lkml.org 
[lkml]   [2020]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next 0/2] DP83822 Fiber enablement
Date
Hello

The DP83822 Ethernet PHY has the ability to connect via a Fiber port. The
DP83825 or DP83826 do not have this ability. In order to keep the same
driver the DP83822 and the 825/826 phy_driver call backs need to be changed
so that the DP83822 has it's own call back for config_init and adds a probe
call back.

A devicetree binding was added to set the signal polarity for the fiber
connection. This property is only applicable in fiber mode and is optional
in fiber mode.

Dan

Dan Murphy (2):
dt-bindings: net: dp83822: Add TI dp83822 phy
net: phy: DP83822: Add ability to advertise Fiber connection

.../devicetree/bindings/net/ti,dp83822.yaml | 49 ++++++
drivers/net/phy/dp83822.c | 140 +++++++++++++++++-
2 files changed, 181 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ti,dp83822.yaml

--
2.26.2

\
 
 \ /
  Last update: 2020-05-14 19:41    [W:0.105 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site