lkml.org 
[lkml]   [2020]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/6] Add Stinger96 and IoT Box board support
From
Date
Hi Mani

On 5/3/20 5:42 PM, mani@kernel.org wrote:
> From: Manivannan Sadhasivam <mani@kernel.org>
>
> Hello,
>
> This series adds Stinger96 and IoT Box board support. These boards are
> based on STM32MP157A SoC, designed and manufactured by Shiratech solutions.
>
> The Stinger96 is a base board (96Boards IoT Extended edition) while IoT Box
> adds one mezzanine on top of it and sold as a gateway device.
>
> This series depends on below patchsets already submitted and gone through
> reviews:
>
> [PATCH v3 0/3] Add Reset and Wakeup support for CCS811
> [PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART
>
> More information about these boards can be found in below links:
>
> https://www.shiratech-solutions.com/products/stinger96/
> https://www.shiratech-solutions.com/products/iot-box/
>
> Thanks,
> Mani
>

Series applied on stm32-next.

Regards
Alex

> Changes in v2:
>
> * Used "stm32" prefix for all DT commits
> * Dropped custom sdmmc2 pinctrl node since existing node itself has pullup
> enabled and works fine.
>
> Manivannan Sadhasivam (6):
> dt-bindings: Add vendor prefix for Shiratech Solutions
> ARM: dts: stm32: Add missing pinctrl entries for STM32MP15
> dt-bindings: arm: stm32: Document Stinger96 compatible
> ARM: dts: stm32: Add Stinger96 board support
> dt-bindings: arm: stm32: Document IoT Box compatible
> ARM: dts: stm32: Add IoT Box board support
>
> .../devicetree/bindings/arm/stm32/stm32.yaml | 2 +
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 64 ++++
> arch/arm/boot/dts/stm32mp157a-iot-box.dts | 68 ++++
> arch/arm/boot/dts/stm32mp157a-stinger96.dts | 12 +
> arch/arm/boot/dts/stm32mp157a-stinger96.dtsi | 342 ++++++++++++++++++
> 7 files changed, 492 insertions(+)
> create mode 100644 arch/arm/boot/dts/stm32mp157a-iot-box.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
>

\
 
 \ /
  Last update: 2020-05-14 14:39    [W:0.092 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site