lkml.org 
[lkml]   [2020]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 10/10] arm64: dts: actions: Add uSD support for Cubieboard7
    Date
    This commit adds uSD support for Cubieboard7 board based on Actions Semi
    S700 SoC. SD0 is connected to uSD slot. Since there is no PMIC support
    added yet, fixed regulator has been used as a regulator node.

    Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
    ---
    Changes since v1:
    * No change.
    Changes since RFC:
    * No change.
    ---
    arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 41 ++++++++++++++++++++++++
    arch/arm64/boot/dts/actions/s700.dtsi | 1 +
    2 files changed, 42 insertions(+)

    diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
    index 63e375cd9eb4..ec117eb12f3a 100644
    --- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
    +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
    @@ -13,6 +13,7 @@

    aliases {
    serial3 = &uart3;
    + mmc0 = &mmc0;
    };

    chosen {
    @@ -28,6 +29,23 @@
    device_type = "memory";
    reg = <0x1 0xe0000000 0x0 0x0>;
    };
    +
    + /* Fixed regulator used in the absence of PMIC */
    + vcc_3v1: vcc-3v1 {
    + compatible = "regulator-fixed";
    + regulator-name = "fixed-3.1V";
    + regulator-min-microvolt = <3100000>;
    + regulator-max-microvolt = <3100000>;
    + };
    +
    + /* Fixed regulator used in the absence of PMIC */
    + sd_vcc: sd-vcc {
    + compatible = "regulator-fixed";
    + regulator-name = "fixed-3.1V";
    + regulator-min-microvolt = <3100000>;
    + regulator-max-microvolt = <3100000>;
    + regulator-always-on;
    + };
    };

    &i2c0 {
    @@ -81,6 +99,14 @@
    bias-pull-up;
    };
    };
    +
    + mmc0_default: mmc0_default {
    + pinmux {
    + groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
    + "sd0_cmd_mfp", "sd0_clk_mfp";
    + function = "sd0";
    + };
    + };
    };

    &timer {
    @@ -90,3 +116,18 @@
    &uart3 {
    status = "okay";
    };
    +
    +/* uSD */
    +&mmc0 {
    + status = "okay";
    + pinctrl-names = "default";
    + pinctrl-0 = <&mmc0_default>;
    + cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
    + no-sdio;
    + no-mmc;
    + no-1-8-v;
    + bus-width = <4>;
    + vmmc-supply = <&sd_vcc>;
    + vqmmc-supply = <&sd_vcc>;
    +};
    +
    diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
    index 0d3ff315b00e..18700aeb8d2b 100644
    --- a/arch/arm64/boot/dts/actions/s700.dtsi
    +++ b/arch/arm64/boot/dts/actions/s700.dtsi
    @@ -4,6 +4,7 @@
    */

    #include <dt-bindings/clock/actions,s700-cmu.h>
    +#include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/reset/actions,s700-reset.h>

    --
    2.7.4
    \
     
     \ /
      Last update: 2020-05-19 20:24    [W:2.744 / U:0.052 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site