lkml.org 
[lkml]   [2020]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 3/3] perf docs: introduce security.txt file to document related issues
Em Thu, Apr 30, 2020 at 10:16:34AM +0300, Alexey Budankov escreveu:
>
> Publish instructions on how to apply LSM hooks for access control
> to perf_event_open() syscall on Fedora distro with Targeted SELinux
> policy and then manage access to the syscall.

I'm fixing these up:

[acme@five perf]$ am /wb/1.patch
Applying: perf docs: introduce security.txt file to document related issues
.git/rebase-apply/patch:46: space before tab in indent.
wake_alarm
.git/rebase-apply/patch:47: space before tab in indent.
block_suspend
.git/rebase-apply/patch:48: space before tab in indent.
audit_read
.git/rebase-apply/patch:51: trailing whitespace.

.git/rebase-apply/patch:54: trailing whitespace.


> Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
> ---
> tools/perf/Documentation/security.txt | 237 ++++++++++++++++++++++++++
> 1 file changed, 237 insertions(+)
> create mode 100644 tools/perf/Documentation/security.txt
>
> diff --git a/tools/perf/Documentation/security.txt b/tools/perf/Documentation/security.txt
> new file mode 100644
> index 000000000000..4fe3b8b1958f
> --- /dev/null
> +++ b/tools/perf/Documentation/security.txt
> @@ -0,0 +1,237 @@
> +Overview
> +========
> +
> +For general security related questions of perf_event_open() syscall usage,
> +performance monitoring and observability operations by Perf see here:
> +https://www.kernel.org/doc/html/latest/admin-guide/perf-security.html
> +
> +Enabling LSM based mandatory access control (MAC) to perf_event_open() syscall
> +==============================================================================
> +
> +LSM hooks for mandatory access control for perf_event_open() syscall can be
> +used starting from Linux v5.3. Below are the steps to extend Fedora (v31) with
> +Targeted policy with perf_event_open() access control capabilities:
> +
> +1. Download selinux-policy SRPM package (e.g. selinux-policy-3.14.4-48.fc31.src.rpm on FC31)
> + and install it so rpmbuild directory would exist in the current working directory:
> +
> + # rpm -Uhv selinux-policy-3.14.4-48.fc31.src.rpm
> +
> +2. Get into rpmbuild/SPECS directory and unpack the source code:
> +
> + # rpmbuild -bp selinux-policy.spec
> +
> +3. Place patch below at rpmbuild/BUILD/selinux-policy-b86eaaf4dbcf2d51dd4432df7185c0eaf3cbcc02
> + directory and apply it:
> +
> + # patch -p1 < selinux-policy-perf-events-perfmon.patch
> + patching file policy/flask/access_vectors
> + patching file policy/flask/security_classes
> + # cat selinux-policy-perf-events-perfmon.patch
> +diff -Nura a/policy/flask/access_vectors b/policy/flask/access_vectors
> +--- a/policy/flask/access_vectors 2020-02-04 18:19:53.000000000 +0300
> ++++ b/policy/flask/access_vectors 2020-02-28 23:37:25.000000000 +0300
> +@@ -174,6 +174,7 @@
> + wake_alarm
> + block_suspend
> + audit_read
> ++ perfmon
> + }
> +
> + #
> +@@ -1099,3 +1100,15 @@
> +
> + class xdp_socket
> + inherits socket
> ++
> ++class perf_event
> ++{
> ++ open
> ++ cpu
> ++ kernel
> ++ tracepoint
> ++ read
> ++ write
> ++}
> ++
> ++
> +diff -Nura a/policy/flask/security_classes b/policy/flask/security_classes
> +--- a/policy/flask/security_classes 2020-02-04 18:19:53.000000000 +0300
> ++++ b/policy/flask/security_classes 2020-02-28 21:35:17.000000000 +0300
> +@@ -200,4 +200,6 @@
> +
> + class xdp_socket
> +
> ++class perf_event
> ++
> + # FLASK
> +
> +4. Get into rpmbuild/SPECS directory and build policy packages from patched sources:
> +
> + # rpmbuild --noclean --noprep -ba selinux-policy.spec
> +
> + so you have this:
> +
> + # ls -alh rpmbuild/RPMS/noarch/
> + total 33M
> + drwxr-xr-x. 2 root root 4.0K Mar 20 12:16 .
> + drwxr-xr-x. 3 root root 4.0K Mar 20 12:16 ..
> + -rw-r--r--. 1 root root 112K Mar 20 12:16 selinux-policy-3.14.4-48.fc31.noarch.rpm
> + -rw-r--r--. 1 root root 1.2M Mar 20 12:17 selinux-policy-devel-3.14.4-48.fc31.noarch.rpm
> + -rw-r--r--. 1 root root 2.3M Mar 20 12:17 selinux-policy-doc-3.14.4-48.fc31.noarch.rpm
> + -rw-r--r--. 1 root root 12M Mar 20 12:17 selinux-policy-minimum-3.14.4-48.fc31.noarch.rpm
> + -rw-r--r--. 1 root root 4.5M Mar 20 12:16 selinux-policy-mls-3.14.4-48.fc31.noarch.rpm
> + -rw-r--r--. 1 root root 111K Mar 20 12:16 selinux-policy-sandbox-3.14.4-48.fc31.noarch.rpm
> + -rw-r--r--. 1 root root 14M Mar 20 12:17 selinux-policy-targeted-3.14.4-48.fc31.noarch.rpm
> +
> +5. Install SELinux packages from Fedora repo, if not already done so, and
> + update with the patched rpms above:
> +
> + # rpm -Uhv rpmbuild/RPMS/noarch/selinux-policy-*
> +
> +6. Enable SELinux Permissive mode for Targeted policy, if not already done so:
> +
> + # cat /etc/selinux/config
> +
> + # This file controls the state of SELinux on the system.
> + # SELINUX= can take one of these three values:
> + # enforcing - SELinux security policy is enforced.
> + # permissive - SELinux prints warnings instead of enforcing.
> + # disabled - No SELinux policy is loaded.
> + SELINUX=permissive
> + # SELINUXTYPE= can take one of these three values:
> + # targeted - Targeted processes are protected,
> + # minimum - Modification of targeted policy. Only selected processes are protected.
> + # mls - Multi Level Security protection.
> + SELINUXTYPE=targeted
> +
> +7. Enable filesystem SELinux labeling at the next reboot:
> +
> + # touch /.autorelabel
> +
> +8. Reboot machine and it will label filesystems and load Targeted policy into the kernel;
> +
> +9. Login and check that dmesg output doesn't mention that perf_event class is unknown to SELinux subsystem;
> +
> +10. Check that SELinux is enabled and in Permissive mode
> +
> + # getenforce
> + Permissive
> +
> +11. Turn SELinux into Enforcing mode:
> +
> + # setenforce 1
> + # getenforce
> + Enforcing
> +
> +Opening access to perf_event_open() syscall on Fedora with SELinux
> +==================================================================
> +
> +Access to performance monitoring and observability operations by Perf
> +can be limited for superuser or CAP_PERFMON or CAP_SYS_ADMIN privileged
> +processes. MAC policy settings (e.g. SELinux) can be loaded into the kernel
> +and prevent unauthorized access to perf_event_open() syscall. In such case
> +Perf tool provides a message similar to the one below:
> +
> + # perf stat
> + Error:
> + Access to performance monitoring and observability operations is limited.
> + Enforced MAC policy settings (SELinux) can limit access to performance
> + monitoring and observability operations. Inspect system audit records for
> + more perf_event access control information and adjusting the policy.
> + Consider adjusting /proc/sys/kernel/perf_event_paranoid setting to open
> + access to performance monitoring and observability operations for users
> + without CAP_PERFMON or CAP_SYS_ADMIN Linux capability.
> + perf_event_paranoid setting is -1:
> + -1: Allow use of (almost) all events by all users
> + Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
> + >= 0: Disallow raw and ftrace function tracepoint access
> + >= 1: Disallow CPU event access
> + >= 2: Disallow kernel profiling
> + To make the adjusted perf_event_paranoid setting permanent preserve it
> + in /etc/sysctl.conf (e.g. kernel.perf_event_paranoid = <setting>)
> +
> +To make sure that access is limited by MAC policy settings inspect system
> +audit records using journalctl command or /var/log/audit/audit.log so the
> +output would contain AVC denied records related to perf_event:
> +
> + # journalctl --reverse --no-pager | grep perf_event
> +
> + python3[1318099]: SELinux is preventing perf from open access on the perf_event labeled unconfined_t.
> + If you believe that perf should be allowed open access on perf_event labeled unconfined_t by default.
> + setroubleshoot[1318099]: SELinux is preventing perf from open access on the perf_event labeled unconfined_t. For complete SELinux messages run: sealert -l 4595ce5b-e58f-462c-9d86-3bc2074935de
> + audit[1318098]: AVC avc: denied { open } for pid=1318098 comm="perf" scontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 tcontext=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 tclass=perf_event permissive=0
> +
> +In order to open access to perf_event_open() syscall MAC policy settings can
> +require to be extended. On SELinux system this can be done by loading a special
> +policy module extending base policy settings. Perf related policy module can
> +be generated using the system audit records about blocking perf_event access.
> +Run the command below to generate my-perf.te policy extension file with
> +perf_event related rules:
> +
> + # ausearch -c 'perf' --raw | audit2allow -M my-perf && cat my-perf.te
> +
> + module my-perf 1.0;
> +
> + require {
> + type unconfined_t;
> + class perf_event { cpu kernel open read tracepoint write };
> + }
> +
> + #============= unconfined_t ==============
> + allow unconfined_t self:perf_event { cpu kernel open read tracepoint write };
> +
> +Now compile, pack and load my-perf.pp extension module into the kernel:
> +
> + # checkmodule -M -m -o my-perf.mod my-perf.te
> + # semodule_package -o my-perf.pp -m my-perf.mod
> + # semodule -X 300 -i my-perf.pp
> +
> +After all those taken steps above access to perf_event_open() syscall should
> +now be allowed by the policy settings. Check access running Perf like this:
> +
> + # perf stat
> + ^C
> + Performance counter stats for 'system wide':
> +
> + 36,387.41 msec cpu-clock # 7.999 CPUs utilized
> + 2,629 context-switches # 0.072 K/sec
> + 57 cpu-migrations # 0.002 K/sec
> + 1 page-faults # 0.000 K/sec
> + 263,721,559 cycles # 0.007 GHz
> + 175,746,713 instructions # 0.67 insn per cycle
> + 19,628,798 branches # 0.539 M/sec
> + 1,259,201 branch-misses # 6.42% of all branches
> +
> + 4.549061439 seconds time elapsed
> +
> +The generated perf-event.pp related policy extension module can be removed
> +from the kernel using this command:
> +
> + # semodule -X 300 -r my-perf
> +
> +Alternatively the module can be temporarily disabled and enabled back using
> +these two commands:
> +
> + # semodule -d my-perf
> + # semodule -e my-perf
> +
> +If something went wrong
> +=======================
> +
> +To turn SELinux into Permissive mode:
> + # setenforce 0
> +
> +To fully disable SELinux during kernel boot [3] set kernel command line parameter selinux=0
> +
> +To remove SELinux labeling from local filesystems:
> + # find / -mount -print0 | xargs -0 setfattr -h -x security.selinux
> +
> +To fully turn SELinux off a machine set SELINUX=disabled at /etc/selinux/config file and reboot;
> +
> +Links
> +=====
> +
> +[1] https://download-ib01.fedoraproject.org/pub/fedora/linux/updates/31/Everything/SRPMS/Packages/s/selinux-policy-3.14.4-49.fc31.src.rpm
> +[2] https://docs.fedoraproject.org/en-US/Fedora/11/html/Security-Enhanced_Linux/sect-Security-Enhanced_Linux-Working_with_SELinux-Enabling_and_Disabling_SELinux.html
> +[3] https://danwalsh.livejournal.com/10972.html
> --
> 2.24.1
>
>

--

- Arnaldo

\
 
 \ /
  Last update: 2020-05-18 18:00    [W:0.305 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site