lkml.org 
[lkml]   [2020]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 02/14] videobuf2: add cache management members
Date
From: Sergey Senozhatsky <senozhatsky@chromium.org>

Extend vb2_buffer and vb2_queue structs with cache management
members.

V4L2 UAPI already contains two buffer flags which user-space,
supposedly, can use to control buffer cache sync:

- V4L2_BUF_FLAG_NO_CACHE_INVALIDATE
- V4L2_BUF_FLAG_NO_CACHE_CLEAN

None of these, however, do anything at the moment. This patch
set is intended to change it.

Since user-space cache management hints are supposed to be
implemented on a per-buffer basis we need to extend vb2_buffer
struct with two new members ->need_cache_sync_on_prepare and
->need_cache_sync_on_finish, which will store corresponding
user-space hints.

In order to preserve the existing behaviour, user-space cache
managements flags will be handled only by those drivers that
permit user-space cache hints. That's the purpose of vb2_queue
->allow_cache_hints member. Driver must set ->allow_cache_hints
during queue initialisation to enable cache management hints
mechanism.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
---
include/media/videobuf2-core.h | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index 9e522bd2acc7..7f39d9fffc8c 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -263,6 +263,10 @@ struct vb2_buffer {
* after the 'buf_finish' op is called.
* copied_timestamp: the timestamp of this capture buffer was copied
* from an output buffer.
+ * need_cache_sync_on_prepare: when set buffer's ->prepare() function
+ * performs cache sync/invalidation.
+ * need_cache_sync_on_finish: when set buffer's ->finish() function
+ * performs cache sync/invalidation.
* queued_entry: entry on the queued buffers list, which holds
* all buffers queued from userspace
* done_entry: entry on the list that stores all buffers ready
@@ -273,6 +277,8 @@ struct vb2_buffer {
unsigned int synced:1;
unsigned int prepared:1;
unsigned int copied_timestamp:1;
+ unsigned int need_cache_sync_on_prepare:1;
+ unsigned int need_cache_sync_on_finish:1;

struct vb2_plane planes[VB2_MAX_PLANES];
struct list_head queued_entry;
@@ -491,6 +497,9 @@ struct vb2_buf_ops {
* @uses_requests: requests are used for this queue. Set to 1 the first time
* a request is queued. Set to 0 when the queue is canceled.
* If this is 1, then you cannot queue buffers directly.
+ * @allow_cache_hints: when set user-space can pass cache management hints in
+ * order to skip cache flush/invalidation on ->prepare() or/and
+ * ->finish().
* @lock: pointer to a mutex that protects the &struct vb2_queue. The
* driver can set this to a mutex to let the v4l2 core serialize
* the queuing ioctls. If the driver wants to handle locking
@@ -567,6 +576,7 @@ struct vb2_queue {
unsigned int requires_requests:1;
unsigned int uses_qbuf:1;
unsigned int uses_requests:1;
+ unsigned int allow_cache_hints:1;

struct mutex *lock;
void *owner;
--
2.26.2
\
 
 \ /
  Last update: 2020-05-14 18:03    [W:0.117 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site