lkml.org 
[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [EXT] Re: [PATCH] arm64: dts: ls1028a: add one more thermal zone support
Date


-----Original Message-----
From: Daniel Lezcano <daniel.lezcano@linaro.org>
Sent: 2020年5月25日 19:08
To: Andy Tang <andy.tang@nxp.com>; shawnguo@kernel.org; robh+dt@kernel.org; mark.rutland@arm.com; catalin.marinas@arm.com; will.deacon@arm.com
Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
Subject: [EXT] Re: [PATCH] arm64: dts: ls1028a: add one more thermal zone support

Caution: EXT Email

On 25/05/2020 09:38, Yuantian Tang wrote:
> There are 2 thermal zones in ls1028a soc. Current dts only includes
> one. This patch adds the other thermal zone node in dts to enable it.

For my personal information, is there a cooling device for the DDR?

A: There is only one cooling device which is used by core-cluster sensor zone.
So there is no cooling device for DDR.

BR,
Andy

> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> ---
> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 22
> ++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 055f114cf848..bc6f0c0f85da 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -129,11 +129,31 @@
> };
>
> thermal-zones {
> - core-cluster {
> + ddr-controller {
> polling-delay-passive = <1000>;
> polling-delay = <5000>;
> thermal-sensors = <&tmu 0>;
>
> + trips {
> + ddr-ctrler-alert {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + ddr-ctrler-crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + core-cluster {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&tmu 1>;
> +
> trips {
> core_cluster_alert: core-cluster-alert {
> temperature = <85000>;
>


--
<https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.linaro.org%2F&amp;data=02%7C01%7Candy.tang%40nxp.com%7Cfb12ed47db3c4912bf1b08d8009be7d0%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637260016892509132&amp;sdata=WUnbHs3O1yLfoRZ2usPXAu7EGBoSL7vypnmrhTGHaGI%3D&amp;reserved=0> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.facebook.com%2Fpages%2FLinaro&amp;data=02%7C01%7Candy.tang%40nxp.com%7Cfb12ed47db3c4912bf1b08d8009be7d0%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637260016892509132&amp;sdata=W4k8Vs3wVVvfeGN4xVxKgBl3mG2j%2FjMJj07NEAqpAck%3D&amp;reserved=0> Facebook | <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ftwitter.com%2F%23!%2Flinaroorg&amp;data=02%7C01%7Candy.tang%40nxp.com%7Cfb12ed47db3c4912bf1b08d8009be7d0%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637260016892509132&amp;sdata=OeFLPA0lZHuvGkm1OuT38PxAUpLMsr7fBXEBkEGWXc8%3D&amp;reserved=0> Twitter | <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.linaro.org%2Flinaro-blog%2F&amp;data=02%7C01%7Candy.tang%40nxp.com%7Cfb12ed47db3c4912bf1b08d8009be7d0%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637260016892509132&amp;sdata=aYR%2FaUzcFxsMDG9QaH0Ge7AKg0kJniSOSPE6fXoJpzw%3D&amp;reserved=0> Blog
\
 
 \ /
  Last update: 2020-05-26 04:46    [W:9.015 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site