lkml.org 
[lkml]   [2020]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.6 050/194] net: broadcom: Select BROADCOM_PHY for BCMGENET
Date
From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 99addbe31f5524494f4d7077bcb3f6fa64c5d160 ]

The GENET controller on the Raspberry Pi 4 (2711) is typically
interfaced with an external Broadcom PHY via a RGMII electrical
interface. To make sure that delays are properly configured at the PHY
side, ensure that we the dedicated Broadcom PHY driver
(CONFIG_BROADCOM_PHY) is enabled for this to happen.

Fixes: 402482a6a78e ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/Kconfig | 1 +
1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -69,6 +69,7 @@ config BCMGENET
select BCM7XXX_PHY
select MDIO_BCM_UNIMAC
select DIMLIB
+ select BROADCOM_PHY if ARCH_BCM2835
help
This driver supports the built-in Ethernet MACs found in the
Broadcom BCM7xxx Set Top Box family chipset.

\
 
 \ /
  Last update: 2020-05-18 20:02    [W:0.490 / U:1.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site