1f822ffff] (bus address [0x00000000-0x0001ffff])
[ 0.106308] pci_bus 0000:00: root bus resource [mem
0x1f8230000-0x1f824ffff pref] (bus address [0x00000000-0x0001ffff])
[ 0.106318] pci_bus 0000:00: root bus resource [mem
0x1fc000000-0x1fc3fffff] (bus address [0x00000000-0x003fffff])
[ 0.106340] pci 0000:00:00.0: [1957:e100] type 00 class 0x020001
[ 0.106382] pci 0000:00:00.0: BAR 0: [mem 0x1f8000000-0x1f803ffff
64bit] (from Enhanced Allocation, properties 0x0)
[ 0.106395] pci 0000:00:00.0: BAR 2: [mem 0x1f8160000-0x1f816ffff
64bit pref] (from Enhanced Allocation, properties 0x1)
[ 0.106407] pci 0000:00:00.0: VF BAR 0: [mem 0x1f81d0000-0x1f81dffff
64bit] (from Enhanced Allocation, properties 0x4)
[ 0.106419] pci 0000:00:00.0: VF BAR 2: [mem 0x1f81f0000-0x1f81fffff
64bit pref] (from Enhanced Allocation, properties 0x3)
[ 0.106444] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.106458] pci 0000:00:00.0: VF(n) BAR0 space: [mem
0x1f81d0000-0x1f81effff 64bit] (contains BAR0 for 2 VFs)
[ 0.106469] pci 0000:00:00.0: VF(n) BAR2 space: [mem
0x1f81f0000-0x1f820ffff 64bit pref] (contains BAR2 for 2 VFs)
[ 0.106585] pci 0000:00:00.1: [1957:e100] type 00 class 0x020001
[ 0.106615] pci 0000:00:00.1: BAR 0: [mem 0x1f8040000-0x1f807ffff
64bit] (from Enhanced Allocation, properties 0x0)
[ 0.106627] pci 0000:00:00.1: BAR 2: [mem 0x1f8170000-0x1f817ffff
64bit pref] (from Enhanced Allocation, properties 0x1)
[ 0.106639] pci 0000:00:00.1: VF BAR 0: [mem 0x1f8210000-0x1f821ffff
64bit] (from Enhanced Allocation, properties 0x4)
[ 0.106650] pci 0000:00:00.1: VF BAR 2: [mem 0x1f8230000-0x1f823ffff
64bit pref] (from Enhanced Allocation, properties 0x3)
[ 0.106673] pci 0000:00:00.1: PME# supported from D0 D3hot
[ 0.106686] pci 0000:00:00.1: VF(n) BAR0 space: [mem
0x1f8210000-0x1f822ffff 64bit] (contains BAR0 for 2 VFs)
[ 0.106697] pci 0000:00:00.1: VF(n) BAR2 space: [mem
0x1f8230000-0x1f824ffff 64bit pref] (contains BAR2 for 2 VFs)
[ 0.106788] pci 0000:00:00.2: [1957:e100] type 00 class 0x020001
[ 0.106818] pci 0000:00:00.2: BAR 0: [mem 0x1f8080000-0x1f80bffff
64bit] (from Enhanced Allocation, properties 0x0)
[ 0.106830] pci 0000:00:00.2: BAR 2: [mem 0x1f8180000-0x1f818ffff
64bit pref] (from Enhanced Allocation, properties 0x1)
[ 0.106852] pci 0000:00:00.2: PME# supported from D0 D3hot
[ 0.106934] pci 0000:00:00.3: [1957:ee01] type 00 class 0x088001
[ 0.106967] pci 0000:00:00.3: BAR 0: [mem 0x1f8100000-0x1f811ffff
64bit] (from Enhanced Allocation, properties 0x0)
[ 0.106979] pci 0000:00:00.3: BAR 2: [mem 0x1f8190000-0x1f819ffff
64bit pref] (from Enhanced Allocation, properties 0x1)
[ 0.107000] pci 0000:00:00.3: PME# supported from D0 D3hot
[ 0.107086] pci 0000:00:00.4: [1957:ee02] type 00 class 0x088001
[ 0.107117] pci 0000:00:00.4: BAR 0: [mem 0x1f8120000-0x1f813ffff
64bit] (from Enhanced Allocation, properties 0x0)
[ 0.107129] pci 0000:00:00.4: BAR 2: [mem 0x1f81a0000-0x1f81affff
64bit pref] (from Enhanced Allocation, properties 0x1)
[ 0.107150] pci 0000:00:00.4: PME# supported from D0 D3hot
[ 0.107238] pci 0000:00:00.5: [1957:eef0] type 00 class 0x020801
[ 0.107268] pci 0000:00:00.5: BAR 0: [mem 0x1f8140000-0x1f815ffff
64bit] (from Enhanced Allocation, properties 0x0)
[ 0.107279] pci 0000:00:00.5: BAR 2: [mem 0x1f81b0000-0x1f81bffff
64bit pref] (from Enhanced Allocation, properties 0x1)
[ 0.107291] pci 0000:00:00.5: BAR 4: [mem 0x1fc000000-0x1fc3fffff
64bit] (from Enhanced Allocation, properties 0x0)
[ 0.107312] pci 0000:00:00.5: PME# supported from D0 D3hot
[ 0.107399] pci 0000:00:00.6: [1957:e100] type 00 class 0x020001
[ 0.107428] pci 0000:00:00.6: BAR 0: [mem 0x1f80c0000-0x1f80fffff
64bit] (from Enhanced Allocation, properties 0x0)
[ 0.107440] pci 0000:00:00.6: BAR 2: [mem 0x1f81c0000-0x1f81cffff
64bit pref] (from Enhanced Allocation, properties 0x1)
[ 0.107481] pci 0000:00:00.6: PME# supported from D0 D3hot
[ 0.108243] pci 0000:00:1f.0: [1957:e001] type 00 class 0x080700
[ 0.108289] OF: /soc/pcie@1f0000000: no msi-map translation for rid
0xf8 on (null)
[ 0.108599] layerscape-pcie 3400000.pcie: host bridge
/soc/pcie@3400000 ranges:
[ 0.108624] layerscape-pcie 3400000.pcie: IO
0x8000010000..0x800001ffff -> 0x0000000000
[ 0.108641] layerscape-pcie 3400000.pcie: MEM
0x8040000000..0x807fffffff -> 0x0040000000
[ 0.108727] layerscape-pcie 3400000.pcie: PCI host bridge to bus
0001:00
[ 0.108737] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.108745] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.108754] pci_bus 0001:00: root bus resource [mem
0x8040000000-0x807fffffff] (bus address [0x40000000-0x7fffffff])
[ 0.108774] pci 0001:00:00.0: [1957:82c1] type 01 class 0x060400
[ 0.108835] pci 0001:00:00.0: supports D1 D2
[ 0.108842] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.110259] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to
01
[ 0.110273] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.110361] layerscape-pcie 3500000.pcie: host bridge
/soc/pcie@3500000 ranges:
[ 0.110385] layerscape-pcie 3500000.pcie: IO
0x8800010000..0x880001ffff -> 0x0000000000
[ 0.110401] layerscape-pcie 3500000.pcie: MEM
0x8840000000..0x887fffffff -> 0x0040000000
[ 0.110478] layerscape-pcie 3500000.pcie: PCI host bridge to bus
0002:00
[ 0.110488] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.110497] pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff]
(bus address [0x0000-0xffff])
[ 0.110508] pci_bus 0002:00: root bus resource [mem
0x8840000000-0x887fffffff] (bus address [0x40000000-0x7fffffff])
[ 0.110528] pci 0002:00:00.0: [1957:82c1] type 01 class 0x060400
[ 0.110586] pci 0002:00:00.0: supports D1 D2
[ 0.110593] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.112016] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to
01
[ 0.112029] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 0.112294] IPMI message handler: version 39.2
[ 0.112320] ipmi device interface
[ 0.112347] ipmi_si: IPMI System Interface driver
[ 0.112467] ipmi_si: Unable to find any System Interface(s)
[ 0.112817] ------------[ cut here ]------------
[ 0.112825] sup:5000000.iommu - con:8380000.dma-controller f:192 s:2
[ 0.112858] WARNING: CPU: 1 PID: 1 at drivers/base/core.c:993
__device_links_no_driver+0xf0/0xf8
[ 0.112866] Modules linked in:
[ 0.112876] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W
5.7.0-rc7-next-20200525-00001-ged5852b8c488-dirty #836
[ 0.112885] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC
Eval 2.0 carrier (DT)
[ 0.112895] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[ 0.112903] pc : __device_links_no_driver+0xf0/0xf8
[ 0.112910] lr : __device_links_no_driver+0xf0/0xf8
[ 0.112915] sp : ffff80001118bbb0
[ 0.112920] x29: ffff80001118bbb0 x28: 0000000000000000
[ 0.112928] x27: 0000000000000006 x26: ffff800010cd04e8
[ 0.112936] x25: ffff800010d51960 x24: ffff00207a422010
[ 0.112943] x23: 0000000000000001 x22: ffff800010bd4698
[ 0.112950] x21: ffff00207a4220b0 x20: ffff00207a401300
[ 0.112957] x19: ffff00207a422090 x18: 0000000000000010
[ 0.112964] x17: 0000000000000001 x16: 0000000000000001
[ 0.112971] x15: ffffffffffffffff x14: 0720072007200720
[ 0.112978] x13: 0720072007200720 x12: 07200732073a0773
[ 0.112985] x11: 0720073207390731 x10: 073a076607200772
[ 0.112992] x9 : ffff800010091f64 x8 : 07720774076e076f
[ 0.112999] x7 : 000000000000012b x6 : ffff00207ac21f00
[ 0.113006] x5 : 0000000000000000 x4 : 0000000000000000
[ 0.113013] x3 : 00000000ffffffff x2 : ffff80001101b6c8
[ 0.113020] x1 : 3ee0a21bc55cf800 x0 : 0000000000000000
[ 0.113027] Call trace:
[ 0.113034] __device_links_no_driver+0xf0/0xf8
[ 0.113041] device_links_no_driver+0x74/0x90
[ 0.113049] really_probe+0x1ac/0x318
[ 0.113056] driver_probe_device+0x40/0x90
[ 0.113062] device_driver_attach+0x7c/0x88
[ 0.113069] __driver_attach+0x60/0xe8
[ 0.113076] bus_for_each_dev+0x7c/0xd0
[ 0.113082] driver_attach+0x2c/0x38
[ 0.113088] bus_add_driver+0x194/0x1f8
[ 0.113095] driver_register+0x6c/0x128
[ 0.113102] __platform_driver_register+0x50/0x60
[ 0.113110] fsl_qdma_driver_init+0x24/0x30
[ 0.113118] do_one_initcall+0x54/0x298
[ 0.113126] kernel_init_freeable+0x1ec/0x268
[ 0.113136] kernel_init+0x1c/0x118
[ 0.113142] ret_from_fork+0x10/0x1c
[ 0.113148] ---[ end trace e2cf5516fda822b0 ]---
[ 0.114250] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.114933] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 16,
base_baud = 12500000) is a 16550A
[ 2.251687] printk: console [ttyS0] enabled
[ 2.256149] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 16,
base_baud = 12500000) is a 16550A
[ 2.265257] 2270000.serial: ttyLP2 at MMIO 0x2270000 (irq = 17,
base_baud = 12500000) is a FSL_LPUART
[ 2.275312] arm-smmu 5000000.iommu: probing hardware configuration...
[ 2.281800] arm-smmu 5000000.iommu: SMMUv2 with:
[ 2.286442] arm-smmu 5000000.iommu: stage 1 translation
[ 2.291787] arm-smmu 5000000.iommu: stage 2 translation
[ 2.297122] arm-smmu 5000000.iommu: nested translation
[ 2.302370] arm-smmu 5000000.iommu: stream matching with 128
register groups
[ 2.309538] arm-smmu 5000000.iommu: 64 context banks (0 stage-2
only)
[ 2.316102] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000
[ 2.322573] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
[ 2.329044] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
[ 2.336017] at24 0-0050: supply vcc not found, using dummy regulator
[ 2.343189] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 32
bytes/write
[ 2.350061] at24 1-0057: supply vcc not found, using dummy regulator
[ 2.357203] at24 1-0057: 8192 byte 24c64 EEPROM, writable, 32
bytes/write
[ 2.364071] at24 2-0050: supply vcc not found, using dummy regulator
[ 2.371205] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 32
bytes/write
[ 2.378152] mpt3sas version 34.100.00.00 loaded
[ 2.383576] spi-nor spi1.0: mx25u3235f (4096 Kbytes)
[ 2.392502] spi-nor spi0.0: w25q32dw (4096 Kbytes)
[ 2.399966] 10 fixed-partitions partitions found on MTD device
20c0000.spi
[ 2.406887] Creating 10 MTD partitions on "20c0000.spi":
[ 2.412237] 0x000000000000-0x000000010000 : "rcw"
[ 2.423775] 0x000000010000-0x000000100000 : "failsafe bootloader"
[ 2.439768] 0x000000100000-0x000000140000 : "failsafe DP firmware"
[ 2.447799] 0x000000140000-0x0000001e0000 : "failsafe trusted
firmware"
[ 2.455792] 0x0000001e0000-0x000000200000 : "reserved"
[ 2.463786] 0x000000200000-0x000000210000 : "configuration store"
[ 2.471793] 0x000000210000-0x000000300000 : "bootloader"
[ 2.479800] 0x000000300000-0x000000340000 : "DP firmware"
[ 2.487782] 0x000000340000-0x0000003e0000 : "trusted firmware"
[ 2.495791] 0x0000003e0000-0x000000400000 : "bootloader environment"
[ 2.504383] libphy: Fixed MDIO Bus: probed
[ 2.508665] mscc_felix 0000:00:00.5: Link attempted to 5000000.iommu
0x54
[ 2.515490] mscc_felix 0000:00:00.5: Link done to 5000000.iommu 0x54
2
[ 2.522081] mscc_felix 0000:00:00.5: Adding to iommu group 0
[ 2.527897] mscc_felix 0000:00:00.5: device is disabled, skipping
[ 2.534057] fsl_enetc 0000:00:00.0: Link attempted to 5000000.iommu
0x54
[ 2.540793] fsl_enetc 0000:00:00.0: Link done to 5000000.iommu 0x54 2
[ 2.547287] fsl_enetc 0000:00:00.0: Adding to iommu group 1
[ 2.659477] fsl_enetc 0000:00:00.0: enabling device (0400 -> 0402)
[ 2.665722] fsl_enetc 0000:00:00.0: no MAC address specified for SI1,
using 0e:87:05:e9:99:e2
[ 2.674289] fsl_enetc 0000:00:00.0: no MAC address specified for SI2,
using 32:0b:6b:3a:49:50
[ 2.683200] libphy: Freescale ENETC MDIO Bus: probed
[ 2.689766] fsl_enetc 0000:00:00.1: Link attempted to 5000000.iommu
0x54
[ 2.696523] fsl_enetc 0000:00:00.1: Link done to 5000000.iommu 0x54 2
[ 2.703027] fsl_enetc 0000:00:00.1: Adding to iommu group 2
[ 2.708717] fsl_enetc 0000:00:00.1: device is disabled, skipping
[ 2.714770] fsl_enetc 0000:00:00.2: Link attempted to 5000000.iommu
0x54
[ 2.721503] fsl_enetc 0000:00:00.2: Link done to 5000000.iommu 0x54 2
[ 2.727995] fsl_enetc 0000:00:00.2: Adding to iommu group 3
[ 2.733665] fsl_enetc 0000:00:00.2: device is disabled, skipping
[ 2.739717] fsl_enetc 0000:00:00.6: Link attempted to 5000000.iommu
0x54
[ 2.746450] fsl_enetc 0000:00:00.6: Link done to 5000000.iommu 0x54 2
[ 2.752940] fsl_enetc 0000:00:00.6: Adding to iommu group 4
[ 2.758606] fsl_enetc 0000:00:00.6: device is disabled, skipping
[ 2.764687] fsl_enetc_mdio 0000:00:00.3: Link attempted to
5000000.iommu 0x54
[ 2.771858] fsl_enetc_mdio 0000:00:00.3: Link done to 5000000.iommu
0x54 2
[ 2.778786] fsl_enetc_mdio 0000:00:00.3: Adding to iommu group 5
[ 2.891472] fsl_enetc_mdio 0000:00:00.3: enabling device (0400 ->
0402)
[ 2.898295] libphy: FSL PCIe IE Central MDIO Bus: probed
[ 2.903665] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.6.0-k
[ 2.910659] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.916345] dwc3 3100000.usb: Link attempted to 5000000.iommu 0x54
[ 2.922556] dwc3 3100000.usb: Link done to 5000000.iommu 0x44 2
[ 2.928513] dwc3 3100000.usb: Adding to iommu group 6
[ 2.933887] dwc3 3110000.usb: Link attempted to 5000000.iommu 0x54
[ 2.940101] dwc3 3110000.usb: Link done to 5000000.iommu 0x44 2
[ 2.946065] dwc3 3110000.usb: Adding to iommu group 7
[ 2.951512] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 2.958069] ehci-pci: EHCI PCI platform driver
[ 2.962698] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.968219] xhci-hcd xhci-hcd.0.auto: new USB bus registered,
assigned bus number 1
[ 2.976061] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci
version 0x100 quirks 0x0000000002010010
[ 2.985516] xhci-hcd xhci-hcd.0.auto: irq 21, io mem 0x03100000
[ 2.991841] hub 1-0:1.0: USB hub found
[ 2.995623] hub 1-0:1.0: 1 port detected
[ 2.999673] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.005189] xhci-hcd xhci-hcd.0.auto: new USB bus registered,
assigned bus number 2
[ 3.012885] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0
SuperSpeed
[ 3.019477] usb usb2: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 3.027812] hub 2-0:1.0: USB hub found
[ 3.031592] hub 2-0:1.0: 1 port detected
[ 3.035670] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.041188] xhci-hcd xhci-hcd.1.auto: new USB bus registered,
assigned bus number 3
[ 3.049019] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci
version 0x100 quirks 0x0000000002010010
[ 3.058478] xhci-hcd xhci-hcd.1.auto: irq 22, io mem 0x03110000
[ 3.064739] hub 3-0:1.0: USB hub found
[ 3.068519] hub 3-0:1.0: 1 port detected
[ 3.072559] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.078075] xhci-hcd xhci-hcd.1.auto: new USB bus registered,
assigned bus number 4
[ 3.085772] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0
SuperSpeed
[ 3.092357] usb usb4: We don't know the algorithms for LPM for this
host, disabling LPM.
[ 3.100693] hub 4-0:1.0: USB hub found
[ 3.104556] hub 4-0:1.0: 1 port detected
[ 3.108685] usbcore: registered new interface driver usb-storage
[ 3.115477] rtc-rv8803 0-0032: Voltage low, temperature compensation
stopped.
[ 3.122652] rtc-rv8803 0-0032: Voltage low, data loss detected.
[ 3.129672] rtc-rv8803 0-0032: Voltage low, data is invalid.
[ 3.135424] rtc-rv8803 0-0032: registered as rtc0
[ 3.140826] rtc-rv8803 0-0032: Voltage low, data is invalid.
[ 3.146516] rtc-rv8803 0-0032: hctosys: unable to read the hardware
clock
[ 3.153411] i2c /dev entries driver
[ 3.162811] sp805-wdt c000000.watchdog: registration successful
[ 3.168849] sp805-wdt c010000.watchdog: registration successful
[ 3.175345] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU
frequency scaling driver
[ 3.183972] sdhci: Secure Digital Host Controller Interface driver
[ 3.190232] sdhci: Copyright(c) Pierre Ossman
[ 3.194656] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.201034] sdhci-esdhc 2140000.mmc: Link attempted to 5000000.iommu
0x54
[ 3.207913] sdhci-esdhc 2140000.mmc: Link done to 5000000.iommu 0x44
2
[ 3.214728] sdhci-esdhc 2140000.mmc: Adding to iommu group 8
[ 3.247591] mmc0: SDHCI controller on 2140000.mmc [2140000.mmc] using
ADMA
[ 3.254738] sdhci-esdhc 2150000.mmc: Link attempted to 5000000.iommu
0x54
[ 3.261670] sdhci-esdhc 2150000.mmc: Link done to 5000000.iommu 0x44
2
[ 3.268488] sdhci-esdhc 2150000.mmc: Adding to iommu group 9
[ 3.302025] mmc1: SDHCI controller on 2150000.mmc [2150000.mmc] using
ADMA
[ 3.310942] usbcore: registered new interface driver usbhid
[ 3.316639] usbhid: USB HID core driver
[ 3.321829] wm8904 2-001a: supply DCVDD not found, using dummy
regulator
[ 3.328964] wm8904 2-001a: supply DBVDD not found, using dummy
regulator
[ 3.336051] wm8904 2-001a: supply AVDD not found, using dummy
regulator
[ 3.343070] wm8904 2-001a: supply CPVDD not found, using dummy
regulator
[ 3.350290] wm8904 2-001a: supply MICVDD not found, using dummy
regulator
[ 3.360310] wm8904 2-001a: revision A
[ 3.373907] ------------[ cut here ]------------
[ 3.378655] sup:22c0000.dma-controller - con:f140000.audio-controller
f:192 s:2
[ 3.386461] WARNING: CPU: 0 PID: 1 at drivers/base/core.c:993
__device_links_no_driver+0xf0/0xf8
[ 3.395312] Modules linked in:
[ 3.398406] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
5.7.0-rc7-next-20200525-00001-ged5852b8c488-dirty #836
[ 3.409698] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC
Eval 2.0 carrier (DT)
[ 3.418027] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[ 3.419539] usb 3-1: new high-speed USB device number 2 using
xhci-hcd
[ 3.423644] pc : __device_links_no_driver+0xf0/0xf8
[ 3.423655] lr : __device_links_no_driver+0xf0/0xf8
[ 3.423666] sp : ffff80001118bbb0
[ 3.443376] x29: ffff80001118bbb0 x28: 0000000000000000
[ 3.448734] x27: 0000000000000006 x26: ffff800010cd04e8
[ 3.454090] x25: ffff800010d51960 x24: ffff00207a422c10
[ 3.459444] x23: 0000000000000001 x22: ffff800010bd4698
[ 3.464797] x21: ffff00207a422cb0 x20: ffff00207a401380
[ 3.470150] x19: ffff00207a422c90 x18: 0000000000000001
[ 3.475502] x17: 0000000000000000 x16: 0000000000000003
[ 3.480855] x15: ffffffffffffffff x14: ffff800010ff9948
[ 3.486208] x13: ffff8000112cbe08 x12: ffff8000112cbdfa
[ 3.491560] x11: 0720072007200720 x10: 00000000000009f0
[ 3.496914] x9 : ffff800010091f64 x8 : ffff00207ae50a50
[ 3.502266] x7 : 0000000000000000 x6 : 0000000000000001
[ 3.507618] x5 : 0000000000012890 x4 : 0000000000000000
[ 3.512970] x3 : ffff80206ea0e000 x2 : ffff80001101b6c8
[ 3.518322] x1 : 3ee0a21bc55cf800 x0 : 0000000000000000
[ 3.523676] Call trace:
[ 3.526148] __device_links_no_driver+0xf0/0xf8
[ 3.530715] device_links_no_driver+0x74/0x90
[ 3.535110] really_probe+0x1ac/0x318
[ 3.538805] driver_probe_device+0x40/0x90
[ 3.542936] device_driver_attach+0x7c/0x88
[ 3.547153] __driver_attach+0x60/0xe8
[ 3.550934] bus_for_each_dev+0x7c/0xd0
[ 3.554803] driver_attach+0x2c/0x38
[ 3.558409] bus_add_driver+0x194/0x1f8
[ 3.562278] driver_register+0x6c/0x128
[ 3.566151] __platform_driver_register+0x50/0x60
[ 3.570897] fsl_sai_driver_init+0x24/0x30
[ 3.575028] do_one_initcall+0x54/0x298
[ 3.578902] kernel_init_freeable+0x1ec/0x268
[ 3.583300] kernel_init+0x1c/0x118
[ 3.586819] ret_from_fork+0x10/0x1c
[ 3.590421] ---[ end trace e2cf5516fda822b1 ]---
[ 3.596351] ------------[ cut here ]------------
[ 3.601142] sup:22c0000.dma-controller - con:f150000.audio-controller
f:192 s:2
[ 3.608880] WARNING: CPU: 0 PID: 1 at drivers/base/core.c:993
__device_links_no_driver+0xf0/0xf8
[ 3.617729] Modules linked in:
[ 3.620818] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
5.7.0-rc7-next-20200525-00001-ged5852b8c488-dirty #836
[ 3.632109] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC
Eval 2.0 carrier (DT)
[ 3.640437] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[ 3.646052] pc : __device_links_no_driver+0xf0/0xf8
[ 3.650966] lr : __device_links_no_driver+0xf0/0xf8
[ 3.655876] sp : ffff80001118bbb0
[ 3.659214] x29: ffff80001118bbb0 x28: 0000000000000000
[ 3.664568] x27: 0000000000000006 x26: ffff800010cd04e8
[ 3.669921] x25: ffff800010d51960 x24: ffff00207a423010
[ 3.675273] x23: 0000000000000001 x22: ffff800010bd4698
[ 3.680625] x21: ffff00207a4230b0 x20: ffff00207a401400
[ 3.685977] x19: ffff00207a423090 x18: 0000000000000010
[ 3.691329] x17: 0000000000000000 x16: 0000000000000003
[ 3.696681] x15: ffffffffffffffff x14: 0720072007200720
[ 3.702034] x13: 0720072007200720 x12: 0720072007200720
[ 3.707388] x11: 0720072007200720 x10: 00000000000009f0
[ 3.712740] x9 : ffff800010091f64 x8 : ffff00207ae50a50
[ 3.718092] x7 : 00000000ffffffff x6 : 0000000000000001
[ 3.723445] x5 : 0000000000026318 x4 : 0000000000000000
[ 3.728797] x3 : ffff80206ea0e000 x2 : ffff80001101b6c8
[ 3.734148] x1 : 3ee0a21bc55cf800 x0 : 0000000000000000
[ 3.739501] Call trace:
[ 3.741971] __device_links_no_driver+0xf0/0xf8
[ 3.746536] device_links_no_driver+0x74/0x90
[ 3.750931] really_probe+0x1ac/0x318
[ 3.754624] driver_probe_device+0x40/0x90
[ 3.758755] device_driver_attach+0x7c/0x88
[ 3.762972] __driver_attach+0x60/0xe8
[ 3.766753] bus_for_each_dev+0x7c/0xd0
[ 3.770619] driver_attach+0x2c/0x38
[ 3.774225] bus_add_driver+0x194/0x1f8
[ 3.778094] driver_register+0x6c/0x128
[ 3.781966] __platform_driver_register+0x50/0x60
[ 3.786711] fsl_sai_driver_init+0x24/0x30
[ 3.790841] do_one_initcall+0x54/0x298
[ 3.794714] kernel_init_freeable+0x1ec/0x268
[ 3.799110] kernel_init+0x1c/0x118
[ 3.802630] ret_from_fork+0x10/0x1c
[ 3.806232] ---[ end trace e2cf5516fda822b2 ]---
[ 3.814231] NET: Registered protocol family 10
[ 3.820479] Segment Routing with IPv6
[ 3.824834] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.831872] NET: Registered protocol family 17
[ 3.836563] Bridge firewalling registered
[ 3.840986] 8021q: 802.1Q VLAN Support v1.8
[ 3.845354] Key type dns_resolver registered
[ 3.850170] registered taskstats version 1
[ 3.854411] Loading compiled-in X.509 certificates
[ 3.865482] fsl-edma 22c0000.dma-controller: Link attempted to
5000000.iommu 0x54
[ 3.870243] mmc1: new HS400 MMC card at address 0001
[ 3.873227] fsl-edma 22c0000.dma-controller: Link done to
5000000.iommu 0x44 2
[ 3.886624] fsl-edma 22c0000.dma-controller: Adding to iommu group 10
[ 3.893881] mmcblk1: mmc1:0001 S0J58X 29.6 GiB
[ 3.897220] pcieport 0001:00:00.0: Link attempted to 5000000.iommu
0x54
[ 3.899125] mmcblk1boot0: mmc1:0001 S0J58X partition 1 31.5 MiB
[ 3.906282] pcieport 0001:00:00.0: Link done to 5000000.iommu 0x54 2
[ 3.911856] mmcblk1boot1: mmc1:0001 S0J58X partition 2 31.5 MiB
[ 3.918769] pcieport 0001:00:00.0: Adding to iommu group 11
[ 3.923955] mmcblk1rpmb: mmc1:0001 S0J58X partition 3 4.00 MiB,
chardev (245:0)
[ 3.931177] pcieport 0001:00:00.0: AER: enabled with IRQ 24
[ 3.940995] mmcblk1: p1 p2
[ 3.944231] pcieport 0002:00:00.0: Link attempted to 5000000.iommu
0x54
[ 3.952783] pcieport 0002:00:00.0: Link done to 5000000.iommu 0x54 2
[ 3.960461] pcieport 0002:00:00.0: Adding to iommu group 12
[ 3.967139] mmc0: Tuning failed, falling back to fixed sampling clock
[ 3.973690] mmc0: tuning execution failed: -11
[ 3.978715] mmc0: error -11 whilst initialising SD card
[ 3.986303] pcieport 0002:00:00.0: AER: enabled with IRQ 26
[ 3.992238] hub 3-1:1.0: USB hub found
[ 3.996205] hub 3-1:1.0: 7 ports detected
[ 4.000757] fsl-qdma 8380000.dma-controller: Link attempted to
5000000.iommu 0x54
[ 4.008679] fsl-qdma 8380000.dma-controller: Link done to
5000000.iommu 0x44 2
[ 4.016152] fsl-qdma 8380000.dma-controller: Adding to iommu group 13
[ 4.022739] random: fast init done
[ 4.031806] asoc-simple-card sound: wm8904-hifi <->
f150000.audio-controller mapping ok
[ 4.042202] asoc-simple-card sound: wm8904-hifi <->
f140000.audio-controller mapping ok
[ 4.050453] asoc-simple-card sound: ASoC: no DMI vendor name!
[ 4.060914] irq: no irq domain found for sl28cpld@4a !
[ 4.066219] irq: no irq domain found for sl28cpld@4a !
[ 4.071577] gpio-keys buttons0: Found button without gpio or irq
[ 4.077719] gpio-keys: probe of buttons0 failed with error -22
[ 4.083992] ALSA device list:
[ 4.086990] #0: f150000.audio-controller-wm8904-hifi
[ 4.097062] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly
filesystem
[ 4.104524] EXT4-fs (mmcblk1p2): write access will be enabled during
recovery
[ 4.129244] EXT4-fs (mmcblk1p2): recovery complete
[ 4.136609] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 4.145056] VFS: Mounted root (ext4 filesystem) readonly on device
179:2.
[ 4.152637] devtmpfs: mounted
[ 4.165237] mmc0: new ultra high speed SDR104 SDHC card at address
1234
[ 4.167777] Freeing unused kernel memory: 3200K
[ 4.176808] Run /sbin/init as init process
[ 4.180973] with arguments:
[ 4.181560] mmcblk0: mmc0:1234 SA16G 14.4 GiB
[ 4.183988] /sbin/init
[ 4.183994] with environment:
[ 4.184003] HOME=/
[ 4.197079] TERM=linux
[ 4.197109] mmcblk0: p1
[ 4.250330] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
[ 4.343586] usb 3-1.6: new full-speed USB device number 3 using
xhci-hcd
[ 4.426118] udevd[128]: starting version 3.2.8
[ 4.432917] random: udevd: uninitialized urandom read (16 bytes read)
[ 4.440809] random: udevd: uninitialized urandom read (16 bytes read)
[ 4.447516] random: udevd: uninitialized urandom read (16 bytes read)
[ 4.459626] udevd[128]: specified group 'kvm' unknown
[ 4.487594] udevd[129]: starting eudev-3.2.8
[ 6.745883] fsl_enetc 0000:00:00.0 gbe0: renamed from eth0
[ 9.579015] urandom_read: 3 callbacks suppressed
[ 9.579028] random: dd: uninitialized urandom read (512 bytes read)
[ 9.740749] Qualcomm Atheros AR8031/AR8033 0000:00:00.0:05: attached
PHY driver [Qualcomm Atheros AR8031/AR8033]
(mii_bus:phy_addr=0000:00:00.0:05, irq=POLL)
[ 9.773881] fsl_enetc 0000:00:00.0 gbe0: Link is Down
[ 9.833227] random: dropbear: uninitialized urandom read (32 bytes
read)
[ 11.812081] fsl_enetc 0000:00:00.0 gbe0: Link is Up - 10Mbps/Full -
flow control off
[ 11.819966] IPv6: ADDRCONF(NETDEV_CHANGE): gbe0: link becomes ready
[ 12.835873] fsl_enetc 0000:00:00.0 gbe0: Link is Down
[ 14.884068] fsl_enetc 0000:00:00.0 gbe0: Link is Up - 1Gbps/Full -
flow control off


-michael

\
 
 \ /
  Last update: 2020-05-26 23:13    [W:0.951 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site