lkml.org 
[lkml]   [2020]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 05/14] remoteproc: Refactor function rproc_fw_boot()
On Fri 15 May 12:46 PDT 2020, Mathieu Poirier wrote:

> On Wed, May 13, 2020 at 07:10:55PM -0700, Bjorn Andersson wrote:
> > On Fri 08 May 14:27 PDT 2020, Mathieu Poirier wrote:
> >
> > > On Tue, May 05, 2020 at 05:33:41PM -0700, Bjorn Andersson wrote:
> > > > On Fri 24 Apr 13:01 PDT 2020, Mathieu Poirier wrote:
> > > >
> > > > > Refactor function rproc_fw_boot() in order to better reflect the work
> > > > > that is done when supporting scenarios where the remoteproc core is
> > > > > synchronising with a remote processor.
> > > > >
> > > > > Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> > > > > ---
> > > > > drivers/remoteproc/remoteproc_core.c | 10 ++++++----
> > > > > 1 file changed, 6 insertions(+), 4 deletions(-)
> > > > >
> > > > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> > > > > index a02593b75bec..e90a21de9de1 100644
> > > > > --- a/drivers/remoteproc/remoteproc_core.c
> > > > > +++ b/drivers/remoteproc/remoteproc_core.c
> > > > > @@ -1370,9 +1370,9 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
> > > > > }
> > > > >
> > > > > /*
> > > > > - * take a firmware and boot a remote processor with it.
> > > > > + * boot or synchronise with a remote processor.
> > > > > */
> > > > > -static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
> > > > > +static int rproc_actuate_device(struct rproc *rproc, const struct firmware *fw)
> > > >
> > > > Per patch 4 this function will if rproc_needs_syncing() be called with
> > > > fw == NULL, it's not obvious to me that the various operations on "fw"
> > > > in this function are valid anymore.
> > >
> > > That is right, all firmware related operations in this function are found in
> > > remoteproc_internal.h where the value of rproc->sync_with_mcu is checked before
> > > moving forward. That allows us to avoid introducing a new function similar to
> > > rproc_fw_boot() but without firmware operations or peppering the code with if
> > > statements.
> > >
> >
> > As I wrote in my other reply, the two mechanisms seems to consist of the
> > following steps:
> >
> > boot the core:
> > 1) request firmware
> > 2) prepare device
> > 3) parse fw
> > 4) handle resources
> > 5) allocate carveouts
> > 6) load segments
> > 7) find resource table
> > 8) prepare subdevices
> > 9) power on
> > 10) start subdevices
> >
> > sync:
> > 1) prepare device (?)
> > 2) handle resources
> > 3) allocate carveouts (?)
> > 4) prepare subdevices
> > 5) attach
> > 6) start subdevices
> >
> > Rather than relying on the state flag and missing ops will turn the
> > first list into the second list I conceptually prefer having two
> > separate functions that are easy to reason about.
>
> I reflected long and hard about doing just that...
>
> >
> > But I haven't done any refactoring or implemented this, so in practice
> > the two might just be a lot of duplication(?)
>
> Exactly - duplication and maintenance are my prime concern. Right now some
> functions in the OFFLINE -> RUNNING are clearly not needed when dealing with a
> DETACHED -> RUNNING scenarios, but with I am convinced people will find ways to
> do something creative with the callbacks.

I'm sure there are problems out there that will require creative
solutions, but I would prefer that we keep things easy to reason about
and ensure that as new problems arise we can evolve the framework.

> In the end I fear the new functions
> we spin off to deal with DETACHED -> RUNNING scenarios will end up looking very
> similar to the current implementation.
>

In those scenarios I don't see a problem with the platform drivers
having functions of common code shared between ops->start and
ops->attach.

> With that in mind I simply did all the work in remoteproc_internal.h and left
> the core functions intact.
>
> We can try spinning off new functions in the next revision, just to test my
> theory and see how much gets duplicated.
>

Looking forward to it!

> >
> > > >
> > > > > {
> > > > > struct device *dev = &rproc->dev;
> > > > > const char *name = rproc->firmware;
> > > > > @@ -1382,7 +1382,9 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
> > > > > if (ret)
> > > > > return ret;
> > > > >
> > > > > - dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
> > > > > + if (!rproc_needs_syncing(rproc))
> > > >
> > > > Can't we make this check on fw, to make the relationship "if we where
> > > > passed a firmware object, we're going to load and boot that firmware"?
> > >
> > > It can but I specifically decided to use rproc_needs_syncing() to be consistent
> > > with the rest of the patchset. That way all we need to do is grep for
> > > rproc_needs_syncing to get all the places where a decision about synchronising
> > > with a remote processor is made.
> > >
> >
> > Conceptually we have a single "to sync or not to sync", but I think
> > we're invoking rproc_needs_syncing() 8 times during rproc_fw_boot() and
> > each of those operations may or may not do anything.
>
> As I said above, I'll try spinning off new functions in the next revision. From
> there we can decide how best to move forward.
>
> >
> > There are certain operations where I see it makes sense for a driver to
> > either implement or not, but I think that e.g. for a rproc in OFFLINE
> > state we should just require ops->start to be specified - because it
> > doesn't make sense to enter rproc_start() if ops->start is a nop.
>
> At this time ops->start() doesn't have to be specified... But as you say it
> won't do much good and this is something we can easily spot when reviewing
> patches.
>

Presumably after implementing this support we should check during
registration that there's either a start or an attach ops specified. And
if there's no start we shouldn't allow the RUNNING->OFFLINE transition.

> Thanks for the review,

Thanks for working on this and sorry that it took me time really digest
this.

Regards,
Bjorn

> Mathieu
>
> >
> > Regards,
> > Bjorn
> >
> > > >
> > > > Regards,
> > > > Bjorn
> > > >
> > > > > + dev_info(dev, "Booting fw image %s, size %zd\n",
> > > > > + name, fw->size);
> > > > >
> > > > > /*
> > > > > * if enabling an IOMMU isn't relevant for this rproc, this is
> > > > > @@ -1818,7 +1820,7 @@ int rproc_boot(struct rproc *rproc)
> > > > > }
> > > > > }
> > > > >
> > > > > - ret = rproc_fw_boot(rproc, firmware_p);
> > > > > + ret = rproc_actuate_device(rproc, firmware_p);
> > > > >
> > > > > release_firmware(firmware_p);
> > > > >
> > > > > --
> > > > > 2.20.1
> > > > >

\
 
 \ /
  Last update: 2020-05-19 02:24    [W:0.097 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site