lkml.org 
[lkml]   [2020]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
Date
AM654 SoC requires USB3.0 PHY to be turned on before the USB controller.
For this SoC, the 'phys' property is used to provide the USB3.0
reference.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
.../devicetree/bindings/usb/ti,keystone-dwc3.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
index 14d2fe329b93..f127535feb0b 100644
--- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
@@ -34,6 +34,16 @@ properties:
value. This property is as per the binding,
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt

+ phys:
+ description:
+ PHY specifier for the USB3.0 PHY. Some SoCs need the USB3.0 PHY
+ to be turned on before the controller.
+ Documentation/devicetree/bindings/phy/phy-bindings.txt
+
+ phy-names:
+ items:
+ - const: "usb3-phy"
+
dwc3:
description: This is the node representing the DWC3 controller instance
Documentation/devicetree/bindings/usb/dwc3.txt
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
\
 
 \ /
  Last update: 2020-05-25 09:11    [W:0.035 / U:1.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site