lkml.org 
[lkml]   [2020]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 25/25] hrtimer: Use sequence counter with associated raw spinlock
Date
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.

Use the new seqcount_raw_spinlock_t data type, which allows to associate
a raw spinlock with the sequence counter. This enables lockdep to verify
that the raw spinlock used for writer serialization is held when the
write side critical section is entered.

If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.

Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
---
include/linux/hrtimer.h | 2 +-
kernel/time/hrtimer.c | 13 ++++++++++---
2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 15c8ac313678..25993b86ac5c 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -159,7 +159,7 @@ struct hrtimer_clock_base {
struct hrtimer_cpu_base *cpu_base;
unsigned int index;
clockid_t clockid;
- seqcount_t seq;
+ seqcount_raw_spinlock_t seq;
struct hrtimer *running;
struct timerqueue_head active;
ktime_t (*get_time)(void);
diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
index d89da1c7e005..c4038511d5c9 100644
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -135,7 +135,11 @@ static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
* timer->base->cpu_base
*/
static struct hrtimer_cpu_base migration_cpu_base = {
- .clock_base = { { .cpu_base = &migration_cpu_base, }, },
+ .clock_base = { {
+ .cpu_base = &migration_cpu_base,
+ .seq = SEQCNT_RAW_SPINLOCK_ZERO(migration_cpu_base.seq,
+ &migration_cpu_base.lock),
+ }, },
};

#define migration_base migration_cpu_base.clock_base[0]
@@ -1998,8 +2002,11 @@ int hrtimers_prepare_cpu(unsigned int cpu)
int i;

for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
- cpu_base->clock_base[i].cpu_base = cpu_base;
- timerqueue_init_head(&cpu_base->clock_base[i].active);
+ struct hrtimer_clock_base *clock_b = &cpu_base->clock_base[i];
+
+ clock_b->cpu_base = cpu_base;
+ seqcount_raw_spinlock_init(&clock_b->seq, &cpu_base->lock);
+ timerqueue_init_head(&clock_b->active);
}

cpu_base->cpu = cpu;
--
2.20.1
\
 
 \ /
  Last update: 2020-05-19 23:49    [W:0.962 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site