lkml.org 
[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH 07/14] iio: core: add simple centralized mechanism for ioctl() handlers
Date
On Sun, 2020-05-24 at 17:45 +0100, Jonathan Cameron wrote:
> [External]
>
> On Fri, 8 May 2020 16:53:41 +0300
> Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
>
> > The aim of this is to reduce the organization violation of ioctl() calls in
> > IIO core. Currently, since the chardev is split across files, event ioctl()
> > calls need to be called in buffer ioctl() calls.
> >
> > The 'industrialio-core.c' file will provide a 'iio_device_ioctl()' which
> > will iterate over a list of ioctls registered with the IIO device. These
> > can be event ioctl() or buffer ioctl() calls, or something else.
> > This is needed, since there is currently one chardev per IIO device and
> > that is used for both event handling and reading from the buffer.
> >
> > Each ioctl() will have to return a IIO_IOCTL_UNHANDLED code (which is
> > positive 1), if the ioctl() did not handle the call in any. This eliminates
> > any potential ambiguities; if we were to have used error codes it would
> > have been uncertain whether they were actual errors, or whether
> > the registered ioctl() doesn't service the command.
> >
> > If any ioctl() returns 0, it was considered that it was serviced
> > successfully and the loop will exit.
> >
> > One assumption for all registered ioctl() handlers is that they are
> > statically allocated, so the iio_device_unregister() which just remove all
> > of them from the device's ioctl() handler list.
> >
> > Also, something that is a bit hard to do [at this point] and may not be
> > worth the effort of doing, is to check whether registered ioctl()
> > calls/commands overlap. This should be unlikely to happen, and should get
> > caught at review time. Though, new ioctl() calls would likely not be added
> > too often.
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
>
> We seem to have dropped the locking in here. What am I missing that
> stops us racing a remove with the ioctl? If there is a reason that
> can't race, please add comments there so I don't wonders sometime in
> the future.
>

Yeah.
My bad about the locking.
I have too many branches for this stuff.
But for the chardev split, there's a branch that should have the locking in
place.
I'll re-check that, when sending only the chardev split anyway.


> The check on iio_dev->info means we won't start the ioctl if the
> remove has been called, but if we switch immediately after that,
> anything can happen before we start calling the ioctls.
>
> J
>
> > ---
> > drivers/iio/iio_core.h | 14 ++++++++++++++
> > drivers/iio/industrialio-core.c | 33 +++++++++++++++++++++++++++++++++
> > include/linux/iio/iio.h | 2 ++
> > 3 files changed, 49 insertions(+)
> >
> > diff --git a/drivers/iio/iio_core.h b/drivers/iio/iio_core.h
> > index a527a66be9e5..34c3e19229d8 100644
> > --- a/drivers/iio/iio_core.h
> > +++ b/drivers/iio/iio_core.h
> > @@ -17,6 +17,20 @@ struct iio_dev;
> >
> > extern struct device_type iio_device_type;
> >
> > +#define IIO_IOCTL_UNHANDLED 1
> > +struct iio_ioctl_handler {
> > + struct list_head entry;
> > + long (*ioctl)(struct iio_dev *indio_dev, struct file *filp,
> > + unsigned int cmd, unsigned long arg);
> > +};
> > +
> > +long iio_device_ioctl(struct iio_dev *indio_dev, struct file *filp,
> > + unsigned int cmd, unsigned long arg);
> > +
> > +void iio_device_ioctl_handler_register(struct iio_dev *indio_dev,
> > + struct iio_ioctl_handler *h);
> > +void iio_device_ioctl_handler_unregister(struct iio_ioctl_handler *h);
> > +
> > int __iio_add_chan_devattr(const char *postfix,
> > struct iio_chan_spec const *chan,
> > ssize_t (*func)(struct device *dev,
> > diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-
> > core.c
> > index 32e045c7f0c1..5df3af5e7dcb 100644
> > --- a/drivers/iio/industrialio-core.c
> > +++ b/drivers/iio/industrialio-core.c
> > @@ -1534,6 +1534,7 @@ struct iio_dev *iio_device_alloc(int sizeof_priv)
> > }
> > dev_set_name(&dev->dev, "iio:device%d", dev->id);
> > INIT_LIST_HEAD(&dev->buffer_list);
> > + INIT_LIST_HEAD(&dev->ioctl_handlers);
> >
> > return dev;
> > }
> > @@ -1587,6 +1588,33 @@ struct iio_dev *devm_iio_device_alloc(struct device
> > *dev, int sizeof_priv)
> > }
> > EXPORT_SYMBOL_GPL(devm_iio_device_alloc);
> >
> > +void iio_device_ioctl_handler_register(struct iio_dev *indio_dev,
> > + struct iio_ioctl_handler *h)
> > +{
> > + /* this assumes that all ioctl() handlers are statically allocated */
> > + list_add_tail(&h->entry, &indio_dev->ioctl_handlers);
> > +}
> > +
> > +long iio_device_ioctl(struct iio_dev *indio_dev, struct file *filp,
> > + unsigned int cmd, unsigned long arg)
> > +{
> > + struct iio_ioctl_handler *h;
> > + int ret;
> > +
> > + if (!indio_dev->info)
> > + return -ENODEV;
>
> The locking is gone?
> > +
> > + list_for_each_entry(h, &indio_dev->ioctl_handlers, entry) {
> > + ret = h->ioctl(indio_dev, filp, cmd, arg);
> > + if (ret == 0)
> > + return 0;
> > + if (ret != IIO_IOCTL_UNHANDLED)
> > + return ret;
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > static int iio_check_unique_scan_index(struct iio_dev *indio_dev)
> > {
> > int i, j;
> > @@ -1722,6 +1750,8 @@ EXPORT_SYMBOL(__iio_device_register);
> > **/
> > void iio_device_unregister(struct iio_dev *indio_dev)
> > {
> > + struct iio_ioctl_handler *h, *t;
> > +
> > cdev_device_del(indio_dev->chrdev, &indio_dev->dev);
> > iio_device_free_chrdev_id(&indio_dev->dev);
> >
> > @@ -1731,6 +1761,9 @@ void iio_device_unregister(struct iio_dev *indio_dev)
> >
> > iio_disable_all_buffers(indio_dev);
> >
> > + list_for_each_entry_safe(h, t, &indio_dev->ioctl_handlers, entry)
> > + list_del(&h->entry);
> > +
> > indio_dev->info = NULL;
> >
> > iio_device_wakeup_eventset(indio_dev);
> > diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
> > index 52992be44e9e..b6ca8d85629e 100644
> > --- a/include/linux/iio/iio.h
> > +++ b/include/linux/iio/iio.h
> > @@ -488,6 +488,7 @@ struct iio_buffer_setup_ops {
> > * @currentmode: [DRIVER] current operating mode
> > * @dev: [DRIVER] device structure, should be assigned a parent
> > * and owner
> > + * @ioctl_handlers: [INTERN] list of registered ioctl handlers
> > * @event_interface: [INTERN] event chrdevs associated with interrupt
> > lines
> > * @buffer: [DRIVER] any buffer present
> > * @buffer_list: [INTERN] list of all buffers currently attached
> > @@ -529,6 +530,7 @@ struct iio_dev {
> > int modes;
> > int currentmode;
> > struct device dev;
> > + struct list_head ioctl_handlers;
> >
> > struct iio_event_interface *event_interface;
> >
\
 
 \ /
  Last update: 2020-05-25 09:25    [W:0.072 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site