lkml.org 
[lkml]   [2020]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 18/20] mips: csrc-r4k: Decrease r4k-clocksource rating if CPU_FREQ enabled
On Tue, May 19, 2020 at 05:50:53PM +0200, Thomas Bogendoerfer wrote:
> On Mon, May 18, 2020 at 11:57:52PM +0300, Serge Semin wrote:
> > On Mon, May 18, 2020 at 06:32:06PM +0200, Thomas Bogendoerfer wrote:
> > > On Mon, May 18, 2020 at 04:48:20PM +0300, Serge Semin wrote:
> > > > On Fri, May 15, 2020 at 11:06:47PM +0200, Thomas Bogendoerfer wrote:
> > > > > On Fri, May 15, 2020 at 10:48:27AM +0300, Serge Semin wrote:
> > > > > > Thomas,
> > > > > > Could you take a look at my comment below so I could proceed with the
> > > > > > patchset v3 development?
> > > > >
> > > > > I can't help, but using r4k clocksource with changing frequency is
> > > > > probaly only usefull as a random generator. So IMHO the only two
> > > > > options are disabling it or implement what arch/x86/kernel/tsc.c does.
> > > > >
> > > > > Thomas.
> > > >
> > > > Thomas, could you proceed with the rest of the patches review?
> > > > ├─>[PATCH v2 16/20] bus: cdmm: Add MIPS R5 arch support
> > > > ├─>[PATCH v2 15/20] mips: cdmm: Add mti,mips-cdmm dtb node support
> > >
> > > both are not my call, but look ok to me.
> >
> > Can I add your Reviewed-by tag there then?
>
> only for 16/20. 15/20 looks ok to me, but I have not enough insides
> on the hardware to say this is good.

Ok.

>
> > > > ├─>[PATCH v2 13/20] mips: early_printk_8250: Use offset-sized IO-mem accessors
> > >
> > > that's broken. A reg shift of 2 doesn't mean we could use 32bit access
> > > to the registers on other platforms. As I don't think adding some ifdefery
> > > makes things nicer, just implement the your prom_putchar in board code.
> >
> > I thought about that initially, but then I decided to alter the generic
> > early_printk_8250 code instead. My version of prom_putchar() would be almost
> > the same as one implemented in the early_printk_8250 module except minor
> > modification of replacing readb/writeb methods with readl/writel. So I didn't
> > want to duplicate the code, but wanted to provide a general way to fix the
> > problem potentially also for another platforms.
> >
> > Since you don't like this fix alternatively I'd suggest to add the reg_width
> > parameter passed to the setup_8250_early_printk_port() method like this:
> > -setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift,
> > - unsigned int timeout)
> > +setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift,
> > + unsigned int reg_width, unsigned int timeout)
> >
> > By reg_width parameter we could determine the actual width of the register:
> > static inline u8 serial_in(int offset)
> > {
> > - return readb(serial8250_base + (offset << serial8250_reg_shift));
> > + u8 ret = 0xFF;
> > +
> > + offset <<= serial8250_reg_shift;
> > + switch (serial8250_reg_width) {
> > + case 1:
> > + ret = readb(serial8250_base + offset);
> > + break;
> > + case 2:
> > + ret = readw(serial8250_base + offset);
> > + break;
> > + case 4:
> > + ret = readl(serial8250_base + offset);
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + return ret;
> > }
> >
> > The similar modification will be implemented for serial_out(). I'll also modify
>
> look at the lines of code you are adding. Doing your own prom_putchar will
> probably have less lines.
>
> > What do you think about this?
>
> please do your own prom_putchar.
>

Ok.

>
> > >
> > > > ├─>[PATCH v2 12/20] mips: MAAR: Add XPA mode support
> > >
> > > looks ok so far.
> >
> > Can I add your Reviewed-by tag there then?
>
> As I'm the maintainer of the part, I've simply applied it.
>
> > >
> > > > ├─>[PATCH v2 10/20] mips: Add CONFIG/CONFIG6/Cause reg fields macro
> > >
> > > that is fine
> >
> > Can I add your Reviewed-by tag there then?
>
> As this didn't apply cleanly, I'll apply it after you've resent it.
> IMHO no need for a Reviewed-by.

Ok.

>
> > > > └─>[PATCH v2 09/20] mips: Add CP0 Write Merge config support
> > >
> > > this is IMHO a dangerous change. Enabling write merging for any
> > > CPU supporting it might triggers bugs. Do it in your board bringup
> > > code and at the moment I don't see a reason for the rest of that
> > > patch.
> >
> > Let's at least leave the mm_config() implementation but without the write-merge
> > enabling by default. Providing features availability macro
> > cpu_has_mm_sysad/cpu_has_mm_full and c0 config fields
>
> do you have a user of that ? I'm not introducing code nobody uses.
>

See my comment below.

> > I could use them to implement a code pattern like:
> >
> > + if (cpu_has_mm_full) {
> > + unsigned int config0 = read_c0_config();
> > + config0 = (config0 & ~MIPS_CONF_MM) | MIPS_CONF_MM_FULL;
> > + write_c0_config(config0);
> > + }
>
> you know you are running on a R5 core, so you know you have MM_FULL.
> No need to check this.
>
> > By doing so I can manually enable/disable the MM feature in the
> > cpu-feature-overrides.h. Without that I'd have to locally define these macro,
> > which isn't good seeing they are in fact generic and can be useful for other
> > platforms with SYSAD and FULL MM feature available. What do you think?
>
> To me this is a hardware feature I expect to be done by firmware and
> Linux shouldn't care about it, if it doesn't have any software
> implications.

I think there is a misunderstanding here. In this patch I am not enabling
Write-Merge feature for any memory range. I am enabling the UCA Cache Coherency
attribute to be available for utilization. See the user-manual info regarding
the CP0.CONFIG.MM field:
Write Merge.This bit indicates whether write-through merging is enabled
in the 32-byte collapsing write buffer.
0: No merging allowed
1: Merging allowed

In order to have the Write-merging really enabled for a particular PFN one have
to mark its TLB entry with UCA (EntryLoX.C[3:5] = 7) attribute. So in this patch
I am attempting to detect whether the feature is either already enabled or if
available to enable it for utilization.

If there is no misunderstanding and you said what you said, that even enabling
the feature for utilization might be dangerous, let's at least leave the
MIPS_CONF_MM, MIPS_CONF_MM_FULL and MIPS_CONF_MM_SYS_SYSAD fields
definition in the "arch/mips/include/asm/mipsregs.h" header. I'll use
them to enable the write-merge in my platform code.

What do you think?

-Sergey

>
> Thomas.
>
> --
> Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
> good idea. [ RFC1925, 2.3 ]

\
 
 \ /
  Last update: 2020-05-20 14:00    [W:1.333 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site