lkml.org 
[lkml]   [2020]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/3] dt-bindings: timer: Convert i.MX TPM to json-schema
Date
> From: Anson Huang <Anson.Huang@nxp.com>
> Sent: Monday, May 18, 2020 10:48 PM
>
> Convert the i.MX TPM binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> .../devicetree/bindings/timer/nxp,tpm-timer.txt | 28 ----------
> .../devicetree/bindings/timer/nxp,tpm-timer.yaml | 63
> ++++++++++++++++++++++
> 2 files changed, 63 insertions(+), 28 deletions(-) delete mode 100644
> Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
> create mode 100644
> Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
>
> diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
> b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
> deleted file mode 100644
> index f82087b..0000000
> --- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -NXP Low Power Timer/Pulse Width Modulation Module (TPM)
> -
> -The Timer/PWM Module (TPM) supports input capture, output compare, -and
> the generation of PWM signals to control electric motor and power
> -management applications. The counter, compare and capture registers -are
> clocked by an asynchronous clock that can remain enabled in low -power modes.
> TPM can support global counter bus where one TPM drives -the counter bus for
> the others, provided bit width is the same.
> -
> -Required properties:
> -
> -- compatible : should be "fsl,imx7ulp-tpm"
> -- reg : Specifies base physical address and size of the register sets
> - for the clock event device and clock source device.
> -- interrupts : Should be the clock event device interrupt.
> -- clocks : The clocks provided by the SoC to drive the timer, must contain
> - an entry for each entry in clock-names.
> -- clock-names : Must include the following entries: "ipg" and "per".
> -
> -Example:
> -tpm5: tpm@40260000 {
> - compatible = "fsl,imx7ulp-tpm";
> - reg = <0x40260000 0x1000>;
> - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
> - <&clks IMX7ULP_CLK_LPTPM5>;
> - clock-names = "ipg", "per";
> -};
> diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
> b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
> new file mode 100644
> index 0000000..0d34610
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2

[...]

> +
> +title: NXP Low Power Timer/Pulse Width Modulation Module (TPM)
> +
> +maintainers:
> + - Dong Aisheng <aisheng.dong@nxp.com>
> +
> +description: |
> + The Timer/PWM Module (TPM) supports input capture, output compare,
> + and the generation of PWM signals to control electric motor and power
> + management applications. The counter, compare and capture registers
> + are clocked by an asynchronous clock that can remain enabled in low
> + power modes. TPM can support global counter bus where one TPM drives
> + the counter bus for the others, provided bit width is the same.
> +
> +properties:
> + compatible:
> + const: fsl,imx7ulp-tpm
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: SoC TPM ipg clock
> + - description: SoC TPM per clock

> + maxItems: 2

Unneeded line

> +
> + clock-names:
> + items:
> + - const: ipg
> + - const: per

> + maxItems: 2

Ditto

Otherwise:

Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>

Regards
Aisheng

> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx7ulp-clock.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + timer@40260000 {
> + compatible = "fsl,imx7ulp-tpm";
> + reg = <0x40260000 0x1000>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
> + <&pcc2 IMX7ULP_CLK_LPTPM5>;
> + clock-names = "ipg", "per";
> + };
> --
> 2.7.4

\
 
 \ /
  Last update: 2020-05-19 04:50    [W:0.072 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site