lkml.org 
[lkml]   [2020]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH v7 3/5] powerpc/papr_scm: Fetch nvdimm health information from PHYP
On Wed, May 20, 2020 at 10:45:58PM +0530, Vaibhav Jain wrote:
...

> > On Wed, May 20, 2020 at 12:30:56AM +0530, Vaibhav Jain wrote:

...

> >> @@ -39,6 +78,15 @@ struct papr_scm_priv {
> >> struct resource res;
> >> struct nd_region *region;
> >> struct nd_interleave_set nd_set;
> >> +
> >> + /* Protect dimm health data from concurrent read/writes */
> >> + struct mutex health_mutex;
> >> +
> >> + /* Last time the health information of the dimm was updated */
> >> + unsigned long lasthealth_jiffies;
> >> +
> >> + /* Health information for the dimm */
> >> + u64 health_bitmap;
> >
> > I wonder if this should be typed big endian as you mention that it is in the
> > commit message?
> This was discussed in an earlier review of the patch series at
> https://lore.kernel.org/linux-nvdimm/878sjetcis.fsf@mpe.ellerman.id.au
>
> Even though health bitmap is returned in big endian format (For ex
> value 0xC00000000000000 indicates bits 0,1 set), its value is never
> used. Instead only test for specific bits being set in the register is
> done.
>
> Hence using native cpu type instead of __be64 to store this value.

ok.

>
> >
> >> };
> >>
> >> static int drc_pmem_bind(struct papr_scm_priv *p)
> >> @@ -144,6 +192,62 @@ static int drc_pmem_query_n_bind(struct papr_scm_priv *p)
> >> return drc_pmem_bind(p);
> >> }
> >>
> >> +/*
> >> + * Issue hcall to retrieve dimm health info and populate papr_scm_priv with the
> >> + * health information.
> >> + */
> >> +static int __drc_pmem_query_health(struct papr_scm_priv *p)
> >> +{
> >> + unsigned long ret[PLPAR_HCALL_BUFSIZE];
> >
> > Is this exclusive to 64bit? Why not u64?
> Yes this is specific to 64 bit as the array holds 64 bit register values
> returned from PHYP. Can u64 but here that will be a departure from existing
> practice within arch/powerpc code to use an unsigned long array to fetch
> returned values for PHYP.
>
> >
> >> + s64 rc;
> >
> > plpar_hcall() returns long and this function returns int and rc is declared
> > s64?
> >
> > Why not have them all be long to follow plpar_hcall?
> Yes 'long' type is better suited for variable 'rc' and I will get it fixed.
>
> But the value of variable 'rc' is never directly returned from this
> function, we always return kernel error codes instead. Hence the
> return type of this function is consistent.

Honestly masking the error return of plpar_hcall() seems a problem as well...
but ok.

Ira

>
> >
> >> +
> >> + /* issue the hcall */
> >> + rc = plpar_hcall(H_SCM_HEALTH, ret, p->drc_index);
> >> + if (rc != H_SUCCESS) {
> >> + dev_err(&p->pdev->dev,
> >> + "Failed to query health information, Err:%lld\n", rc);
> >> + rc = -ENXIO;
> >> + goto out;
> >> + }
> >> +
> >> + p->lasthealth_jiffies = jiffies;
> >> + p->health_bitmap = ret[0] & ret[1];
> >> +
> >> + dev_dbg(&p->pdev->dev,
> >> + "Queried dimm health info. Bitmap:0x%016lx Mask:0x%016lx\n",
> >> + ret[0], ret[1]);
> >> +out:
> >> + return rc;
> >> +}
> >> +
> >> +/* Min interval in seconds for assuming stable dimm health */
> >> +#define MIN_HEALTH_QUERY_INTERVAL 60
> >> +
> >> +/* Query cached health info and if needed call drc_pmem_query_health */
> >> +static int drc_pmem_query_health(struct papr_scm_priv *p)
> >> +{
> >> + unsigned long cache_timeout;
> >> + s64 rc;
> >> +
> >> + /* Protect concurrent modifications to papr_scm_priv */
> >> + rc = mutex_lock_interruptible(&p->health_mutex);
> >> + if (rc)
> >> + return rc;
> >> +
> >> + /* Jiffies offset for which the health data is assumed to be same */
> >> + cache_timeout = p->lasthealth_jiffies +
> >> + msecs_to_jiffies(MIN_HEALTH_QUERY_INTERVAL * 1000);
> >> +
> >> + /* Fetch new health info is its older than MIN_HEALTH_QUERY_INTERVAL */
> >> + if (time_after(jiffies, cache_timeout))
> >> + rc = __drc_pmem_query_health(p);
> >
> > And back to s64 after returning int?
> Agree, will change 's64 rc' to 'int rc'.
>
> >
> >> + else
> >> + /* Assume cached health data is valid */
> >> + rc = 0;
> >> +
> >> + mutex_unlock(&p->health_mutex);
> >> + return rc;
> >> +}
> >>
> >> static int papr_scm_meta_get(struct papr_scm_priv *p,
> >> struct nd_cmd_get_config_data_hdr *hdr)
> >> @@ -286,6 +390,64 @@ static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
> >> return 0;
> >> }
> >>
> >> +static ssize_t flags_show(struct device *dev,
> >> + struct device_attribute *attr, char *buf)
> >> +{
> >> + struct nvdimm *dimm = to_nvdimm(dev);
> >> + struct papr_scm_priv *p = nvdimm_provider_data(dimm);
> >> + struct seq_buf s;
> >> + u64 health;
> >> + int rc;
> >> +
> >> + rc = drc_pmem_query_health(p);
> >
> > and back to int...
> >
> drc_pmem_query_health() returns an 'int' so the type of variable 'rc'
> looks correct to me.
>
> > Just make them long all through...
> I think the return type for above all functions is 'int' with
> an issue in drc_pmem_query_health() that you pointed out.
>
> With that fixed the usage of 'int' return type for functions will become
> consistent.
>
> >
> > Ira
> >
> >> + if (rc)
> >> + return rc;
> >> +
> >> + /* Copy health_bitmap locally, check masks & update out buffer */
> >> + health = READ_ONCE(p->health_bitmap);
> >> +
> >> + seq_buf_init(&s, buf, PAGE_SIZE);
> >> + if (health & PAPR_SCM_DIMM_UNARMED_MASK)
> >> + seq_buf_printf(&s, "not_armed ");
> >> +
> >> + if (health & PAPR_SCM_DIMM_BAD_SHUTDOWN_MASK)
> >> + seq_buf_printf(&s, "flush_fail ");
> >> +
> >> + if (health & PAPR_SCM_DIMM_BAD_RESTORE_MASK)
> >> + seq_buf_printf(&s, "restore_fail ");
> >> +
> >> + if (health & PAPR_SCM_DIMM_ENCRYPTED)
> >> + seq_buf_printf(&s, "encrypted ");
> >> +
> >> + if (health & PAPR_SCM_DIMM_SMART_EVENT_MASK)
> >> + seq_buf_printf(&s, "smart_notify ");
> >> +
> >> + if (health & PAPR_SCM_DIMM_SCRUBBED_AND_LOCKED)
> >> + seq_buf_printf(&s, "scrubbed locked ");
> >> +
> >> + if (seq_buf_used(&s))
> >> + seq_buf_printf(&s, "\n");
> >> +
> >> + return seq_buf_used(&s);
> >> +}
> >> +DEVICE_ATTR_RO(flags);
> >> +
> >> +/* papr_scm specific dimm attributes */
> >> +static struct attribute *papr_scm_nd_attributes[] = {
> >> + &dev_attr_flags.attr,
> >> + NULL,
> >> +};
> >> +
> >> +static struct attribute_group papr_scm_nd_attribute_group = {
> >> + .name = "papr",
> >> + .attrs = papr_scm_nd_attributes,
> >> +};
> >> +
> >> +static const struct attribute_group *papr_scm_dimm_attr_groups[] = {
> >> + &papr_scm_nd_attribute_group,
> >> + NULL,
> >> +};
> >> +
> >> static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
> >> {
> >> struct device *dev = &p->pdev->dev;
> >> @@ -312,8 +474,8 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
> >> dimm_flags = 0;
> >> set_bit(NDD_LABELING, &dimm_flags);
> >>
> >> - p->nvdimm = nvdimm_create(p->bus, p, NULL, dimm_flags,
> >> - PAPR_SCM_DIMM_CMD_MASK, 0, NULL);
> >> + p->nvdimm = nvdimm_create(p->bus, p, papr_scm_dimm_attr_groups,
> >> + dimm_flags, PAPR_SCM_DIMM_CMD_MASK, 0, NULL);
> >> if (!p->nvdimm) {
> >> dev_err(dev, "Error creating DIMM object for %pOF\n", p->dn);
> >> goto err;
> >> @@ -399,6 +561,9 @@ static int papr_scm_probe(struct platform_device *pdev)
> >> if (!p)
> >> return -ENOMEM;
> >>
> >> + /* Initialize the dimm mutex */
> >> + mutex_init(&p->health_mutex);
> >> +
> >> /* optional DT properties */
> >> of_property_read_u32(dn, "ibm,metadata-size", &metadata_size);
> >>
> >> --
> >> 2.26.2
> >> _______________________________________________
> >> Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
> >> To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
>
> --
> Cheers
> ~ Vaibhav

\
 
 \ /
  Last update: 2020-05-22 01:34    [W:0.253 / U:2.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site