lkml.org 
[lkml]   [2020]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] serial: 8250: Add rs485 emulation to 8250_dw
Date
This series tries to revive the work of Giulio Benetti from 2018 [0]
which seemed to have stalled at that time.

The board I needed that on also had the additional caveat that it
uses non-standard pins for DE/RE so needed gpio mctrl layer as well
and even more special needed to control the RE pin manually not as
part of it being connected to the DE signal as seems to be the standard.

Depends on Lukas Wunner's series adding the rs485 bus term gpio:
https://lore.kernel.org/r/cover.1588505407.git.lukas@wunner.de

changes in v3:
- wording fixes for dt-binding (Andy)
- maxItems 1 in dt-binding (Lukas)
- use devm_gpiod_get_optional (Andy)
- remove unneeded gpio checks (Andy)
- use GPIOD_OUT_HIGH for initial value (Lukas)
- split loop-reading into the existing timer infrastructure

Changes in v2:
- move to recent rs485 improvements in tty-next
- added a capability for TEMT interrupt presence
- external gpio for optional receiver-enable handling
- timeout polling via the generic readx_poll_timeout

Changes from the 2018 submission include:
- add timeout when waiting for fifos to clear using a new helper
- move on-boot enablement of the rs485 mode to after registering
the port. This saves having to copy the em485 struct as done
originally, which also ran into spinlock-debug warnings when testing
and also makes it actually possible to use the mctrl gpio layer
for non-standard gpios.


Giulio Benetti (2):
serial: 8250: Handle implementations not having TEMT interrupt using
em485
serial: 8250_dw: add em485 support

Heiko Stuebner (3):
serial: 8520_port: Fix function param documentation
dt-bindings: serial: Add binding for rs485 receiver enable GPIO
serial: 8250: Support separate rs485 rx-enable GPIO

.../devicetree/bindings/serial/rs485.yaml | 4 ++
drivers/tty/serial/8250/8250.h | 1 +
drivers/tty/serial/8250/8250_bcm2835aux.c | 2 +-
drivers/tty/serial/8250/8250_dw.c | 3 +
drivers/tty/serial/8250/8250_of.c | 2 +
drivers/tty/serial/8250/8250_omap.c | 2 +-
drivers/tty/serial/8250/8250_port.c | 60 ++++++++++++++++---
drivers/tty/serial/serial_core.c | 10 ++++
include/linux/serial_core.h | 1 +
9 files changed, 76 insertions(+), 9 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2020-05-17 23:58    [W:0.121 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site