lkml.org 
[lkml]   [2020]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dmaengine: stm32-dmamux: Fix runtime PM imbalance on error
Date
In stm32_dmamux_route_allocate(),  pm_runtime_get_sync() increments
the runtime PM usage counter even when it returns an error code.
Thus a pairing decrement is needed on the error handling path to
keep the counter balanced.

In stm32_dmamux_probe(), when platform_get_resource() returns an
error code, a pairing runtime PM usage counter decrement is needed
to keep the counter balanced. For error paths after this call,
things are the same.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
---
drivers/dma/stm32-dmamux.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
index 12f7637e13a1..e68e7078ff94 100644
--- a/drivers/dma/stm32-dmamux.c
+++ b/drivers/dma/stm32-dmamux.c
@@ -139,6 +139,7 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
spin_lock_irqsave(&dmamux->lock, flags);
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0) {
+ pm_runtime_put_noidle(&pdev->dev);
spin_unlock_irqrestore(&dmamux->lock, flags);
goto error;
}
@@ -246,8 +247,10 @@ static int stm32_dmamux_probe(struct platform_device *pdev)

res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
iomem = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(iomem))
+ if (IS_ERR(iomem)) {
+ pm_runtime_put_noidle(&pdev->dev);
return PTR_ERR(iomem);
+ }

spin_lock_init(&stm32_dmamux->lock);

@@ -256,12 +259,14 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
ret = PTR_ERR(stm32_dmamux->clk);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev, "Missing clock controller\n");
+ pm_runtime_put_noidle(&pdev->dev);
return ret;
}

ret = clk_prepare_enable(stm32_dmamux->clk);
if (ret < 0) {
dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
+ pm_runtime_put_noidle(&pdev->dev);
return ret;
}

@@ -300,6 +305,7 @@ static int stm32_dmamux_probe(struct platform_device *pdev)
return 0;

err_clk:
+ pm_runtime_put_noidle(&pdev->dev);
clk_disable_unprepare(stm32_dmamux->clk);

return ret;
--
2.17.1
\
 
 \ /
  Last update: 2020-05-24 08:03    [W:0.048 / U:2.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site