lkml.org 
[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] sctp: check assoc before SCTP_ADDR_{MADE_PRIM,ADDED} event
On Mon, May 25, 2020 at 04:42:16PM +0800, Xin Long wrote:
> On Sat, May 23, 2020 at 8:04 PM Jonas Falkevik <jonas.falkevik@gmail.com> wrote:
> >
> > On Tue, May 19, 2020 at 10:42 PM Marcelo Ricardo Leitner
> > <marcelo.leitner@gmail.com> wrote:
> > >
> > > On Fri, May 15, 2020 at 10:30:29AM +0200, Jonas Falkevik wrote:
> > > > On Wed, May 13, 2020 at 11:32 PM Marcelo Ricardo Leitner
> > > > <marcelo.leitner@gmail.com> wrote:
> > > > >
> > > > > On Wed, May 13, 2020 at 10:11:05PM +0200, Jonas Falkevik wrote:
> > > > > > On Wed, May 13, 2020 at 6:01 PM Marcelo Ricardo Leitner
> > > > > > <marcelo.leitner@gmail.com> wrote:
> > > > > > >
> > > > > > > On Wed, May 13, 2020 at 04:52:16PM +0200, Jonas Falkevik wrote:
> > > > > > > > Do not generate SCTP_ADDR_{MADE_PRIM,ADDED} events for SCTP_FUTURE_ASSOC assocs.
> > > > > > >
> > > > > > > How did you get them?
> > > > > > >
> > > > > >
> > > > > > I think one case is when receiving INIT chunk in sctp_sf_do_5_1B_init().
> > > > > > Here a closed association is created, sctp_make_temp_assoc().
> > > > > > Which is later used when calling sctp_process_init().
> > > > > > In sctp_process_init() one of the first things are to call
> > > > > > sctp_assoc_add_peer()
> > > > > > on the closed / temp assoc.
> > > > > >
> > > > > > sctp_assoc_add_peer() are generating the SCTP_ADDR_ADDED event on the socket
> > > > > > for the potentially new association.
> > > > >
> > > > > I see, thanks. The SCTP_FUTURE_ASSOC means something different. It is
> > > > > for setting/getting socket options that will be used for new asocs. In
> > > > > this case, it is just a coincidence that asoc_id is not set (but
> > > > > initialized to 0) and SCTP_FUTURE_ASSOC is also 0.
> > > >
> > > > yes, you are right, I overlooked that.
> > > >
> > > > > Moreso, if I didn't
> > > > > miss anything, it would block valid events, such as those from
> > > > > sctp_sf_do_5_1D_ce
> > > > > sctp_process_init
> > > > > because sctp_process_init will only call sctp_assoc_set_id() by its
> > > > > end.
> > > >
> > > > Do we want these events at this stage?
> > > > Since the association is a newly established one, have the peer address changed?
> > > > Should we enqueue these messages with sm commands instead?
> > > > And drop them if we don't have state SCTP_STATE_ESTABLISHED?
> > > >
> > > > >
> > > > > I can't see a good reason for generating any event on temp assocs. So
> > > > > I'm thinking the checks on this patch should be on whether the asoc is
> > > > > a temporary one instead. WDYT?
> > > > >
> > > >
> > > > Agree, we shouldn't rely on coincidence.
> > > > Either check temp instead or the above mentioned state?
> > > >
> > > > > Then, considering the socket is locked, both code points should be
> > > > > allocating the IDR earlier. It's expensive, yes (point being, it could
> > > > > be avoided in case of other failures), but it should be generating
> > > > > events with the right assoc id. Are you interested in pursuing this
> > > > > fix as well?
> > > >
> > > > Sure.
> > > >
> > > > If we check temp status instead, we would need to allocate IDR earlier,
> > > > as you mention. So that we send the notification with correct assoc id.
> > > >
> > > > But shouldn't the SCTP_COMM_UP, for a newly established association, be the
> > > > first notification event sent?
> > > > The SCTP_COMM_UP notification is enqueued later in sctp_sf_do_5_1D_ce().
> > >
> > > The RFC doesn't mention any specific ordering for them, but it would
> > > make sense. Reading the FreeBSD code now (which I consider a reference
> > > implementation), it doesn't raise these notifications from
> > > INIT_ACK/COOKIE_ECHO at all. The only trigger for SCTP_ADDR_ADDED
> > > event is ASCONF ADD command itself. So these are extra in Linux, and
> > > I'm afraid we got to stick with them.
> > >
> > > Considering the error handling it already has, looks like the
> > > reordering is feasible and welcomed. I'm thinking the temp check and
> > > reordering is the best way forward here.
> > >
> > > Thoughts? Neil? Xin? The assoc_id change might be considered an UAPI
> > > breakage.
> >
> > Some order is mentioned in RFC 6458 Chapter 6.1.1.
> >
> > SCTP_COMM_UP: A new association is now ready, and data may be
> > exchanged with this peer. When an association has been
> > established successfully, this notification should be the
> > first one.

Oh, nice finding.

> If this is true, as SCTP_COMM_UP event is always followed by state changed
> to ESTABLISHED. So I'm thinking to NOT make addr events by checking the
> state:
>
> @@ -343,6 +343,9 @@ void sctp_ulpevent_nofity_peer_addr_change(struct
> sctp_transport *transport,
> struct sockaddr_storage addr;
> struct sctp_ulpevent *event;
>
> + if (asoc->state < SCTP_STATE_ESTABLISHED)
> + return;
> +
> memset(&addr, 0, sizeof(struct sockaddr_storage));
> memcpy(&addr, &transport->ipaddr, transport->af_specific->sockaddr_len);

With the above said, yep. Thanks.

>
> It's not easy to completely do assoc_id change/event reordering/temp check.
> As:

Temp check should be fine, but agree re the others. Anyhow, the above
will be good already. :-)

>
> 1. sctp_assoc_add_peer() is called in quite a few places where assoc_id is
> not set.
> 2. it's almost impossible to move SCTP_ADDR_ADDED from sctp_assoc_add_peer()
> after SCTP_COMM_UP.
>
> >
> > I can make a patch with a check on temp and make COMM_UP event first.
> > Currently the COMM_UP event is enqueued via commands
> > while the SCTP_ADDR_ADDED event is enqueued directly.
> >
> > sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev));
> > vs.
> > asoc->stream.si->enqueue_event(&asoc->ulpq, event);
> >
> > Do you want me to change to use commands instead of enqueing?
> > Or should we enqueue the COMM_UP event directly?
> >
> > -Jonas

\
 
 \ /
  Last update: 2020-05-25 15:11    [W:0.054 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site