lkml.org 
[lkml]   [2020]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/2] opp: core: add regulators enable and disable
Hi,

On Fri, 15 May 2020 at 14:00, Clément Péron <peron.clem@gmail.com> wrote:
>
> Hi Viresh,
>
> On Fri, 15 May 2020 at 09:57, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > Hi,
> >
> > This series reintroduces the usage of regulator_enable/disable() to the
> > OPP core after the previous attempt was reverted [1] shortly after getting
> > applied. This time the regulator is enabled only after it is configured
> > by the OPP core.
> >
> > Marek, Kamil and Clément: Can you guys please test this out and report
> > if this doesn't work as expected ?
>
> I have reviewed the patch and it seems fine for my use case.
> Unfortunately I can't test it until next week.

Ok, before the patch the regulator was released by regulator_late_cleanup() :
[ 33.756849] vdd-gpu: disabling

Now it works fine and the vdd-gpu is no more disabled.

Tested-by: Clément Péron <peron.clem@gmail.com>

Regards,
Clement

>
> Acked-by: Clément Péron <peron.clem@gmail.com>
>
> Regards,
> Clement
>
>
> >
> > --
> > viresh
> >
> > [1] https://lore.kernel.org/lkml/20191017102758.8104-1-m.szyprowski@samsung.com/
> >
> > Kamil Konieczny (1):
> > opp: core: add regulators enable and disable
> >
> > Viresh Kumar (1):
> > opp: Reorder the code for !target_freq case
> >
> > drivers/opp/core.c | 39 ++++++++++++++++++++++++++++++++++-----
> > drivers/opp/opp.h | 2 ++
> > 2 files changed, 36 insertions(+), 5 deletions(-)
> >
> > --
> > 2.25.0.rc1.19.g042ed3e048af
> >

\
 
 \ /
  Last update: 2020-05-21 14:23    [W:0.084 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site