lkml.org 
[lkml]   [2020]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2 4/5] Input: EXC3000: Add support to query model and fw_version
Hi,

On Tue, May 19, 2020 at 11:12:16PM +0200, Enric Balletbo i Serra wrote:
> On 19/5/20 20:24, Sebastian Reichel wrote:
> > Expose model and fw_version via sysfs. Also query the model
> > in probe to make sure, that the I2C communication with the
> > device works before successfully probing the driver.
> >
> > This is a bit complicated, since EETI devices do not have
> > a sync interface. Sending the commands and directly reading
> > does not work. Sending the command and waiting for some time
> > is also not an option, since there might be touch events in
> > the mean time.
> >
> > Last but not least we do not cache the results, since this
> > interface can be used to check the I2C communication is still
> > working as expected.
> >
> > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> > ---
> > drivers/input/touchscreen/exc3000.c | 138 +++++++++++++++++++++++++++-
> > 1 file changed, 137 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
> > index 9622cba514b3..1ae758bbf627 100644
> > --- a/drivers/input/touchscreen/exc3000.c
> > +++ b/drivers/input/touchscreen/exc3000.c
> > @@ -24,6 +24,9 @@
> > #define EXC3000_LEN_FRAME 66
> > #define EXC3000_LEN_POINT 10
> >
> > +#define EXC3000_LEN_MODEL_NAME 16
> > +#define EXC3000_LEN_FW_VERSION 16
> > +
> > #define EXC3000_MT1_EVENT 0x06
> > #define EXC3000_MT2_EVENT 0x18
> >
> > @@ -64,6 +67,11 @@ struct exc3000_data {
> > struct touchscreen_properties prop;
> > struct timer_list timer;
> > u8 buf[2 * EXC3000_LEN_FRAME];
> > + struct completion wait_event;
> > + struct mutex query_lock;
> > + int query_result;
> > + char model[EXC3000_LEN_MODEL_NAME];
> > + char fw_version[EXC3000_LEN_FW_VERSION];
> > };
> >
> > static void exc3000_report_slots(struct input_dev *input,
> > @@ -149,6 +157,28 @@ static int exc3000_read_data(struct exc3000_data *data,
> > return 0;
> > }
> >
> > +static int exc3000_query_interrupt(struct exc3000_data *data)
> > +{
> > + u8 *buf = data->buf;
> > + int err;
> > +
> > + err = i2c_master_recv(data->client, buf, EXC3000_LEN_FRAME);
> > + if (err < 0)
> > + return err;
> > +
> > + if (buf[0] != 0x42)
> > + return -EPROTO;
> > +
> > + if (buf[4] == 'E')
> > + strlcpy(data->model, buf+5, sizeof(data->model));
> > + else if (buf[4] == 'D')
> > + strlcpy(data->fw_version, buf+5, sizeof(data->fw_version));
> > + else
> > + return -EPROTO;
> > +
> > + return 0;
> > +}
> > +
> > static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
> > {
> > struct exc3000_data *data = dev_id;
> > @@ -157,6 +187,12 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
> > int slots, total_slots;
> > int error;
> >
> > + if (mutex_is_locked(&data->query_lock)) {
> > + data->query_result = exc3000_query_interrupt(data);
> > + complete(&data->wait_event);
> > + goto out;
> > + }
> > +
> > error = exc3000_read_data(data, buf, &total_slots);
> > if (error) {
> > /* Schedule a timer to release "stuck" contacts */
> > @@ -184,11 +220,94 @@ static irqreturn_t exc3000_interrupt(int irq, void *dev_id)
> > return IRQ_HANDLED;
> > }
> >
> > +static int fw_version_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct exc3000_data *data = dev_get_drvdata(dev);
> > + static const u8 request[68] = {
> > + 0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'D', 0x00
> > + };
> > + struct i2c_client *client = data->client;
> > + int err;
> > +
> > + mutex_lock(&data->query_lock);
> > +
> > + data->query_result = -ETIMEDOUT;
> > + reinit_completion(&data->wait_event);
> > +
> > + err = i2c_master_send(client, request, sizeof(request));
> > + if (err < 0) {
> > + mutex_unlock(&data->query_lock);
> > + return err;
> > + }
> > +
> > + wait_for_completion_interruptible_timeout(&data->wait_event, 1*HZ);
> > + mutex_unlock(&data->query_lock);
> > +
> > + if (data->query_result < 0)
> > + return data->query_result;
> > +
> > + return sprintf(buf, "%s\n", data->fw_version);
> > +}
> > +static DEVICE_ATTR_RO(fw_version);
> > +
>
> You should probably document the new sysfs entries, although are
> self-explanatory.

I suppose I could create
Documentation/ABI/testing/sysfs-driver-input-exc3000 or is there a
better place for sysfs API documentation of input devices?

> > +static ssize_t exc3000_get_model(struct exc3000_data *data)
> > +{
> > + static const u8 request[68] = {
> > + 0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'E', 0x00
> > + };
> > + struct i2c_client *client = data->client;
> > + int err;
> > +
> > + mutex_lock(&data->query_lock);
> > + data->query_result = -ETIMEDOUT;
> > + reinit_completion(&data->wait_event);
> > +
> > + err = i2c_master_send(client, request, sizeof(request));
> > + if (err < 0) {
> > + mutex_unlock(&data->query_lock);
> > + return err;
> > + }
> > +
> > + wait_for_completion_interruptible_timeout(&data->wait_event, 1 * HZ);
> > + mutex_unlock(&data->query_lock);
> > +
> > + return data->query_result;
> > +}
> > +
> > +static ssize_t model_show(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
> > + struct exc3000_data *data = dev_get_drvdata(dev);
> > + int err = exc3000_get_model(data);
> > +
> > + if (err < 0)
> > + return err;
> > +
> > + return sprintf(buf, "%s\n", data->model);
> > +}
> > +static DEVICE_ATTR_RO(model);
> > +
> > +static struct attribute *sysfs_attrs[] = {
> > + &dev_attr_fw_version.attr,
> > + &dev_attr_model.attr,
> > + NULL
> > +};
> > +
> > +static struct attribute_group exc3000_attribute_group = {
> > + .attrs = sysfs_attrs
> > +};
> > +
> > +static const struct attribute_group *exc3000_attribute_groups[] = {
> > + &exc3000_attribute_group,
> > + NULL
> > +};
> > +
> > static int exc3000_probe(struct i2c_client *client)
> > {
> > struct exc3000_data *data;
> > struct input_dev *input;
> > - int error, max_xy;
> > + int error, max_xy, retry;
> >
> > data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
> > if (!data)
> > @@ -202,15 +321,19 @@ static int exc3000_probe(struct i2c_client *client)
> > data->info = &exc3000_info[eeti_dev_id];
> > }
> > timer_setup(&data->timer, exc3000_timer, 0);
> > + init_completion(&data->wait_event);
> > + mutex_init(&data->query_lock);
> >
> > input = devm_input_allocate_device(&client->dev);
> > if (!input)
> > return -ENOMEM;
> >
> > data->input = input;
> > + input_set_drvdata(input, data);
> >
> > input->name = data->info->name;
> > input->id.bustype = BUS_I2C;
> > + input->dev.groups = exc3000_attribute_groups;
> >
> > max_xy = data->info->max_xy;
> > input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0);
> > @@ -233,6 +356,19 @@ static int exc3000_probe(struct i2c_client *client)
> > if (error)
> > return error;
> >
> > + for (retry = 0; retry < 3; ++retry) {
>
> Just curious, is it known to fail and need retries?

No, but a single I²C transmission can always go bad and in that case
it makes sense to recover instead of failing to load the driver. Other
buses (e.g. PCI) handle this transparently, but I²C does not.

-- Sebastian

>
> > + error = exc3000_get_model(data);
> > + if (!error)
> > + break;
> > + dev_warn(&client->dev, "Retry %d get EETI EXC3000 model: %d\n",
> > + retry + 1, error);
> > + }
> > +
> > + if (error)
> > + return error;
> > +
> > + dev_dbg(&client->dev, "TS Model: %s", data->model);
> > +
> > return 0;
> > }
> >
> >
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-05-19 23:32    [W:0.059 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site