lkml.org 
[lkml]   [2020]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] iio: dac: ad5761: Replace indio_dev->mlock with own device lock
On Thu, 14 May 2020 12:10:28 +0300
Sergiu Cuciurean <sergiu.cuciurean@analog.com> wrote:

> As part of the general cleanup of indio_dev->mlock, this change replaces
> it with a local lock on the device's state structure.
>
> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Applied to the togreg branch of iio.git.

Thanks,

J
> ---
> drivers/iio/dac/ad5761.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/dac/ad5761.c b/drivers/iio/dac/ad5761.c
> index 4fb42b743f0f..67179944e5c5 100644
> --- a/drivers/iio/dac/ad5761.c
> +++ b/drivers/iio/dac/ad5761.c
> @@ -57,11 +57,13 @@ enum ad5761_supported_device_ids {
> * @use_intref: true when the internal voltage reference is used
> * @vref: actual voltage reference in mVolts
> * @range: output range mode used
> + * @lock lock to protect the data buffer during SPI ops
> * @data: cache aligned spi buffer
> */
> struct ad5761_state {
> struct spi_device *spi;
> struct regulator *vref_reg;
> + struct mutex lock;
>
> bool use_intref;
> int vref;
> @@ -124,9 +126,9 @@ static int ad5761_spi_write(struct iio_dev *indio_dev, u8 addr, u16 val)
> struct ad5761_state *st = iio_priv(indio_dev);
> int ret;
>
> - mutex_lock(&indio_dev->mlock);
> + mutex_lock(&st->lock);
> ret = _ad5761_spi_write(st, addr, val);
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&st->lock);
>
> return ret;
> }
> @@ -163,9 +165,9 @@ static int ad5761_spi_read(struct iio_dev *indio_dev, u8 addr, u16 *val)
> struct ad5761_state *st = iio_priv(indio_dev);
> int ret;
>
> - mutex_lock(&indio_dev->mlock);
> + mutex_lock(&st->lock);
> ret = _ad5761_spi_read(st, addr, val);
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&st->lock);
>
> return ret;
> }
> @@ -368,6 +370,8 @@ static int ad5761_probe(struct spi_device *spi)
> if (pdata)
> voltage_range = pdata->voltage_range;
>
> + mutex_init(&st->lock);
> +
> ret = ad5761_spi_set_range(st, voltage_range);
> if (ret)
> goto disable_regulator_err;

\
 
 \ /
  Last update: 2020-05-16 17:24    [W:0.034 / U:1.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site