lkml.org 
[lkml]   [2020]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: interrupt-controller: Convert imx irqsteer to json-schema
Date
Convert the i.MX IRQSTEER binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
.../bindings/interrupt-controller/fsl,irqsteer.txt | 35 ---------
.../interrupt-controller/fsl,irqsteer.yaml | 87 ++++++++++++++++++++++
2 files changed, 87 insertions(+), 35 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
deleted file mode 100644
index 582991c..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Freescale IRQSTEER Interrupt multiplexer
-
-Required properties:
-
-- compatible: should be:
- - "fsl,imx8m-irqsteer"
- - "fsl,imx-irqsteer"
-- reg: Physical base address and size of registers.
-- interrupts: Should contain the up to 8 parent interrupt lines used to
- multiplex the input interrupts. They should be specified sequentially
- from output 0 to 7.
-- clocks: Should contain one clock for entry in clock-names
- see Documentation/devicetree/bindings/clock/clock-bindings.txt
-- clock-names:
- - "ipg": main logic clock
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
- interrupt source. The value must be 1.
-- fsl,channel: The output channel that all input IRQs should be steered into.
-- fsl,num-irqs: Number of input interrupts of this channel.
- Should be multiple of 32 input interrupts and up to 512 interrupts.
-
-Example:
-
- interrupt-controller@32e2d000 {
- compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
- reg = <0x32e2d000 0x1000>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
- clock-names = "ipg";
- fsl,channel = <0>;
- fsl,num-irqs = <64>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
new file mode 100644
index 0000000..a2bc723
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IRQSTEER Interrupt multiplexer
+
+maintainers:
+ - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+ compatible:
+ const: fsl,imx-irqsteer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ should contain the up to 8 parent interrupt lines used to multiplex
+ the input interrupts. They should be specified sequentially from
+ output 0 to 7.
+ items:
+ - description: irqsteer channel 0
+ - description: irqsteer channel 1
+ - description: irqsteer channel 2
+ - description: irqsteer channel 3
+ - description: irqsteer channel 4
+ - description: irqsteer channel 5
+ - description: irqsteer channel 6
+ - description: irqsteer channel 7
+ minItems: 1
+ maxItems: 8
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ipg
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ fsl,channel:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: |
+ u32 value representing the output channel that all input IRQs should be
+ steered into.
+
+ fsl,num-irqs:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: |
+ u32 value representing the number of input interrupts of this channel,
+ should be multiple of 32 input interrupts and up to 512 interrupts.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - interrupt-controller
+ - "#interrupt-cells"
+ - fsl,channel
+ - fsl,num-irqs
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mq-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ interrupt-controller@32e2d000 {
+ compatible = "fsl,imx-irqsteer";
+ reg = <0x32e2d000 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+ clock-names = "ipg";
+ fsl,channel = <0>;
+ fsl,num-irqs = <64>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
--
2.7.4
\
 
 \ /
  Last update: 2020-05-18 04:22    [W:0.044 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site