lkml.org 
[lkml]   [2020]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 1/3] dt-bindings: Add keypad devicetree documentation
Hi,

On 20-05-14 14:17, Fengping Yu wrote:
> From: "fengping.yu" <fengping.yu@mediatek.com>
>
> Add Mediatek matrix keypad dt-binding doc as yaml schema.
>
> Signed-off-by: fengping.yu <fengping.yu@mediatek.com>
> ---
> .../devicetree/bindings/input/mtk-kpd.yaml | 102 ++++++++++++++++++
> 1 file changed, 102 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/mtk-kpd.yaml b/Documentation/devicetree/bindings/input/mtk-kpd.yaml
> new file mode 100644
> index 000000000000..8f594fe0bfc2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/mtk-kpd.yaml
> @@ -0,0 +1,102 @@
> +%YAML 1.2
> +---
> +version: 1
> +
> +$id: http://devicetree.org/schemas/input/mtk-keypad.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek's Keypad Controller device tree bindings
> +
> +maintainer:
> + - Fengping Yu <fengping.yu@mediatek.com>
> +
> +description: |
> + Mediatek's Keypad controller is used to interface a SoC with a matrix-type
> + keypad device. The keypad controller supports multiple row and column lines.
> + A key can be placed at each intersection of a unique row and a unique column.
> + The keypad controller can sense a key-press and key-release and report the
> + event using a interrupt to the cpu.
> +
> +properties:
> + compatible:
> + constraint: |

enum or const ?

> + "mediatek,mt6779-keypad"
> + "mediatek, kp"
> +
> + clock-names:
> + description: Names of the clocks listed in clocks property in the same order
> +
> + clocks:
> + description: Must contain one entry, for the module clock
> + refs: devicetree/bindings/clocks/clock-bindings.txt for details.
> +
> + interrupts:
> + description: A single interrupt specifier
> +
> + linux,keymap:
> + description: The keymap for keys as described in the binding document
> + refs: devicetree/bindings/input/matrix-keymap.txt
> +
> + pinctrl-0:
> + description: Specify pin control groups used for this controller
> + refs: devicetree/bindings/pinctrl/pinctrl-bindings.txt
> +
> + pinctrl-names:
> + description: Names for optional pin modes
> +
> + reg:
> + description: The base address of the Keypad register bank
> +
> + wakeup-source:
> + description: use any event on keypad as wakeup event
> +
> + keypad,num-columns:
> + description: Number of column lines connected to the keypad controller,
> + it is not equal to PCB columns number, instead you should add required value
> + for each IC
> +
> + keypad,num-rows:
> + description: Number of row lines connected to the keypad controller, it is
> + not equal to PCB rows number, instead you should add required value for each IC
> +
> + mediatek,debounce-us:
> + description: Debounce interval in microseconds
> + maximum: 256000

I think that you are missing the maxItems on all your properties so we
can't make any validation. Also the indent looks wrong.

> +
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - mediatek,debounce-us
> + - keypad,num-rows
> + - keypad,num-columns
> + - linux,keymap
> + - pinctrl
> + - clocks
> + - clock-names
> +
> +optional:
> + - wakeup-source:

I think the optional can be dropped.

> +examples:
> + - |
> +
> + keypad: kp@10010000 {
> + compatible = "mediatek,kp";
> + reg = <0 0x10010000 0 0x1000>;
> + wakeup-source;
> + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>;
> + clocks = <&clk26m>;
> + clock-names = "kpd";
> + };
> +
> + &keypad {
> + mediatek,debounce-us = <32000>;
> + keypad,num-rows = <8>;
> + keypad,num-columns = <9>;
> + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_VOLUMEDOWN) >;
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&kpd_gpios_def_cfg>;
> + };

Pls squash those nodes.

Regards,
Marco

> --
> 2.18.0

\
 
 \ /
  Last update: 2020-05-14 11:31    [W:0.244 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site