lkml.org 
[lkml]   [2020]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v5 1/5] dt-bindings: remoteproc: Add Qualcomm PIL info binding
    On Tue, May 12, 2020 at 10:56:37PM -0700, Bjorn Andersson wrote:
    > Add a devicetree binding for the Qualcomm peripheral image loader
    > relocation information region found in the IMEM.
    >
    > Reviewed-by: Stephen Boyd <swboyd@chromium.org>
    > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
    > ---
    >
    > Changes since v4:
    > - Fixed reg in example to make it compile
    >
    > .../bindings/remoteproc/qcom,pil-info.yaml | 44 +++++++++++++++++++
    > 1 file changed, 44 insertions(+)
    > create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml

    Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

    >
    > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
    > new file mode 100644
    > index 000000000000..87c52316ddbd
    > --- /dev/null
    > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
    > @@ -0,0 +1,44 @@
    > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
    > +%YAML 1.2
    > +---
    > +$id: http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#
    > +$schema: http://devicetree.org/meta-schemas/core.yaml#
    > +
    > +title: Qualcomm peripheral image loader relocation info binding
    > +
    > +maintainers:
    > + - Bjorn Andersson <bjorn.andersson@linaro.org>
    > +
    > +description:
    > + The Qualcomm peripheral image loader relocation memory region, in IMEM, is
    > + used for communicating remoteproc relocation information to post mortem
    > + debugging tools.
    > +
    > +properties:
    > + compatible:
    > + const: qcom,pil-reloc-info
    > +
    > + reg:
    > + maxItems: 1
    > +
    > +required:
    > + - compatible
    > + - reg
    > +
    > +examples:
    > + - |
    > + imem@146bf000 {
    > + compatible = "syscon", "simple-mfd";
    > + reg = <0x146bf000 0x1000>;
    > +
    > + #address-cells = <1>;
    > + #size-cells = <1>;
    > +
    > + ranges = <0 0x146bf000 0x1000>;
    > +
    > + pil-reloc@94c {
    > + compatible = "qcom,pil-reloc-info";
    > + reg = <0x94c 0xc8>;
    > + };
    > + };
    > +...
    > --
    > 2.26.2
    >

    \
     
     \ /
      Last update: 2020-05-20 20:00    [W:4.066 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site