Messages in this thread | | | From | Lars Povlsen <> | Subject | Re: [PATCH 2/3] pinctrl: mchp-sgpio: Add pinctrl driver for Microsemi Serial GPIO | Date | Mon, 18 May 2020 21:44:23 +0200 |
| |
Randy Dunlap writes:
> On 5/13/20 7:11 AM, Lars Povlsen wrote: >> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig >> index 834c59950d1cf..2b0e9021fd7e0 100644 >> --- a/drivers/pinctrl/Kconfig >> +++ b/drivers/pinctrl/Kconfig >> @@ -396,6 +396,23 @@ config PINCTRL_OCELOT >> select OF_GPIO >> select REGMAP_MMIO >> >> +config PINCTRL_MSCC_SGPIO >> + bool "Pinctrl driver for Microsemi Serial GPIO" >> + depends on OF >> + depends on HAS_IOMEM >> + select GPIOLIB >> + select GENERIC_PINCONF >> + select GENERIC_PINCTRL_GROUPS >> + select GENERIC_PINMUX_FUNCTIONS >> + select OF_GPIO >> + help >> + Support for the VCoreIII SoC serial GPIO device. By using a > > Line above should be indented with one tab + 2 spaces... > like the lines below. >
Well spotted...
>> + serial interface, the SIO controller significantly extends >> + the number of available GPIOs with a minimum number of >> + additional pins on the device. The primary purpose of the >> + SIO controller is to connect control signals from SFP >> + modules and to act as an LED controller. >> + > > thanks.
Thank you for your comments.
-- Lars Povlsen, Microchip
| |