lkml.org 
[lkml]   [2020]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] dt-bindings: usb: dwc3: Add entry for tx-fifo-resize
Date
Re-introduce the comment for the tx-fifo-resize setting for the DWC3
controller. This allows for vendors to control if they require the TX FIFO
resizing logic on their HW, as the default FIFO size configurations may
already be sufficient.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 9946ff9..489f5da 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -105,7 +105,7 @@ Optional properties:
1-16 (DWC_usb31 programming guide section 1.2.3) to
enable periodic ESS TX threshold.

- - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+ - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
- snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0
register, undefined length INCR burst type enable and INCRx type.
When just one value, which means INCRX burst mode enabled. When
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2020-05-21 10:37    [W:0.058 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site