lkml.org 
[lkml]   [2020]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 5/5] dt-bindings: timer: Add CLINT bindings
On Fri, May 22, 2020 at 1:35 AM Sean Anderson <seanga2@gmail.com> wrote:
>
> On 5/21/20 9:45 AM, Anup Patel wrote:
> > We add DT bindings documentation for CLINT device.
> >
> > Signed-off-by: Anup Patel <anup.patel@wdc.com>
> > ---
> > .../bindings/timer/sifive,clint.txt | 33 +++++++++++++++++++
> > 1 file changed, 33 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/timer/sifive,clint.txt
> >
> > diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.txt b/Documentation/devicetree/bindings/timer/sifive,clint.txt
> > new file mode 100644
> > index 000000000000..cae2dad1223a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/timer/sifive,clint.txt
> > @@ -0,0 +1,33 @@
> > +SiFive Core Local Interruptor (CLINT)
> > +-------------------------------------
> > +
> > +SiFive (and other RISC-V) SOCs include an implementation of the SiFive Core
> > +Local Interruptor (CLINT) for M-mode timer and inter-processor interrupts.
> > +
> > +It directly connects to the timer and inter-processor interrupt lines of
> > +various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local interrupt
> > +controller is the parent interrupt controller for CLINT device.
> > +
> > +The clock frequency of CLINT is specified via "timebase-frequency" DT
> > +property of "/cpus" DT node. The "timebase-frequency" DT property is
> > +described in: Documentation/devicetree/bindings/riscv/cpus.yaml
> > +
> > +Required properties:
> > +- compatible : "sifive,clint-1.0.0" and a string identifying the actual
> > + detailed implementation in case that specific bugs need to be worked around.
>
> Should the "riscv,clint0" compatible string be documented here? This

Yes, I forgot to add this compatible string. I will add in v2.

> peripheral is not really specific to sifive, as it is present in most
> rocket-chip cores.

I agree that CLINT is present in a lot of non-SiFive RISC-V SOCs and
FPGAs but this IP is only documented as part of SiFive FU540 SOC.
(Refer, https://static.dev.sifive.com/FU540-C000-v1.0.pdf)

The RISC-V foundation should host the CLINT spec independently
under https://github.com/riscv and make CLINT spec totally open.

For now, I have documented it just like PLIC DT bindings found at:
Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt

If RISC-V maintainers agree then I will document it as "RISC-V CLINT".

@Palmer ?? @Paul ??

>
> > +- reg : Should contain 1 register range (address and length).
> > +- interrupts-extended : Specifies which HARTs (or CPUs) are connected to
> > + the CLINT. Each node pointed to should be a riscv,cpu-intc node, which
> > + has a riscv node as parent.
> > +
> > +Example:
> > +
> > + clint@2000000 {
> > + compatible = "sifive,clint-1.0.0", "sifive,fu540-c000-clint";
> > + interrupts-extended = <
> > + &cpu1-intc 3 &cpu1-intc 7
> > + &cpu2-intc 3 &cpu2-intc 7
> > + &cpu3-intc 3 &cpu3-intc 7
> > + &cpu4-intc 3 &cpu4-intc 7>;
> > + reg = <0x2000000 0x4000000>;
> > + };
> >
>
> --Sean

Regards,
Anup

\
 
 \ /
  Last update: 2020-05-22 07:54    [W:0.115 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site