Messages in this thread | | | Date | Thu, 21 May 2020 13:23:51 +0300 | From | Andy Shevchenko <> | Subject | Re: [PATCH v3 06/16] spi: dw: Parameterize the DMA Rx/Tx burst length |
| |
On Thu, May 21, 2020 at 04:21:56AM +0300, Serge Semin wrote: > It isn't good to have numeric literals in the code especially if there > are multiple of them and they are related. Let's replace the Tx and Rx > burst level literals with the corresponding constants.
Thanks! Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> > Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> > Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> > Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> > Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> > Cc: Paul Burton <paulburton@kernel.org> > Cc: Ralf Baechle <ralf@linux-mips.org> > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: linux-mips@vger.kernel.org > Cc: devicetree@vger.kernel.org > > --- > > Changelog v3: > - Discard the dws->fifo_len utilization in the Tx FIFO DMA threshold > setting. > --- > drivers/spi/spi-dw-mid.c | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c > index 7bba774885cd..be02fedd87cb 100644 > --- a/drivers/spi/spi-dw-mid.c > +++ b/drivers/spi/spi-dw-mid.c > @@ -19,7 +19,9 @@ > > #define WAIT_RETRIES 5 > #define RX_BUSY 0 > +#define RX_BURST_LEVEL 16 > #define TX_BUSY 1 > +#define TX_BURST_LEVEL 16 > > static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param) > { > @@ -214,7 +216,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws, > memset(&txconf, 0, sizeof(txconf)); > txconf.direction = DMA_MEM_TO_DEV; > txconf.dst_addr = dws->dma_addr; > - txconf.dst_maxburst = 16; > + txconf.dst_maxburst = TX_BURST_LEVEL; > txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > txconf.dst_addr_width = convert_dma_width(dws->n_bytes); > txconf.device_fc = false; > @@ -288,7 +290,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws, > memset(&rxconf, 0, sizeof(rxconf)); > rxconf.direction = DMA_DEV_TO_MEM; > rxconf.src_addr = dws->dma_addr; > - rxconf.src_maxburst = 16; > + rxconf.src_maxburst = RX_BURST_LEVEL; > rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; > rxconf.src_addr_width = convert_dma_width(dws->n_bytes); > rxconf.device_fc = false; > @@ -313,8 +315,8 @@ static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer) > { > u16 imr = 0, dma_ctrl = 0; > > - dw_writel(dws, DW_SPI_DMARDLR, 0xf); > - dw_writel(dws, DW_SPI_DMATDLR, 0x10); > + dw_writel(dws, DW_SPI_DMARDLR, RX_BURST_LEVEL - 1); > + dw_writel(dws, DW_SPI_DMATDLR, TX_BURST_LEVEL); > > if (xfer->tx_buf) { > dma_ctrl |= SPI_DMA_TDMAE; > -- > 2.25.1 >
-- With Best Regards, Andy Shevchenko
| |