lkml.org 
[lkml]   [2020]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 3/5] ARM: dts: stm32: enable ltdc binding with ili9341 on stm32429-disco board
Hi Alexandre,

On Thu, May 14, 2020 at 8:53 PM Alexandre Torgue
<alexandre.torgue@st.com> wrote:
>
>
>
> On 5/14/20 10:24 AM, Linus Walleij wrote:
> > On Tue, May 12, 2020 at 9:04 AM <dillon.minfei@gmail.com> wrote:
> >
> >> From: dillon min <dillon.minfei@gmail.com>
> >>
> >> Enable the ltdc & ili9341 on stm32429-disco board.
> >>
> >> Signed-off-by: dillon min <dillon.minfei@gmail.com>
> >
> > This mostly looks good but...
> >
> >> +&spi5 {
> >> + status = "okay";
> >> + pinctrl-0 = <&spi5_pins>;
> >> + pinctrl-names = "default";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + cs-gpios = <&gpioc 2 GPIO_ACTIVE_LOW>;
> >> + dmas = <&dma2 3 2 0x400 0x0>,
> >> + <&dma2 4 2 0x400 0x0>;
> >> + dma-names = "rx", "tx";
> >
> > These DMA assignments seem to be SoC things and should
> > rather be in the DTS(I) file where &spi5 is defined, right?
> > stm32f429.dtsi I suppose?
>
> I agree with Linus, DMA have to be defined in SoC dtsi. And if a board
> doesn't want to use it, we use the "delete-property".
Yes, will move to Soc dtsi in next submits.

i'm working on write a v4l2-m2m driver for dma2d of stm32 to support
pixel conversion
alpha blending between foreground and background graphics.

as you know, some soc's engineer trying to add this function to drm system.

do you know st's planning about soc's hardware accelerator driver on stm32mp?
such as chrom-art, will add to drm subsystem via ioctl to access, or to v4l2,

thanks.

>
> >
> > It is likely the same no matter which device is using spi5.
> >
> > Yours,
> > Linus Walleij
> >

\
 
 \ /
  Last update: 2020-05-14 15:08    [W:0.087 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site