lkml.org 
[lkml]   [2020]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 2/4] firmware: raspberrypi: Introduce vl805 init routine
From
Date
Hi Nicolas,

Am 29.04.20 um 18:47 schrieb Nicolas Saenz Julienne:
> The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip
> that implements xHCI. After a PCI reset, VL805's firmware may either be
> loaded directly from an EEPROM or, if not present, by the SoC's
> co-processor, VideoCore. RPi4's VideoCore OS contains both the non public
> firmware load logic and the VL805 firmware blob. The function this patch
> introduces triggers the aforementioned process.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>
> ---
>
> Change since v6:
> - Add test to avoid loading the firmware when not needed
> - Since we have it around, print VL805's firmware version, it'll make
> debugging easier in the future
> - Correct typos
> - Add a clearer view of HW topology in patch description
>
> Changes since v4:
> - Inline function definition when RASPBERRYPI_FIRMWARE is not defined
>
> Changes since v1:
> - Move include into .c file and add forward declaration to .h
>
> drivers/firmware/raspberrypi.c | 52 ++++++++++++++++++++++
> include/soc/bcm2835/raspberrypi-firmware.h | 7 +++
> 2 files changed, 59 insertions(+)
>
> diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
> index da26a584dca0..230c05e53403 100644
> --- a/drivers/firmware/raspberrypi.c
> +++ b/drivers/firmware/raspberrypi.c
> @@ -12,6 +12,8 @@
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> +#include <linux/pci.h>
> +#include <linux/delay.h>
> #include <soc/bcm2835/raspberrypi-firmware.h>
>
> #define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf))
> @@ -19,6 +21,8 @@
> #define MBOX_DATA28(msg) ((msg) & ~0xf)
> #define MBOX_CHAN_PROPERTY 8
>
> +#define VL805_PCI_CONFIG_VERSION_OFFSET 0x50
> +
> static struct platform_device *rpi_hwmon;
> static struct platform_device *rpi_clk;
>
> @@ -286,6 +290,54 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
> }
> EXPORT_SYMBOL_GPL(rpi_firmware_get);
>
> +/*
> + * The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that
> + * implements xHCI. After a PCI reset, VL805's firmware may either be loaded
> + * directly from an EEPROM or, if not present, by the SoC's co-processor,
> + * VideoCore. RPi4's VideoCore OS contains both the non public firmware load
> + * logic and the VL805 firmware blob. This function triggers the aforementioned
> + * process.
> + */
> +int rpi_firmware_init_vl805(struct pci_dev *pdev)
> +{
> + struct device_node *fw_np;
> + struct rpi_firmware *fw;
> + u32 dev_addr, version;
> + int ret = 0;
> +
> + fw_np = of_find_compatible_node(NULL, NULL,
> + "raspberrypi,bcm2835-firmware");
> + if (!fw_np)
> + return 0;
> +
> + fw = rpi_firmware_get(fw_np);
> + of_node_put(fw_np);
> + if (!fw)
> + return -ENODEV;
> +
> + /* Make sure we don't trigger a firmware load unnecesarely *
s/unnecesarely/unnecessarily/
> + pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version);
pci_read_config_dword() can fail, we might want to store the return value?
> + if (version)
> + goto exit;
> +
> + dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 |
> + PCI_FUNC(pdev->devfn) << 12;
> +
> + ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET,
> + &dev_addr, sizeof(dev_addr));
> + /* Wait for vl805 to startup */
> + udelay(200);

I know, it makes it harder to read but do we really want to wait
unnecessarily if rpi_firmware_property failed?

Btw i assume we are in non-atomic context, so maybe it's worth to use
usleep_range() here?

> +
> +exit:
> + if (!version)
> + pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET,
> + &version);
> + pci_info(pdev, "VL805 firmware version %08x\n", version);

In case pci_read_config_dword() fails the return code would be more helpful.

Best regards

> + return ret;
> +
> +}
> +EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805);
> +
> static const struct of_device_id rpi_firmware_of_match[] = {
> { .compatible = "raspberrypi,bcm2835-firmware", },
> {},
> diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
> index cc9cdbc66403..3025aca3c358 100644
> --- a/include/soc/bcm2835/raspberrypi-firmware.h
> +++ b/include/soc/bcm2835/raspberrypi-firmware.h
> @@ -10,6 +10,7 @@
> #include <linux/of_device.h>
>
> struct rpi_firmware;
> +struct pci_dev;
>
> enum rpi_firmware_property_status {
> RPI_FIRMWARE_STATUS_REQUEST = 0,
> @@ -141,6 +142,7 @@ int rpi_firmware_property(struct rpi_firmware *fw,
> int rpi_firmware_property_list(struct rpi_firmware *fw,
> void *data, size_t tag_size);
> struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node);
> +int rpi_firmware_init_vl805(struct pci_dev *pdev);
> #else
> static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag,
> void *data, size_t len)
> @@ -158,6 +160,11 @@ static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware
> {
> return NULL;
> }
> +
> +static inline int rpi_firmware_init_vl805(struct pci_dev *pdev)
> +{
> + return 0;
> +}
> #endif
>
> #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */

\
 
 \ /
  Last update: 2020-05-02 11:07    [W:3.532 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site