lkml.org 
[lkml]   [2020]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 02/11] net: phy: Simplify MMD device list termination
Date
Since we are already checking for *devs == 0 after
the loop terminates, we can add a mostly F's check
as well. With that change we can simplify the return/break
sequence inside the loop.

Add a valid_phy_id() macro for this, since we will be using it
in a couple other places.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
drivers/net/phy/phy_device.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 245899b58a7d..7746c07b97fe 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -695,6 +695,11 @@ static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
return 0;
}

+static bool valid_phy_id(int val)
+{
+ return (val > 0 && ((val & 0x1fffffff) != 0x1fffffff));
+}
+
/**
* get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs.
* @bus: the target MII bus
@@ -732,18 +737,12 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, devs);
if (phy_reg < 0)
return -EIO;
- /* no device there, let's get out of here */
- if ((*devs & 0x1fffffff) == 0x1fffffff) {
- *phy_id = 0xffffffff;
- return 0;
- } else {
- break;
- }
+ break;
}
}

/* no reported devices */
- if (*devs == 0) {
+ if (!valid_phy_id(*devs)) {
*phy_id = 0xffffffff;
return 0;
}
--
2.26.2
\
 
 \ /
  Last update: 2020-05-22 23:32    [W:0.250 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site