lkml.org 
[lkml]   [2020]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 19/28] dt-bindings: mmc: Convert sdhci-pxa to json-schema
On Wed, Mar 18, 2020 at 04:37:55PM -0600, Rob Herring wrote:
> On Tue, Mar 17, 2020 at 3:40 AM Lubomir Rintel <lkundrak@v3.sk> wrote:
> >
> > Convert the sdhci-pxa binding to DT schema format using json-schema.
>
> Ignore what my bot said, I see you addressed that earlier in the series.
>
> > At the same time, fix a couple of issues with the examples discovered by
> > the validation tool -- a semicolon instead of a comma and wrong node names.
> >
> > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> > ---
> > .../devicetree/bindings/mmc/sdhci-pxa.txt | 50 ---------
> > .../devicetree/bindings/mmc/sdhci-pxa.yaml | 101 ++++++++++++++++++
> > 2 files changed, 101 insertions(+), 50 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> > create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> > deleted file mode 100644
> > index 3d1b449d6097d..0000000000000
> > --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> > +++ /dev/null
> > @@ -1,50 +0,0 @@
> > -* Marvell sdhci-pxa v2/v3 controller
> > -
> > -This file documents differences between the core properties in mmc.txt
> > -and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
> > -
> > -Required properties:
> > -- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or
> > - "marvell,armada-380-sdhci".
> > -- reg:
> > - * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
> > - the SDHCI registers.
> > -
> > - * for "marvell,armada-380-sdhci", three register areas. The first
> > - one for the SDHCI registers themselves, the second one for the
> > - AXI/Mbus bridge registers of the SDHCI unit, the third one for the
> > - SDIO3 Configuration register
> > -- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
> > - for "marvell,armada-380-sdhci"
> > -- clocks: Array of clocks required for SDHCI; requires at least one for
> > - I/O clock.
> > -- clock-names: Array of names corresponding to clocks property; shall be
> > - "io" for I/O clock and "core" for optional core clock.
> > -
> > -Optional properties:
> > -- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
> > -
> > -Example:
> > -
> > -sdhci@d4280800 {
> > - compatible = "mrvl,pxav3-mmc";
> > - reg = <0xd4280800 0x800>;
> > - bus-width = <8>;
> > - interrupts = <27>;
> > - clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
> > - clock-names = "io", "core";
> > - non-removable;
> > - mrvl,clk-delay-cycles = <31>;
> > -};
> > -
> > -sdhci@d8000 {
> > - compatible = "marvell,armada-380-sdhci";
> > - reg-names = "sdhci", "mbus", "conf-sdio3";
> > - reg = <0xd8000 0x1000>,
> > - <0xdc000 0x100>;
> > - <0x18454 0x4>;
> > - interrupts = <0 25 0x4>;
> > - clocks = <&gateclk 17>;
> > - clock-names = "io";
> > - mrvl,clk-delay-cycles = <0x1F>;
> > -};
> > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
> > new file mode 100644
> > index 0000000000000..4ae0926ac294f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
> > @@ -0,0 +1,101 @@
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Marvell PXA SDHCI v2/v3 bindings
> > +
> > +maintainers:
> > + - devicetree@vger.kernel.org
> > +
> > +allOf:
> > + - $ref: mmc-controller.yaml#
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: marvell,armada-380-sdhci
> > + then:
> > + properties:
> > + regs:
> > + minItems: 3
> > + maxItems: 3
>
> Here, you just need minItems.
>
> > + reg-names:
> > + items:
> > + - const: sdhci
> > + - const: mbus
> > + - const: conf-sdio3
>
> This should be under the main definition of 'reg-names' and then just
> 'minItems: 3' here.
>
> > + required:
> > + - reg-names
> > + else:
> > + properties:
> > + regs:
> > + minItems: 1
> > + maxItems: 1
>
> Just 'maxItems' is sufficient.
>
> > + reg-names:
> > + minItems: 1
> > + maxItems: 1
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - mrvl,pxav2-mmc
> > + - mrvl,pxav3-mmc
> > + - marvell,armada-380-sdhci
> > +
> > + reg: true
>
> Here you should have:
>
> minItems: 1
> maxItems: 3
>
> > +
> > + reg-names: true
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + minItems: 1
> > + maxItems: 2
> > +
> > + clock-names:
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + - const: io
> > + - const: core
> > +
> > + mrvl,clk-delay-cycles:
> > + description: Specify a number of cycles to delay for tuning.
> > + $ref: /schemas/types.yaml#/definitions/uint32
>
> No range of valid values?

No. The document I'm converting didn't specify a range. For some of the
hardware supported Marvell doesn't provide documentation, and the
drivers that use this seem to accept any u32 number.

If this needs a range, then I need to make something up. I can do that,
but it will be difficult to defend that number if anyone asks.

Lubo

\
 
 \ /
  Last update: 2020-05-17 20:37    [W:0.169 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site