lkml.org 
[lkml]   [2020]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 1/4] dt-bindings: iio: imu: bmi160: convert txt format to yaml
    Date
    Converts documentation from txt format to yaml 

    Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
    ---
    .../devicetree/bindings/iio/imu/bmi160.txt | 37 --------
    .../devicetree/bindings/iio/imu/bmi160.yaml | 84 +++++++++++++++++++
    2 files changed, 84 insertions(+), 37 deletions(-)
    delete mode 100644 Documentation/devicetree/bindings/iio/imu/bmi160.txt
    create mode 100644 Documentation/devicetree/bindings/iio/imu/bmi160.yaml

    diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt
    deleted file mode 100644
    index 900c169de00f..000000000000
    --- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt
    +++ /dev/null
    @@ -1,37 +0,0 @@
    -Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope
    -and externally connectable Magnetometer
    -
    -https://www.bosch-sensortec.com/bst/products/all_products/bmi160
    -
    -Required properties:
    - - compatible : should be "bosch,bmi160"
    - - reg : the I2C address or SPI chip select number of the sensor
    - - spi-max-frequency : set maximum clock frequency (only for SPI)
    -
    -Optional properties:
    - - interrupts : interrupt mapping for IRQ
    - - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
    - input, set to "INT2" if INT2 pin should be used instead
    - - drive-open-drain : set if the specified interrupt pin should be configured as
    - open drain. If not set, defaults to push-pull.
    -
    -Examples:
    -
    -bmi160@68 {
    - compatible = "bosch,bmi160";
    - reg = <0x68>;
    -
    - interrupt-parent = <&gpio4>;
    - interrupts = <12 IRQ_TYPE_EDGE_RISING>;
    - interrupt-names = "INT1";
    -};
    -
    -bmi160@0 {
    - compatible = "bosch,bmi160";
    - reg = <0>;
    - spi-max-frequency = <10000000>;
    -
    - interrupt-parent = <&gpio2>;
    - interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
    - interrupt-names = "INT2";
    -};
    diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bmi160.yaml
    new file mode 100644
    index 000000000000..6b464ce5ed0b
    --- /dev/null
    +++ b/Documentation/devicetree/bindings/iio/imu/bmi160.yaml
    @@ -0,0 +1,84 @@
    +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
    +%YAML 1.2
    +---
    +$id: http://devicetree.org/schemas/iio/imu/bmi160.yaml#
    +$schema: http://devicetree.org/meta-schemas/core.yaml#
    +
    +title: Bosch BMI160
    +
    +maintainers:
    + - can't find a mantainer, author is Daniel Baluta <daniel.baluta@intel.com>
    +
    +description: |
    + Inertial Measurement Unit with Accelerometer, Gyroscope and externally
    + connectable Magnetometer
    + https://www.bosch-sensortec.com/bst/products/all_products/bmi160
    +
    +properties:
    + compatible:
    + const: bosch,bmi160
    +
    + reg:
    + maxItems: 1
    + description: the I2C address or SPI chip select number of the sensor
    +
    + spi-max-frequency:
    + maxItems: 1
    + description: set maximum clock frequency (required only for SPI)
    +
    + interrupts:
    + maxItems: 1
    + description: interrupt mapping for IRQ
    +
    + interrupt-names:
    + minItems: 1
    + maxItems: 1
    + items:
    + enum:
    + - INT1
    + - INT2
    + description: |
    + set to "INT1" if INT1 pin should be used as interrupt input, set
    + to "INT2" if INT2 pin should be used instead
    +
    + drive-open-drain:
    + description: |
    + set if the specified interrupt pin should be configured as
    + open drain. If not set, defaults to push-pull.
    +
    +required:
    + - compatible
    + - reg
    +
    +examples:
    + - |
    + // Example for I2C
    + i2c@78b7000 {
    + reg = <0x78b6000 0x600>;
    + #address-cells = <1>;
    + #size-cells = <0>;
    +
    + bmi160@68 {
    + compatible = "bosch,bmi160";
    + reg = <0x68>;
    + interrupt-parent = <&gpio4>;
    + interrupts = <12 1>;
    + interrupt-names = "INT1";
    + };
    + - |
    + // Example for SPI
    + spi@78b7000 {
    + reg = <0x78b7000 0x600>,
    + <0x7884000 0x23000>;
    + #address-cells = <1>;
    + #size-cells = <0>;
    +
    + bmi160@0 {
    + compatible = "bosch,bmi160";
    + reg = <0>;
    + spi-max-frequency = <10000000>;
    + interrupt-parent = <&gpio2>;
    + interrupts = <12 1>;
    + interrupt-names = "INT2";
    + };
    + };
    --
    2.17.1
    \
     
     \ /
      Last update: 2020-05-19 09:53    [W:3.785 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site