lkml.org 
[lkml]   [2020]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch 1/2] dt-binbings: media: ti-vpe: Document the VIP driver
Date
Device Tree bindings for the Video Input Port (VIP) driver.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
.../devicetree/bindings/media/ti,vip.yaml | 394 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 395 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/ti,vip.yaml

diff --git a/Documentation/devicetree/bindings/media/ti,vip.yaml b/Documentation/devicetree/bindings/media/ti,vip.yaml
new file mode 100644
index 000000000000..8a9084e42329
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,vip.yaml
@@ -0,0 +1,394 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,vip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DRA7x VIDEO INPUT PORT (VIP) Device Tree Bindings
+
+maintainers:
+ - Benoit Parrot <bparrot@ti.com>
+
+description: |-
+ The Video Input Port (VIP) is a key component for image capture
+ applications. The capture module provides the system interface and the
+ processing capability to connect parallel image-sensor as well as
+ BT.656/1120 capable encoder chip to DRA7x device.
+
+ Each VIP instance supports 2 independently configurable external video
+ input capture slices (Slice 0 and Slice 1) each providing up to two video
+ input ports (Port A and Port B) where Port A can be configured as
+ 24/16/8-bit port and Port B is fixed as 8-bit port.
+ Here these ports a represented as follows
+ port@0 -> Slice 0 Port A
+ port@1 -> Slice 0 Port B
+ port@2 -> Slice 1 Port A
+ port@3 -> Slice 1 Port B
+
+ Each camera port nodes should contain a 'port' child node with child
+ 'endpoint' node. Please refer to the bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+properties:
+ compatible:
+ const: ti,dra7-vip
+
+ label:
+ description: Instance name
+
+ reg:
+ items:
+ - description: The VIP main register region
+ - description: Video Data Parser (PARSER) register region for Slice0
+ - description: Color Space Conversion (CSC) register region for Slice0
+ - description: Scaler (SC) register region for Slice0
+ - description: Video Data Parser (PARSER) register region for Slice1
+ - description: Color Space Conversion (CSC) register region for Slice1
+ - description: Scaler (SC) register region for Slice1
+ - description: Video Port Direct Memory Access (VPDMA) register region
+
+ reg-names:
+ items:
+ - const: vip
+ - const: parser0
+ - const: csc0
+ - const: sc0
+ - const: parser1
+ - const: csc1
+ - const: sc1
+ - const: vpdma
+
+ interrupts:
+ minItems: 2
+ description:
+ IRQ index 0 is used for Slice0 interrupts
+ IRQ index 1 is used for Slice1 interrupts
+
+ ti,vip-clk-polarity:
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ description:
+ phandle to the device control module. The 1st argument should
+ contain the register offset to the CTRL_CORE_SMA_SW_1 register.
+ 2nd argument contains the bit field to slice 0 port A,
+ 3rd argument contains the bit field to slice 0 port B,
+ 4th argument contains the bit field to slice 1 port A,
+ 5th argument contains the bit field to slice 1 port B.
+
+ # See ./video-interfaces.txt for details
+ ports:
+ type: object
+ additionalProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ port@0:
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ const: 0
+ description: Slice 0 Port A
+
+ label:
+ description: Port name. Usually the pin group name
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ hsync-active:
+ maxItems: 1
+
+ vsync-active:
+ maxItems: 1
+
+ pclk-sample:
+ maxItems: 1
+
+ bus-width:
+ maxItems: 1
+
+ ti,vip-pixel-mux:
+ type: boolean
+ description:
+ In BT656/1120 mode, this enable pixel-muxing if
+ the number of channels is either 1, 2 or 4. If this
+ property is present then pixel-muxing is enabled
+ otherwise it will use line-muxing.
+
+ ti,vip-channels:
+ $ref: "/schemas/types.yaml#definitions/uint8-array"
+ minItems: 1
+ maxItems: 16
+ description: |-
+ In BT656/1120 mode, list of channel ids to be captured.
+ If the property is not present then 1 channel is assumed.
+
+ remote-endpoint: true
+
+ required:
+ - reg
+ - label
+
+ port@1:
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ const: 1
+ description: Slice 0 Port B
+
+ label:
+ description: Port name. Usually the pin group name
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ hsync-active:
+ maxItems: 1
+
+ vsync-active:
+ maxItems: 1
+
+ pclk-sample:
+ maxItems: 1
+
+ bus-width:
+ maxItems: 1
+
+ ti,vip-pixel-mux:
+ type: boolean
+ description:
+ In BT656/1120 mode, this enable pixel-muxing if
+ the number of channels is either 1, 2 or 4. If this
+ property is present then pixel-muxing is enabled
+ otherwise it will use line-muxing.
+
+ ti,vip-channels:
+ $ref: "/schemas/types.yaml#definitions/uint8-array"
+ minItems: 1
+ maxItems: 16
+ description:
+ In BT656/1120 mode, list of channel ids to be captured.
+ If the property is not present then 1 channel is assumed.
+
+ remote-endpoint: true
+
+ required:
+ - reg
+ - label
+
+ port@2:
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ const: 2
+ description: Slice 1 Port A
+
+ label:
+ description: Port name. Usually the pin group name
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ hsync-active:
+ maxItems: 1
+
+ vsync-active:
+ maxItems: 1
+
+ pclk-sample:
+ maxItems: 1
+
+ bus-width:
+ maxItems: 1
+
+ ti,vip-pixel-mux:
+ type: boolean
+ description:
+ In BT656/1120 mode, this enable pixel-muxing if
+ the number of channels is either 1, 2 or 4. If this
+ property is present then pixel-muxing is enabled
+ otherwise it will use line-muxing.
+
+ ti,vip-channels:
+ $ref: "/schemas/types.yaml#definitions/uint8-array"
+ minItems: 1
+ maxItems: 16
+ description:
+ In BT656/1120 mode, list of channel ids to be captured.
+ If the property is not present then 1 channel is assumed.
+
+ remote-endpoint: true
+
+ required:
+ - reg
+ - label
+
+ port@3:
+ type: object
+ additionalProperties: false
+
+ properties:
+ reg:
+ const: 3
+ description: Slice 1 Port B
+
+ label:
+ description: Port name. Usually the pin group name
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ hsync-active:
+ maxItems: 1
+
+ vsync-active:
+ maxItems: 1
+
+ pclk-sample:
+ maxItems: 1
+
+ bus-width:
+ maxItems: 1
+
+ ti,vip-pixel-mux:
+ type: boolean
+ description:
+ In BT656/1120 mode, this enable pixel-muxing if
+ the number of channels is either 1, 2 or 4. If this
+ property is present then pixel-muxing is enabled
+ otherwise it will use line-muxing.
+
+ ti,vip-channels:
+ $ref: "/schemas/types.yaml#definitions/uint8-array"
+ minItems: 1
+ maxItems: 16
+ description:
+ In BT656/1120 mode, list of channel ids to be captured.
+ If the property is not present then 1 channel is assumed.
+
+ remote-endpoint: true
+
+ required:
+ - reg
+ - label
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - port@0
+
+required:
+ - compatible
+ - label
+ - reg
+ - reg-names
+ - interrupts
+ - ti,vip-clk-polarity
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ vip1: vip@48970000 {
+ compatible = "ti,dra7-vip";
+ label = "vip1";
+ reg = <0x48970000 0x114>,
+ <0x48975500 0xD8>,
+ <0x48975700 0x18>,
+ <0x48975800 0x80>,
+ <0x48975a00 0xD8>,
+ <0x48975c00 0x18>,
+ <0x48975d00 0x80>,
+ <0x4897d000 0x400>;
+ reg-names = "vip",
+ "parser0",
+ "csc0",
+ "sc0",
+ "parser1",
+ "csc1",
+ "sc1",
+ "vpdma";
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+ ti,vip-clk-polarity = <&scm_conf 0x534 0x1 0x4 0x2 0x8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin1a: port@0 {
+ reg = <0>;
+ label = "vin1a";
+
+ vin1a_ep: endpoint {
+ remote-endpoint = <&camera1>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ bus-width = <8>;
+ };
+ };
+ vin1b: port@1 {
+ reg = <1>;
+ label = "vin1b";
+ };
+ vin2a: port@2 {
+ reg = <2>;
+ label = "vin2a";
+ };
+ vin2b: port@3 {
+ reg = <3>;
+ label = "vin2b";
+ };
+ };
+ };
+
+ i2c {
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@37 {
+ compatible = "ovti,ov10633";
+ reg = <0x37>;
+
+ clocks = <&fixed_clock>;
+ clocks-names = "xvclk";
+
+ port {
+ camera1: endpoint {
+ remote-endpoint = <&vin1a_ep>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ bus-width = <8>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 2e9a5f6e4ff7..06856d05b53b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16947,6 +16947,7 @@ S: Maintained
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
F: Documentation/devicetree/bindings/media/ti,cal.yaml
+F: Documentation/devicetree/bindings/media/ti,vip.yaml
F: Documentation/devicetree/bindings/media/ti,vpe.yaml
F: drivers/media/platform/ti-vpe/

--
2.17.1
\
 
 \ /
  Last update: 2020-05-23 00:54    [W:0.082 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site