lkml.org 
[lkml]   [2020]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: RTL8723BS driver doesn't work for,me but I can help testing
From
Date
good morning

i got the new image from oleg(balbes150) 20200518 RC5  and some more
feedback

with my patch and oleg RC5 hotstart(shutdown now)  do not work with my
box ( wlan goes back to sleep mode always)

with my patch chance  1 of 5 till 1 of 3 that my wlan is up and not
sleep from cold start

with oleg chance 1 of 2 till 1of 3 from cold start that wlan is up  .
(maybe because of phandle order?)

i thing there is maybe a timming problem between  wlan dis , sdio  data
and  host wake up wlan .

it could be that GPIOAO_6 is the host wake up wlan ? is it possible to
change the activation order for the gpio pins by change it in dts ?

Tobias



Am 18.05.2020 um 22:37 schrieb Martin Blumenstingl:
> Hi Tobias,
>
> On Mon, May 18, 2020 at 7:59 AM Tobias Baumann <017623705678@o2online.de> wrote:
>> hi martin
>>
>> i activate your patch ; wlan works ; also with only edit GPIOX_11 wlan
>> works
>>
>> its now GPIO-402 out high ACTIVE_LOW ( 3.3V on pin12)
> great, thank you for doing the research!
>
> did you find out if GPIOAO_6 is needed at all?
> the 3.10 kernel enables it and sets it to HIGH. my understanding is
> that you didn't change this one so the output is still LOW.
> so I'm wondering if it is needed at all (I wouldn't be surprised if it
> was not needed, these 3.10 kernel .dts files seem to be copy&pasted
> from various vendors and do not necessarily reflect the actual
> hardware setup inside the box)
>
>> i also attached the performance infos Wlan0->Router and RAM->SDHC
> that's pretty good, great to see that it works fine for you :-)
>
>
> Martin
>

--
Diese E-Mail wurde von AVG auf Viren geprüft.
http://www.avg.com

\
 
 \ /
  Last update: 2020-05-19 08:22    [W:1.267 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site