lkml.org 
[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] ARM: dts: r8a7742-iwg21d-q7: Enable SDHI2 controller
Date
Enable the SDHI2 controller on iWave RZ/G1H carrier board.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
---
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 47 +++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index e154e3a..bb1deb0 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -21,6 +21,28 @@
bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait";
stdout-path = "serial2:115200n8";
};
+
+ vcc_sdhi2: regulator-vcc-sdhi2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ };
+
+ vccq_sdhi2: regulator-vccq-sdhi2 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI2 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
};

&pfc {
@@ -33,6 +55,18 @@
groups = "scifb2_data", "scifb2_ctrl";
function = "scifb2";
};
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
};

&scifa2 {
@@ -49,3 +83,16 @@
uart-has-rtscts;
status = "okay";
};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi2>;
+ vqmmc-supply = <&vccq_sdhi2>;
+ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
--
2.7.4
\
 
 \ /
  Last update: 2020-05-25 17:23    [W:1.817 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site