lkml.org 
[lkml]   [2020]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH net-next 1/4] dt-bindings: net: Add tx and rx internal delays
Date
tx-internal-delays and rx-internal-delays are a common setting for RGMII
capable devices.

These properties are used when the phy-mode or phy-controller is set to
rgmii-id, rgmii-rxid or rgmii-txid. These modes indicate to the
controller that the PHY will add the internal delay for the connection.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
.../bindings/net/ethernet-controller.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index ac471b60ed6a..3f25066c339c 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -143,6 +143,20 @@ properties:
Specifies the PHY management type. If auto is set and fixed-link
is not specified, it uses MDIO for management.

+ rx-internal-delay:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: |
+ RGMII Receive PHY Clock Delay defined in pico seconds. This is used for
+ PHY's that have configurable RX internal delays. This property is only
+ used when the phy-mode or phy-connection-type is rgmii-id or rgmii-rxid.
+
+ tx-internal-delay:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: |
+ RGMII Transmit PHY Clock Delay defined in pico seconds. This is used for
+ PHY's that have configurable TX internal delays. This property is only
+ used when the phy-mode or phy-connection-type is rgmii-id or rgmii-txid.
+
fixed-link:
allOf:
- if:
--
2.26.2
\
 
 \ /
  Last update: 2020-05-21 19:50    [W:0.042 / U:1.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site