lkml.org 
[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/6] arm64: dts: qcom: sm8250: add apps_smmu node
Hi,

On 2020-05-25 16:38, Jonathan Marek wrote:
> On 5/25/20 6:54 AM, Sai Prakash Ranjan wrote:
>> On 2020-05-25 15:39, Jonathan Marek wrote:
>>> Hi,
>>>
>>> On 5/25/20 5:42 AM, Sai Prakash Ranjan wrote:
>>>> Hi Jonathan,
>>>>
>>>> On 2020-05-24 08:08, Jonathan Marek wrote:
>>>>> Add the apps_smmu node for sm8250. Note that adding the iommus
>>>>> field for
>>>>> UFS is required because initializing the iommu removes the bypass
>>>>> mapping
>>>>> that created by the bootloader.
>>>>>
>>>>
>>>> This statement doesn't seem right, you can just say since the bypass
>>>> is disabled
>>>> by default now, we need to add this property to enable translation
>>>> and avoid global faults.
>>>>
>>>
>>> If I use this patch [1] then the UFS iommu property isn't needed. In
>>> downstream, the identity (bypass?) stream mapping is inherited from
>>> the bootloader, and UFS is used without any iommu property. Setting
>>> ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=n doesn't make it work on its own
>>> (without the UFS iommu property), so there's more to it than just
>>> "bypass is disabled by default now".
>>>
>>> https://patchwork.kernel.org/patch/11310757/
>>>
>>
>> "iommus" property is not about inheriting stream mapping from
>> bootloader,
>> it is used to enable SMMU address translation for the corresponding
>> master when specified. So when you have disabled bypass, i.e.,
>> ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y or via cmdline
>> "arm-smmu.disable_bypass=1"
>> and iommus property with SID and mask is not specified, then it will
>> result
>> in SMMU global faults.
>>
>> Downstream has bypass enabled(ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=n),so
>> you
>> won't see any global faults if you do not have iommus property.
>>
>> Patch in your link is for display because of the usecase for splash
>> screen
>> on android and some other devices where the bootloader will configure
>> SMMU,
>> it has not yet merged and not likely to get merged in the current
>> state.
>>
>> So yes "there is *not* much more to it than bypass is disabled by
>> default now"
>> and you have to specify "iommus" for the master devices or you should
>> enable bypass,
>> i.e., ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=n or
>> arm-smmu.disable_bypass=n
>>
>> Try without the patch in the link and without iommus for UFS and
>> ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y and you will see.
>>
>> -Sai
>
> I know that the "iommus" property is not about inheriting stream
> mapping. Probing the iommu removes the stream mapping created by the
> bootloader, the iommus property is added so that new mappings are
> created to replace what was removed.
>
> You seem to be under the impression that the SM8150/SM8250 bootloader
> does not configure SMMU. It does, for both UFS and SDHC, just like it
> does for display/splash screen on some devices.
>

It could be that bootloader does configure SMMU for UFS and SDHC, but
the
upstream SMMU driver doesnt allow to inherit stream mapping from the
bootloader
yet, so adding iommus property based on the assumption that it is
inherited seems
wrong.

> With either value of ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT, it will not
> work without the iommus property.

I'm pretty sure that if you have ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=n
and
without iommus, it should work.

-Sai

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
member
of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2020-05-25 13:18    [W:0.133 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site