lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 008/111] mtd: spinand: Propagate ECC information to the MTD structure
Date
From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit 3507273d5a4d3c2e46f9d3f9ed9449805f5dff07 ]

This is done by default in the raw NAND core (nand_base.c) but was
missing in the SPI-NAND core. Without these two lines the ecc_strength
and ecc_step_size values are not exported to the user through sysfs.

Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/spi/core.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 8dda51bbdd11..0d21c68bfe24 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -1049,6 +1049,10 @@ static int spinand_init(struct spinand_device *spinand)

mtd->oobavail = ret;

+ /* Propagate ECC information to mtd_info */
+ mtd->ecc_strength = nand->eccreq.strength;
+ mtd->ecc_step_size = nand->eccreq.step_size;
+
return 0;

err_cleanup_nanddev:
--
2.25.1


\
 
 \ /
  Last update: 2020-05-26 21:25    [W:0.525 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site