lkml.org 
[lkml]   [2020]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 69/81] misc: rtsx: Add short delay after exit from ASPM
Date
From: Klaus Doth <kdlnx@doth.eu>

commit 7a839dbab1be59f5ed3b3b046de29e166784c9b4 upstream.

DMA transfers to and from the SD card stall for 10 seconds and run into
timeout on RTS5260 card readers after ASPM was enabled.

Adding a short msleep after disabling ASPM fixes the issue on several
Dell Precision 7530/7540 systems I tested.

This function is only called when waking up after the chip went into
power-save after not transferring data for a few seconds. The added
msleep does therefore not change anything in data transfer speed or
induce any excessive waiting while data transfers are running, or the
chip is sleeping. Only the transition from sleep to active is affected.

Signed-off-by: Klaus Doth <kdlnx@doth.eu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4434eaa7-2ee3-a560-faee-6cee63ebd6d4@doth.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/misc/cardreader/rtsx_pcr.c | 3 +++
1 file changed, 3 insertions(+)

--- a/drivers/misc/cardreader/rtsx_pcr.c
+++ b/drivers/misc/cardreader/rtsx_pcr.c
@@ -155,6 +155,9 @@ static void rtsx_comm_pm_full_on(struct

rtsx_disable_aspm(pcr);

+ /* Fixes DMA transfer timout issue after disabling ASPM on RTS5260 */
+ msleep(1);
+
if (option->ltr_enabled)
rtsx_set_ltr_latency(pcr, option->ltr_active_latency);


\
 
 \ /
  Last update: 2020-05-26 21:05    [W:0.330 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site