Messages in this thread | | | Date | Wed, 20 May 2020 09:05:59 +0800 | From | Shawn Guo <> | Subject | Re: [PATCH] arm64: dts: imx8mm: Add node for SPDIF |
| |
On Sat, May 02, 2020 at 08:20:11AM -0500, Adam Ford wrote: > The i.MX8M Mini can support SPIDF which is very similar to the > IP used on the i.MX35. > > This patch adds the SPIF node. > > Signed-off-by: Adam Ford <aford173@gmail.com> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi > index d46e727fc362..00aad55ece65 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi > @@ -358,6 +358,29 @@ micfil: micfil@30080000 { > status = "disabled"; > }; > > + spdif1: spdif@30090000 {
It should be in a patch series with previous micfil one, as it cannot be applied independently.
> + compatible = "fsl,imx8mm-spdif", "fsl,imx35-spdif"; > + reg = <0x30090000 0x10000>; > + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ > + <&clk IMX8MM_CLK_24M>, /* rxtx0 */ > + <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ > + <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ > + <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ > + <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ > + <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ > + <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ > + <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ > + <&clk IMX8MM_CLK_DUMMY>; /* spba */ > + clock-names = "core", "rxtx0", > + "rxtx1", "rxtx2", > + "rxtx3", "rxtx4", > + "rxtx5", "rxtx6", > + "rxtx7", "spba"; > + dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; > + dma-names = "rx", "tx"; > + status = "disabled"; > + };
Have a newline between nodes.
Shawn
> gpio1: gpio@30200000 { > compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; > reg = <0x30200000 0x10000>; > -- > 2.25.1 >
| |