lkml.org 
[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 3/8] spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
On Sat, May 23, 2020 at 09:35:06AM +0800, dillon min wrote:

> - if (ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX)) {
> + if ((ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX)) &&
> + !(msg->spi->mode & SPI_3WIRE)) {
> max_tx = 0;
> max_rx = 0;

> for my board, lcd panel ilitek ill9341 use 3wire mode, gyro l3gd20 use
> simplex rx mode.
> it's has benefits to l3gd20, no impact to ili9341.

> if it's fine to spi-core, i will include it to my next submits.

Yes, looks reasonable.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-05-25 13:44    [W:0.046 / U:22.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site