lkml.org 
[lkml]   [2020]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] dt-bindings: thermal: tsens: Add zeroc interrupt support in yaml
On 2020-05-05 17:41, Amit Kucheria wrote:
> On Tue, May 5, 2020 at 4:43 PM Manaf Meethalavalappu Pallikunhi
> <manafm@codeaurora.org> wrote:
>>
>> Add 0C (zeroc) interrupt support for tsens in yaml.
>>
>> Signed-off-by: Manaf Meethalavalappu Pallikunhi
>> <manafm@codeaurora.org>
>> ---
>> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 7 +++++--
>> 1 file changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> index 2ddd39d96766..8a0893f77d20 100644
>> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> @@ -52,12 +52,14 @@ properties:
>> items:
>> - description: Combined interrupt if upper or lower threshold
>> crossed
>> - description: Interrupt if critical threshold crossed
>> + - description: Interrupt if zeroC threshold is crossed
>>
>> interrupt-names:
>> minItems: 1
>> items:
>> - const: uplow
>> - const: critical
>> + - const: zeroc
>>
>> nvmem-cells:
>> minItems: 1
>> @@ -168,8 +170,9 @@ examples:
>> <0xc222000 0x1ff>;
>>
>> interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
>> - <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
>> - interrupt-names = "uplow", "critical";
>> + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "uplow", "critical", "zeroc";
>
>
> Add a new example for v2 with 0C interrupt here instead of reusing the
> old one.
Done
>
>> #qcom,sensors = <13>;
>> #thermal-sensor-cells = <1>;
>> --
>> 2.26.2

\
 
 \ /
  Last update: 2020-05-17 12:30    [W:0.063 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site