lkml.org 
[lkml]   [2020]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3 0/3] ARM: imx: move cpu code to drivers/soc/imx
On Wed, May 20, 2020 at 01:51:26PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> V3:
> Rebased to latest next tree
> Resolved the conflicts with vf610 soc patch
>
> V2:
> Keep i.MX1/2/3/5 cpu type for completness
> Correct return value in patch 1/3
> use CONFIG_ARM to guard compile soc-imx.c in patch 3/3
>
> V1:
> https://patchwork.kernel.org/cover/11433689/
> RFC version :
> https://patchwork.kernel.org/cover/11336433/
>
> Nothing changed in v1, just rename to formal patches
>
> Shawn,
> The original concern has been eliminated in RFC discussion,
> so this patchset is ready to be in next.
> Thanks.
>
> Follow i.MX8, move the soc device register code to drivers/soc/imx
> to simplify arch/arm/mach-imx/cpu.c
>
> I planned to use similar logic as soc-imx8m.c to restructure soc-imx.c
> and merged the two files into one. But not sure, so still keep
> the logic in cpu.c.
>
> There is one change is the platform devices are not under
> /sys/devices/soc0 after patch 1/4. Actually ARM64 platform
> devices are not under /sys/devices/soc0, such as i.MX8/8M.
> So it should not hurt to let the platform devices under platform dir.
>
> Peng Fan (3):
> ARM: imx: use device_initcall for imx_soc_device_init
> ARM: imx: move cpu definitions into a header
> soc: imx: move cpu code to drivers/soc/imx

Applied all, thanks.

\
 
 \ /
  Last update: 2020-05-20 17:11    [W:0.090 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site