lkml.org 
[lkml]   [2020]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] pwm: jz4740: Add support for the JZ4725B
Hi Uwe,

Le dim. 24 mai 2020 à 19:37, Uwe Kleine-König
<u.kleine-koenig@pengutronix.de> a écrit :
> On Mon, Apr 13, 2020 at 02:14:45PM +0200, Paul Cercueil wrote:
>> The PWM hardware in the JZ4725B works the same as in the JZ4740,
>> but has
>> only six channels available.
>>
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>>
>> Notes:
>> I did not add documentation for the new jz4725b-pwm compatible
>> string on purpose. The reason is that the documentation file
>> for the Timer/Counter Unit (TCU) of Ingenic SoCs will be
>> completely rewritten from .txt to YAML in a separate patchset.
>>
>> drivers/pwm/pwm-jz4740.c | 20 +++++++++++++++++---
>> 1 file changed, 17 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
>> index f566f9d248d6..bb27934fb6c2 100644
>> --- a/drivers/pwm/pwm-jz4740.c
>> +++ b/drivers/pwm/pwm-jz4740.c
>> @@ -22,6 +22,10 @@
>>
>> #define NUM_PWM 8
>>
>> +struct soc_info {
>> + unsigned int num_pwms;
>> +};
>> +
>> struct jz4740_pwm_chip {
>> struct pwm_chip chip;
>> struct regmap *map;
>> @@ -36,7 +40,7 @@ static bool jz4740_pwm_can_use_chn(struct
>> jz4740_pwm_chip *jz,
>> unsigned int channel)
>> {
>> /* Enable all TCU channels for PWM use by default except channels
>> 0/1 */
>> - u32 pwm_channels_mask = GENMASK(NUM_PWM - 1, 2);
>> + u32 pwm_channels_mask = GENMASK(jz->chip.npwm - 1, 2);
>>
>> device_property_read_u32(jz->chip.dev->parent,
>> "ingenic,pwm-channels-mask",
>> @@ -214,6 +218,7 @@ static int jz4740_pwm_probe(struct
>> platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> struct jz4740_pwm_chip *jz4740;
>> + const struct soc_info *info = device_get_match_data(dev);
>>
>> jz4740 = devm_kzalloc(dev, sizeof(*jz4740), GFP_KERNEL);
>> if (!jz4740)
>> @@ -227,8 +232,8 @@ static int jz4740_pwm_probe(struct
>> platform_device *pdev)
>>
>> jz4740->chip.dev = dev;
>> jz4740->chip.ops = &jz4740_pwm_ops;
>> - jz4740->chip.npwm = NUM_PWM;
>> jz4740->chip.base = -1;
>> + jz4740->chip.npwm = info ? info->num_pwms : NUM_PWM;
>
> Can info be actually NULL? I don't think so, so you can just use
> info->num_pwms here and drop the definition of NUM_PWM.

In *theory* it can be NULL if the kernel is configured without
CONFIG_OF, which will never happen on any board supported by this
driver. I can add a dependency on CONFIG_OF in V2, then use
info->num_pwms there.

cheers,
-Paul

>> jz4740->chip.of_xlate = of_pwm_xlate_with_flags;
>> jz4740->chip.of_pwm_n_cells = 3;
>>
>
> Best regards
> Uwe
>
> --
> Pengutronix e.K. | Uwe Kleine-König
> |
> Industrial Linux Solutions |
> https://www.pengutronix.de/ |


\
 
 \ /
  Last update: 2020-05-24 19:52    [W:0.053 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site